[alsa-devel] [PATCH] add missing definitions(letters) to HD-Audio.txt

[Justin Mattock]

On Wed, Apr 15, 2009 at 8:56 AM, Randy Dunlap <randy.dunlap at oracle.com> wrote:
> Justin Mattock wrote:
>> On Wed, Apr 15, 2009 at 4:03 AM, Takashi Iwai <tiwai at suse.de> wrote:
>>> At Tue, 14 Apr 2009 14:31:21 -0700,
>>> Justin Mattock wrote:
>>>> impact: Add missing definitions(letters).
>>>>
>>>> Signed-off-by: Justin P. Mattock <justinmattock at gmail.com>
>>> Thanks, applied now.
>>>
>>> (BTW, your patch couldn't be applied cleanly, partly because of
>>>  a wrong format and partly because of your MUA breaking the lines...)
>>>
>>>
>>> Takashi
>>>
>>>> ---
>>>>  Documentation/sound/alsa/HD-Audio.txt | 3 +++
>>>>  1 files changed,3 insertions(+),0 deletions(-)
>>>>
>>>> ===========================================================================================
>>>> ---- Documentation/sound/alsa/HD-Audio.txt        2009-04-14
>>>> 17:03:14.000000000 -0700
>>>> ++++ Documentation/sound/alsa/HD-Audio.txt        2009-04-14
>>>> 21:15:22.000000000 -0700
>>>> @@ -162,7 +162,7 @@
>>>>  What `model` option values are available depends on the codec chip.
>>>>  Check your codec chip from the codec proc file (see "Codec Proc-File"
>>>>  section below).  It will show the vendor/product name of your codec
>>>> -chip.  Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file,
>>>> +chip.  Then, see Documentation/sound/alsa/HD-Audio-Models.txt file,
>>>>  the section of HD-audio driver.  You can find a list of codecs
>>>>  and `model` options belonging to each codec.  For example, for Realtek
>>>>  ALC262 codec chip, pass `model=ultra` for devices that are compatible
>>>> @@ -170,7 +170,7 @@
>>>>
>>>>  Thus, the first thing you can do for any brand-new, unsupported and
>>>>  non-working HD-audio hardware is to check HD-audio codec and several
>>>> -different `model` option values.  If you have a luck, some of them
>>>> +different `model` option values.  If you have any luck, some of them
>>>>  might suit with your device well.
>>>>
>>>>  Some codecs such as ALC880 have a special model option `model=test`.
>>>>
>>>> --
>>
>> I went diff -u file.old file.new
>> (I'm not sure how to generate the
>> 1 files changed,2 etc... stuff)
>
> It's listed in Documentation/SubmittingPatches:  /diffstat/
> along with the expected patch format etc.
> Please read/use it.
>
>> And yes I will be honest I didn't test the patch.
>> (figured it wasn't that complicated, and I was tired).
>>
>> If I find more I'll let you know.
>> (back to trying to get sound working on my imac).
>
>
> --
> ~Randy
>

alright.

-- 
Justin P. Mattock