[alsa-devel] ALSA:ATMEL: common arch for audio via ssc(patch 3/3: adding directories)
Sedji Gaouaou
sedji.gaouaou at atmel.com
Fri Sep 26 11:24:10 CEST 2008
This last patch contains the board specific files.
I have not changed playpaq_wm8510.c, and I did few changes on eti_b1_wm8731.c.
Regards,
Sedji
diff --git a/sound/soc/atmel/eti_b1_wm8731.c b/sound/soc/atmel/eti_b1_wm8731.c
new file mode 100644
index 0000000..afa1aaf
--- /dev/null
+++ b/sound/soc/atmel/eti_b1_wm8731.c
@@ -0,0 +1,353 @@
+/*
+ * eti_b1_wm8731 -- SoC audio for AT91RM9200-based Endrelia ETI_B1 board.
+ *
+ * Author: Frank Mandarino <fmandarino at endrelia.com>
+ * Endrelia Technologies Inc.
+ * Created: Mar 29, 2006
+ *
+ * Based on corgi.c by:
+ *
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Authors: Liam Girdwood <liam.girdwood at wolfsonmicro.com>
+ * Richard Purdie <richard at openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+#include "../codecs/wm8731.h"
+#include "atmel_pcm.h"
+#include "atmel_ssc_dai.h"
+
+#if 0
+#define DBG(x...) printk(KERN_INFO "eti_b1_wm8731: " x)
+#else
+#define DBG(x...)
+#endif
+
+static struct clk *pck1_clk;
+static struct clk *pllb_clk;
+
+
+static int eti_b1_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* cpu clock is the AT91 master clock sent to the SSC */
+ ret = snd_soc_dai_set_sysclk(cpu_dai, ATMEL_SYSCLK_MCK,
+ 60000000, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ /* codec system clock is supplied by PCK1, set to 12MHz */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+ 12000000, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ /* Start PCK1 clock. */
+ clk_enable(pck1_clk);
+ DBG("pck1 started\n");
+
+ return 0;
+}
+
+static void eti_b1_shutdown(struct snd_pcm_substream *substream)
+{
+ /* Stop PCK1 clock. */
+ clk_disable(pck1_clk);
+ DBG("pck1 stopped\n");
+}
+
+static int eti_b1_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+#ifdef CONFIG_SND_AT91_SOC_ETI_SLAVE
+ unsigned int rate;
+ int cmr_div, period;
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The SSC clock dividers depend on the sample rate. The CMR.DIV
+ * field divides the system master clock MCK to drive the SSC TK
+ * signal which provides the codec BCLK. The TCMR.PERIOD and
+ * RCMR.PERIOD fields further divide the BCLK signal to drive
+ * the SSC TF and RF signals which provide the codec DACLRC and
+ * ADCLRC clocks.
+ *
+ * The dividers were determined through trial and error, where a
+ * CMR.DIV value is chosen such that the resulting BCLK value is
+ * divisible, or almost divisible, by (2 * sample rate), and then
+ * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1.
+ */
+ rate = params_rate(params);
+
+ switch (rate) {
+ case 8000:
+ cmr_div = 25; /* BCLK = 60MHz/(2*25) = 1.2MHz */
+ period = 74; /* LRC = BCLK/(2*(74+1)) = 8000Hz */
+ break;
+ case 32000:
+ cmr_div = 7; /* BCLK = 60MHz/(2*7) ~= 4.28571428MHz */
+ period = 66; /* LRC = BCLK/(2*(66+1)) = 31982.942Hz */
+ break;
+ case 48000:
+ cmr_div = 13; /* BCLK = 60MHz/(2*13) ~= 2.3076923MHz */
+ period = 23; /* LRC = BCLK/(2*(23+1)) = 48076.923Hz */
+ break;
+ default:
+ printk(KERN_WARNING "unsupported rate %d"
+ " on ETI-B1 board\n", rate);
+ return -EINVAL;
+ }
+
+ /* set the MCK divider for BCLK */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div);
+ if (ret < 0)
+ return ret;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* set the BCLK divider for DACLRC */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai,
+ ATMEL_SSC_TCMR_PERIOD, period);
+ } else {
+ /* set the BCLK divider for ADCLRC */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai,
+ ATMEL_SSC_RCMR_PERIOD, period);
+ }
+ if (ret < 0)
+ return ret;
+
+#else /* CONFIG_SND_AT91_SOC_ETI_SLAVE */
+ /*
+ * Codec in Master Mode.
