[alsa-devel] [PATCH] AOA: Convert onyx and tas codecs to new-style i2c drivers
Jean Delvare
khali at linux-fr.org
Fri Apr 10 17:02:38 CEST 2009
On Thu, 9 Apr 2009 14:19:45 +0200, Jean Delvare wrote:
> From: Jean Delvare <khali at linux-fr.org>
> Subject: AOA: Convert onyx and tas codecs to new-style i2c drivers
>
> The legacy i2c binding model is going away soon, so convert the AOA
> codec drivers to the new model or they'll break.
>
> Signed-off-by: Jean Delvare <khali at linux-fr.org>
> Cc: Johannes Berg <johannes at sipsolutions.net>
> Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
> ---
> sound/aoa/codecs/onyx.c | 71 +++++++++++++++++++++++++++++------------------
> sound/aoa/codecs/tas.c | 63 +++++++++++++++++++++++++----------------
> 2 files changed, 84 insertions(+), 50 deletions(-)
Note to potential testers of this patch: you need to apply this i2c
patch first:
ftp://ftp.kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/i2c-loosen-driver-check.patch
>
> --- linux-2.6.30-rc1.orig/sound/aoa/codecs/onyx.c 2009-04-09 11:53:11.000000000 +0200
> +++ linux-2.6.30-rc1/sound/aoa/codecs/onyx.c 2009-04-09 13:58:44.000000000 +0200
> @@ -47,7 +47,7 @@ MODULE_DESCRIPTION("pcm3052 (onyx) codec
> struct onyx {
> /* cache registers 65 to 80, they are write-only! */
> u8 cache[16];
> - struct i2c_client i2c;
> + struct i2c_client *i2c;
> struct aoa_codec codec;
> u32 initialised:1,
> spdif_locked:1,
> @@ -72,7 +72,7 @@ static int onyx_read_register(struct ony
> *value = onyx->cache[reg-FIRSTREGISTER];
> return 0;
> }
> - v = i2c_smbus_read_byte_data(&onyx->i2c, reg);
> + v = i2c_smbus_read_byte_data(onyx->i2c, reg);
> if (v < 0)
> return -1;
> *value = (u8)v;
> @@ -84,7 +84,7 @@ static int onyx_write_register(struct on
> {
> int result;
>
> - result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value);
> + result = i2c_smbus_write_byte_data(onyx->i2c, reg, value);
> if (!result)
> onyx->cache[reg-FIRSTREGISTER] = value;
> return result;
> @@ -996,12 +996,38 @@ static void onyx_exit_codec(struct aoa_c
> onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
> }
>
> -static struct i2c_driver onyx_driver;
> -
> static int onyx_create(struct i2c_adapter *adapter,
> struct device_node *node,
> int addr)
> {
> + struct i2c_board_info info;
> + struct i2c_client *client;
> +
> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE);
> + if (node) {
> + info.addr = addr;
> + info.platform_data = node;
> + client = i2c_new_device(adapter, &info);
> + } else {
> + /* probe both possible addresses for the onyx chip */
> + unsigned short probe_onyx[] = {
> + 0x46, 0x47, I2C_CLIENT_END
> + };
> +
> + client = i2c_new_probed_device(adapter, &info, probe_onyx);
> + }
> + if (!client)
> + return -ENODEV;
> +
> + list_add_tail(&client->detected, &client->driver->clients);
> + return 0;
> +}
> +
> +static int onyx_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device_node *node = client->dev.platform_data;
> struct onyx *onyx;
> u8 dummy;
>
> @@ -1011,20 +1037,12 @@ static int onyx_create(struct i2c_adapte
> return -ENOMEM;
>
> mutex_init(&onyx->mutex);
> - onyx->i2c.driver = &onyx_driver;
> - onyx->i2c.adapter = adapter;
> - onyx->i2c.addr = addr & 0x7f;
> - strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE);
> -
> - if (i2c_attach_client(&onyx->i2c)) {
> - printk(KERN_ERR PFX "failed to attach to i2c\n");
> - goto fail;
> - }
> + onyx->i2c = client;
> + i2c_set_clientdata(client, onyx);
>
> /* we try to read from register ONYX_REG_CONTROL
> * to check if the codec is present */
> if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) {
> - i2c_detach_client(&onyx->i2c);
> printk(KERN_ERR PFX "failed to read control register\n");
> goto fail;
> }
> @@ -1036,7 +1054,6 @@ static int onyx_create(struct i2c_adapte
> onyx->codec.node = of_node_get(node);
>
> if (aoa_codec_register(&onyx->codec)) {
> - i2c_detach_client(&onyx->i2c);
> goto fail;
> }
> printk(KERN_DEBUG PFX "created and attached onyx instance\n");
> @@ -1074,19 +1091,13 @@ static int onyx_i2c_attach(struct i2c_ad
> return -ENODEV;
>
> printk(KERN_DEBUG PFX "found k2-i2c, checking if onyx chip is on it\n");
> - /* probe both possible addresses for the onyx chip */
> - if (onyx_create(adapter, NULL, 0x46) == 0)
> - return 0;
> - return onyx_create(adapter, NULL, 0x47);
> + return onyx_create(adapter, NULL, 0);
> }
>
> -static int onyx_i2c_detach(struct i2c_client *client)
> +static int onyx_i2c_remove(struct i2c_client *client)
> {
> - struct onyx *onyx = container_of(client, struct onyx, i2c);
> - int err;
