[alsa-devel] [PATCH 3/5] [RFC] ALSA ASOC Adds DSP DAI format support for platform driver

[Jarkko Nikula]

On Tue, 30 Sep 2008 12:11:45 +0530
"ext Arun KS" <arunks at mistralsolutions.com> wrote:

> > I think this is not enough. The word clock length equals to one BCLK
> > cycle in DSP mode. Not n channel bit BCLK cycles like in I2S.
> >
> 
> In DSP Mode, Frame sync is followed by two data words.
> I tested this patch and its working. Am i missing something ?
> 
I meant length of FS/LRC[IN | OUT] signal itself. E.g. see figures 3-7
and 3-8 in AIC23 data manual:

http://www.ti.com/lit/gpn/tlv320aic23

Now omap-mcbsp.c sets this FS length to 16 BCLK periods in
omap_mcbsp_dai_hw_params. Currently code is pretty much tailored for
16-bit stereo I2S so probably some McBSP configuration bits are better
set in another function than currently :-)


Jarkko
--
To unsubscribe from this list: send the line "unsubscribe alsa-devel" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html