+ */
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+#endif /* CONFIG_SND_AT91_SOC_ETI_SLAVE */
+
+ return 0;
+}
+
+static struct snd_soc_ops eti_b1_ops = {
+ .startup = eti_b1_startup,
+ .hw_params = eti_b1_hw_params,
+ .shutdown = eti_b1_shutdown,
+};
+
+
+static const struct snd_soc_dapm_widget eti_b1_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Int Mic", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+
+ /* speaker connected to LHPOUT */
+ {"Ext Spk", NULL, "LHPOUT"},
+
+ /* mic is connected to Mic Jack, with WM8731 Mic Bias */
+ {"MICIN", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Int Mic"},
+};
+
+/*
+ * Logic for a wm8731 as connected on a Endrelia ETI-B1 board.
+ */
+static int eti_b1_wm8731_init(struct snd_soc_codec *codec)
+{
+ DBG("eti_b1_wm8731_init() called\n");
+
+ /* Add specific widgets */
+ snd_soc_dapm_new_controls(codec, eti_b1_dapm_widgets,
+ ARRAY_SIZE(eti_b1_dapm_widgets));
+
+ /* Set up specific audio path interconnects */
+ snd_soc_dapm_add_route(codec, intercon, ARRAY_SIZE(intercon));
+
+ /* not connected */
+ snd_soc_dapm_disable_pin(codec, "RLINEIN");
+ snd_soc_dapm_disable_pin(codec, "LLINEIN");
+
+ /* always connected */
+ snd_soc_dapm_enable_pin(codec, "Int Mic");
+ snd_soc_dapm_enable_pin(codec, "Ext Spk");
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct snd_soc_dai_link eti_b1_dai = {
+ .name = "WM8731",
+ .stream_name = "WM8731 PCM",
+ .cpu_dai = &atmel_ssc_dai[1],
+ .codec_dai = &wm8731_dai,
+ .init = eti_b1_wm8731_init,
+ .ops = &eti_b1_ops,
+};
+
+static struct snd_soc_machine snd_soc_machine_eti_b1 = {
+ .name = "ETI_B1_WM8731",
+ .dai_link = &eti_b1_dai,
+ .num_links = 1,
+};
+
+static struct wm8731_setup_data eti_b1_wm8731_setup = {
+ .i2c_address = 0x1a,
+};
+
+static struct snd_soc_device eti_b1_snd_devdata = {
+ .machine = &snd_soc_machine_eti_b1,
+ .platform = &atmel_soc_platform,
+ .codec_dev = &soc_codec_dev_wm8731,
+ .codec_data = &eti_b1_wm8731_setup,
+};
+
+static struct platform_device *eti_b1_snd_device;
+
+static int __init eti_b1_init(void)
+{
+ int ret;
+ struct atmel_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
+ struct ssc_device *ssc = NULL;
+
+ /*
+ * Request SSC device
+ */
+ ssc = ssc_request(1);
+ if (IS_ERR(ssc)) {
+ ret = PTR_ERR(ssc);
+ ssc = NULL;
+ goto err_ssc;
+ }
+ ssc_p->ssc = ssc;
+
+ eti_b1_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!eti_b1_snd_device) {
+ DBG("platform device allocation failed\n");
+ ret = -ENOMEM;
+ goto fail_io_unmap;
+ }
+
+ platform_set_drvdata(eti_b1_snd_device, &eti_b1_snd_devdata);
+ eti_b1_snd_devdata.dev = &eti_b1_snd_device->dev;
+
+ ret = platform_device_add(eti_b1_snd_device);
+ if (ret) {
+ DBG("platform device add failed\n");
+ platform_device_put(eti_b1_snd_device);
+ goto fail_io_unmap;
+ }
+
+ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */
+/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */
+
+ /*
+ * Set PCK1 parent to PLLB and its rate to 12 Mhz.