> + struct onyx *onyx = i2c_get_clientdata(client);
>
> - if ((err = i2c_detach_client(client)))
> - return err;
> aoa_codec_unregister(&onyx->codec);
> of_node_put(onyx->codec.node);
> if (onyx->codec_info)
> @@ -1095,13 +1106,21 @@ static int onyx_i2c_detach(struct i2c_cl
> return 0;
> }
>
> +static const struct i2c_device_id onyx_i2c_id[] = {
> + { "aoa_codec_onyx", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, onyx_i2c_id);
> +
> static struct i2c_driver onyx_driver = {
> .driver = {
> .name = "aoa_codec_onyx",
> .owner = THIS_MODULE,
> },
> .attach_adapter = onyx_i2c_attach,
> - .detach_client = onyx_i2c_detach,
> + .probe = onyx_i2c_probe,
> + .remove = onyx_i2c_remove,
> + .id_table = onyx_i2c_id,
> };
>
> static int __init onyx_init(void)
> --- linux-2.6.30-rc1.orig/sound/aoa/codecs/tas.c 2009-04-09 11:53:11.000000000 +0200
> +++ linux-2.6.30-rc1/sound/aoa/codecs/tas.c 2009-04-09 13:58:41.000000000 +0200
> @@ -82,7 +82,7 @@ MODULE_DESCRIPTION("tas codec driver for
>
> struct tas {
> struct aoa_codec codec;
> - struct i2c_client i2c;
> + struct i2c_client *i2c;
> u32 mute_l:1, mute_r:1 ,
> controls_created:1 ,
> drc_enabled:1,
> @@ -108,9 +108,9 @@ static struct tas *codec_to_tas(struct a
> static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data)
> {
> if (len == 1)
> - return i2c_smbus_write_byte_data(&tas->i2c, reg, *data);
> + return i2c_smbus_write_byte_data(tas->i2c, reg, *data);
> else
> - return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data);
> + return i2c_smbus_write_i2c_block_data(tas->i2c, reg, len, data);
> }
>
> static void tas3004_set_drc(struct tas *tas)
> @@ -882,12 +882,30 @@ static void tas_exit_codec(struct aoa_co
> }
>
>
> -static struct i2c_driver tas_driver;
> -
> static int tas_create(struct i2c_adapter *adapter,
> struct device_node *node,
> int addr)
> {
> + struct i2c_board_info info;
> + struct i2c_client *client;
> +
> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE);
> + info.addr = addr;
> + info.platform_data = node;
> +
> + client = i2c_new_device(adapter, &info);
> + if (!client)
> + return -ENODEV;
> +
> + list_add_tail(&client->detected, &client->driver->clients);
> + return 0;
> +}
> +
> +static int tas_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device_node *node = client->dev.platform_data;
> struct tas *tas;
>
> tas = kzalloc(sizeof(struct tas), GFP_KERNEL);
> @@ -896,17 +914,11 @@ static int tas_create(struct i2c_adapter
> return -ENOMEM;
>
> mutex_init(&tas->mtx);
> - tas->i2c.driver = &tas_driver;
> - tas->i2c.adapter = adapter;
> - tas->i2c.addr = addr;
> + tas->i2c = client;
> + i2c_set_clientdata(client, tas);
> +
> /* seems that half is a saner default */
> tas->drc_range = TAS3004_DRC_MAX / 2;
> - strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE);
> -
> - if (i2c_attach_client(&tas->i2c)) {
> - printk(KERN_ERR PFX "failed to attach to i2c\n");
> - goto fail;
> - }
>
> strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN);
> tas->codec.owner = THIS_MODULE;
> @@ -915,14 +927,12 @@ static int tas_create(struct i2c_adapter
> tas->codec.node = of_node_get(node);
>
> if (aoa_codec_register(&tas->codec)) {
> - goto detach;
> + goto fail;
> }
> printk(KERN_DEBUG
> "snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n",
> - addr, node->full_name);
> + (unsigned int)client->addr, node->full_name);
> return 0;
> - detach:
> - i2c_detach_client(&tas->i2c);
> fail:
> mutex_destroy(&tas->mtx);
> kfree(tas);
> @@ -970,14 +980,11 @@ static int tas_i2c_attach(struct i2c_ada
> return -ENODEV;
> }
>
> -static int tas_i2c_detach(struct i2c_client *client)
> +static int tas_i2c_remove(struct i2c_client *client)
> {
> - struct tas *tas = container_of(client, struct tas, i2c);
> - int err;
> + struct tas *tas = i2c_get_clientdata(client);
> u8 tmp = TAS_ACR_ANALOG_PDOWN;
>
> - if ((err = i2c_detach_client(client)))
> - return err;
> aoa_codec_unregister(&tas->codec);
> of_node_put(tas->codec.node);
>
> @@ -989,13 +996,21 @@ static int tas_i2c_detach(struct i2c_cli
> return 0;
> }
>
> +static const struct i2c_device_id tas_i2c_id[] = {
> + { "aoa_codec_tas", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, tas_i2c_id);
> +
> static struct i2c_driver tas_driver = {
> .driver = {
> .name = "aoa_codec_tas",
> .owner = THIS_MODULE,
> },
> .attach_adapter = tas_i2c_attach,
> - .detach_client = tas_i2c_detach,
> + .probe = tas_i2c_probe,
> + .remove = tas_i2c_remove,
> + .id_table = tas_i2c_id,
> };
>
> static int __init tas_init(void)
>
>
--
Jean Delvare
More information about the Alsa-devel
mailing list