[alsa-devel] [PATCH] hda - enable SPDIF output for Intel DX58SO board
Takashi Iwai
tiwai at suse.de
Mon Apr 6 04:06:18 CEST 2009
At Thu, 2 Apr 2009 19:44:18 +0800,
Wu Fengguang wrote:
>
> ALC889 has two SPDIF outputs: 0x06, 0x10. Board vendors can use either or both.
> DX58SO uses 0x10, but the driver assumes 0x06. The safe solution is to add
> 0x10 as slave output to the existing 0x06.
>
> Reported-by: Jeroen Van Breedam <jeroen.vanbreedam at sgr5.be>
> Tested-by: Jeroen Van Breedam <jeroen.vanbreedam at sgr5.be>
> Signed-off-by: Wu Fengguang <fengguang.wu at intel.com>
Applied now. Thanks.
Takashi
> ---
> sound/pci/hda/patch_realtek.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> --- sound-2.6.orig/sound/pci/hda/patch_realtek.c
> +++ sound-2.6/sound/pci/hda/patch_realtek.c
> @@ -8764,6 +8764,10 @@ static struct snd_pci_quirk alc883_cfg_t
> {}
> };
>
> +static hda_nid_t alc883_slave_dig_outs[] = {
> + ALC1200_DIGOUT_NID, 0,
> +};
> +
> static hda_nid_t alc1200_slave_dig_outs[] = {
> ALC883_DIGOUT_NID, 0,
> };
> @@ -8809,6 +8813,7 @@ static struct alc_config_preset alc883_p
> .dac_nids = alc883_dac_nids,
> .dig_out_nid = ALC883_DIGOUT_NID,
> .dig_in_nid = ALC883_DIGIN_NID,
> + .slave_dig_outs = alc883_slave_dig_outs,
> .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_intel_modes),
> .channel_mode = alc883_3ST_6ch_intel_modes,
> .need_dac_fix = 1,
>
More information about the Alsa-devel
mailing list