+ */
+ pllb_clk = clk_get(NULL, "pllb");
+ pck1_clk = clk_get(NULL, "pck1");
+
+ clk_set_parent(pck1_clk, pllb_clk);
+ clk_set_rate(pck1_clk, 12000000);
+
+ DBG("MCLK rate %luHz\n", clk_get_rate(pck1_clk));
+
+ /* assign the GPIO pin to PCK1 */
+ at91_set_B_periph(AT91_PIN_PA24, 0);
+
+#ifdef CONFIG_SND_AT91_SOC_ETI_SLAVE
+ printk(KERN_INFO "eti_b1_wm8731: Codec in Slave Mode\n");
+#else
+ printk(KERN_INFO "eti_b1_wm8731: Codec in Master Mode\n");
+#endif
+ return ret;
+err_ssc:
+ return ret;
+fail_io_unmap:
+ iounmap(ssc->base);
+fail_release_mem:
+ release_mem_region(AT91RM9200_BASE_SSC1, SZ_16K);
+ return ret;
+}
+
+static void __exit eti_b1_exit(void)
+{
+ struct atmel_ssc_periph *ssc_p = eti_b1_dai.cpu_dai->private_data;
+ struct ssc_device *ssc;
+
+ clk_put(pck1_clk);
+ clk_put(pllb_clk);
+
+ if (ssc_p != NULL) {
+ ssc = ssc_p->ssc;
+ if (ssc != NULL)
+ ssc_free(ssc);
+ ssc_p->ssc = NULL;
+ }
+
+ platform_device_unregister(eti_b1_snd_device);
+}
+
+module_init(eti_b1_init);
+module_exit(eti_b1_exit);
+
+/* Module information */
+MODULE_AUTHOR("Frank Mandarino <fmandarino at endrelia.com>");
+MODULE_DESCRIPTION("ALSA SoC ETI-B1-WM8731");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c
new file mode 100644
index 0000000..3f32621
--- /dev/null
+++ b/sound/soc/atmel/playpaq_wm8510.c
@@ -0,0 +1,522 @@
+/* sound/soc/at32/playpaq_wm8510.c
+ * ASoC machine driver for PlayPaq using WM8510 codec
+ *
+ * Copyright (C) 2008 Long Range Systems
+ * Geoffrey Wossum <gwossum at acm.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c
+ *
+ * NOTE: If you don't have the AT32 enhanced portmux configured (which
+ * isn't currently in the mainline or Atmel patched kernel), you will
+ * need to set the MCLK pin (PA30) to peripheral A in your board initialization
+ * code. Something like:
+ * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+ *
+ */
+
+/* #define DEBUG */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/portmux.h>
+
+#include "../codecs/wm8510.h"
+#include "at32-pcm.h"
+#include "at32-ssc.h"
+
+
+/*-------------------------------------------------------------------------*\
+ * constants
+\*-------------------------------------------------------------------------*/
+#define MCLK_PIN GPIO_PIN_PA(30)
+#define MCLK_PERIPH GPIO_PERIPH_A
+
+
+/*-------------------------------------------------------------------------*\
+ * data types
+\*-------------------------------------------------------------------------*/
+/* SSC clocking data */
+struct ssc_clock_data {
+ /* CMR div */
+ unsigned int cmr_div;
+
+ /* Frame period (as needed by xCMR.PERIOD) */
+ unsigned int period;
+
+ /* The SSC clock rate these settings where calculated for */
+ unsigned long ssc_rate;
+};
+
+
+/*-------------------------------------------------------------------------*\
+ * module data
+\*-------------------------------------------------------------------------*/
+static struct clk *_gclk0;
+static struct clk *_pll0;
+
+#define CODEC_CLK (_gclk0)
+
+
+/*-------------------------------------------------------------------------*\
+ * Sound SOC operations
+\*-------------------------------------------------------------------------*/
+#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
+static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock(
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct at32_ssc_info *ssc_p = cpu_dai->private_data;
+ struct ssc_device *ssc = ssc_p->ssc;
+ struct ssc_clock_data cd;
+ unsigned int rate, width_bits, channels;
+ unsigned int bitrate, ssc_div;
+ unsigned actual_rate;
+
+
+ /*
+ * Figure out required bitrate
+ */
+ rate = params_rate(params);
+ channels = params_channels(params);
+ width_bits = snd_pcm_format_physical_width(params_format(params));
+ bitrate = rate * width_bits * channels;
+
+
+ /*
+ * Figure out required SSC divider and period for required bitrate
+ */
+ cd.ssc_rate = clk_get_rate(ssc->clk);
+ ssc_div = cd.ssc_rate / bitrate;
+ cd.cmr_div = ssc_div / 2;
+ if (ssc_div & 1) {
+ /* round cmr_div up */
+ cd.cmr_div++;
+ }
+ cd.period = width_bits - 1;
+
+
+ /*
+ * Find actual rate, compare to requested rate
+ */
+ actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1));
+ pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n",
+ rate, actual_rate);
+
+
+ return cd;
+}
+#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
+
+
+
+static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct at32_ssc_info *ssc_p = cpu_dai->private_data;
+ struct ssc_device *ssc = ssc_p->ssc;
+ unsigned int pll_out = 0, bclk = 0, mclk_div = 0;
+ int ret;
+
+
+ /* Due to difficulties with getting the correct clocks from the AT32's
+ * PLL0, we're going to let the CODEC be in charge of all the clocks
+ */
+#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
+ const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+#else
+ struct ssc_clock_data cd;
+ const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+#endif
+
+ if (ssc == NULL) {
+ pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n");
+ return -EINVAL;
+ }
+
+
+ /*
+ * Figure out PLL and BCLK dividers for WM8510
+ */
+ switch (params_rate(params)) {
+ case 48000:
+ pll_out = 12288000;
+ mclk_div = WM8510_MCLKDIV_1;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ case 44100:
+ pll_out = 11289600;
+ mclk_div = WM8510_MCLKDIV_1;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ case 22050:
+ pll_out = 11289600;
+ mclk_div = WM8510_MCLKDIV_2;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ case 16000:
+ pll_out = 12288000;
+ mclk_div = WM8510_MCLKDIV_3;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ case 11025:
+ pll_out = 11289600;
+ mclk_div = WM8510_MCLKDIV_4;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ case 8000:
+ pll_out = 12288000;
+ mclk_div = WM8510_MCLKDIV_6;
+ bclk = WM8510_BCLKDIV_8;
+ break;
+
+ default:
+ pr_warning("playpaq_wm8510: Unsupported sample rate %d\n",
+ params_rate(params));
+ return -EINVAL;
+ }
+
+
+ /*
+ * set CPU and CODEC DAI configuration
+ */
+ ret = snd_soc_dai_set_fmt(codec_dai, fmt);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: "
+ "Failed to set CODEC DAI format (%d)\n",
+ ret);
+ return ret;
+ }
+ ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: "
+ "Failed to set CPU DAI format (%d)\n",
+ ret);
+ return ret;
+ }
+
+
+ /*
+ * Set CPU clock configuration
+ */
+#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
+ cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai);
+ pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n",
+ cd.cmr_div, cd.period);
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n",
+ ret);
+ return ret;
+ }
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD,
+ cd.period);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: "
+ "Failed to set CPU transmit period (%d)\n",
+ ret);
+ return ret;
+ }
+#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
+
+
+ /*
+ * Set CODEC clock configuration
+ */
+ pr_debug("playpaq_wm8510: "
+ "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n",
+ clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div);
+
+
+#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk);
+ if (ret < 0) {
+ pr_warning
+ ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n",
+ ret);
+ return ret;
+ }
+#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
+
+
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ clk_get_rate(CODEC_CLK), pll_out);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n",
+ ret);
+ return ret;
+ }
+
+
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div);
+ if (ret < 0) {
+ pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n",
+ ret);
+ return ret;
+ }
+
+
+ return 0;
+}
+
+
+
+static struct snd_soc_ops playpaq_wm8510_ops = {
+ .hw_params = playpaq_wm8510_hw_params,
+};
+
+
+
+static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Int Mic", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+
+
+static const char *intercon[][3] = {
+ /* speaker connected to SPKOUT */
+ {"Ext Spk", NULL, "SPKOUTP"},
+ {"Ext Spk", NULL, "SPKOUTN"},
+
+ {"Mic Bias", NULL, "Int Mic"},
+ {"MICN", NULL, "Mic Bias"},
+ {"MICP", NULL, "Mic Bias"},
+
+ /* Terminator */
+ {NULL, NULL, NULL},
+};
+
+
+
+static int playpaq_wm8510_init(struct snd_soc_codec *codec)
+{
+ int i;
+
+ /*
+ * Add DAPM widgets
+ */
+ for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++)
+ snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]);
+
+
+
+ /*
+ * Setup audio path interconnects
+ */
+ for (i = 0; intercon[i][0] != NULL; i++) {
+ snd_soc_dapm_connect_input(codec,
+ intercon[i][0],
+ intercon[i][1], intercon[i][2]);
+ }
+
+
+ /* always connected pins */
+ snd_soc_dapm_enable_pin(codec, "Int Mic");
+ snd_soc_dapm_enable_pin(codec, "Ext Spk");
+ snd_soc_dapm_sync(codec);
+
+
+
+ /* Make CSB show PLL rate */
+ snd_soc_dai_set_clkdiv(codec->dai, WM8510_OPCLKDIV,
+ WM8510_OPCLKDIV_1 | 4);
+
+ return 0;
+}
+
+
+
+static struct snd_soc_dai_link playpaq_wm8510_dai = {
+ .name = "WM8510",
+ .stream_name = "WM8510 PCM",
+ .cpu_dai = &at32_ssc_dai[0],
+ .codec_dai = &wm8510_dai,
+ .init = playpaq_wm8510_init,
+ .ops = &playpaq_wm8510_ops,
+};
+
+
+
+static struct snd_soc_machine snd_soc_machine_playpaq = {
+ .name = "LRS_PlayPaq_WM8510",
+ .dai_link = &playpaq_wm8510_dai,
+ .num_links = 1,
+};
+
+
+
+static struct wm8510_setup_data playpaq_wm8510_setup = {
+ .i2c_address = 0x1a,
+};
+
+
+
+static struct snd_soc_device playpaq_wm8510_snd_devdata = {
+ .machine = &snd_soc_machine_playpaq,
+ .platform = &at32_soc_platform,
+ .codec_dev = &soc_codec_dev_wm8510,
+ .codec_data = &playpaq_wm8510_setup,
+};
+
+static struct platform_device *playpaq_snd_device;
+
+
+static int __init playpaq_asoc_init(void)
+{
+ int ret = 0;
+ struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data;
+ struct ssc_device *ssc = NULL;
+
+
+ /*
+ * Request SSC device
+ */
+ ssc = ssc_request(0);
+ if (IS_ERR(ssc)) {
+ ret = PTR_ERR(ssc);
+ ssc = NULL;
+ goto err_ssc;
+ }
+ ssc_p->ssc = ssc;
+
+
+ /*
+ * Configure MCLK for WM8510
+ */
+ _gclk0 = clk_get(NULL, "gclk0");
+ if (IS_ERR(_gclk0)) {
+ _gclk0 = NULL;
+ goto err_gclk0;
+ }
+ _pll0 = clk_get(NULL, "pll0");
+ if (IS_ERR(_pll0)) {
+ _pll0 = NULL;
+ goto err_pll0;
+ }
+ if (clk_set_parent(_gclk0, _pll0)) {
+ pr_warning("snd-soc-playpaq: "
+ "Failed to set PLL0 as parent for DAC clock\n");
+ goto err_set_clk;
+ }
+ clk_set_rate(CODEC_CLK, 12000000);
+ clk_enable(CODEC_CLK);
+
+#if defined CONFIG_AT32_ENHANCED_PORTMUX
+ at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0);
+#endif
+
+
+ /*
+ * Create and register platform device
+ */
+ playpaq_snd_device = platform_device_alloc("soc-audio", 0);
+ if (playpaq_snd_device == NULL) {
+ ret = -ENOMEM;
+ goto err_device_alloc;
+ }
+
+ platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata);
+ playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev;
+
+ ret = platform_device_add(playpaq_snd_device);
+ if (ret) {
+ pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n",
+ ret);
+ goto err_device_add;
+ }
+
+ return 0;
+
+
+err_device_add:
+ if (playpaq_snd_device != NULL) {
+ platform_device_put(playpaq_snd_device);
+ playpaq_snd_device = NULL;
+ }
+err_device_alloc:
+err_set_clk:
+ if (_pll0 != NULL) {
+ clk_put(_pll0);
+ _pll0 = NULL;
+ }
+err_pll0:
+ if (_gclk0 != NULL) {
+ clk_put(_gclk0);
+ _gclk0 = NULL;
+ }
+err_gclk0:
+ if (ssc != NULL) {
+ ssc_free(ssc);
+ ssc = NULL;
+ }
+err_ssc:
+ return ret;
+}
+
+
+static void __exit playpaq_asoc_exit(void)
+{
+ struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data;
+ struct ssc_device *ssc;
+
+ if (ssc_p != NULL) {
+ ssc = ssc_p->ssc;
+ if (ssc != NULL)
+ ssc_free(ssc);
+ ssc_p->ssc = NULL;
+ }
+
+ if (_gclk0 != NULL) {
+ clk_put(_gclk0);
+ _gclk0 = NULL;
+ }
+ if (_pll0 != NULL) {
+ clk_put(_pll0);
+ _pll0 = NULL;
+ }
+
+#if defined CONFIG_AT32_ENHANCED_PORTMUX
+ at32_free_pin(MCLK_PIN);
+#endif
+
+ platform_device_unregister(playpaq_snd_device);
+ playpaq_snd_device = NULL;
+}
+
+module_init(playpaq_asoc_init);
+module_exit(playpaq_asoc_exit);
+
+MODULE_AUTHOR("Geoffrey Wossum <gwossum at acm.org>");
+MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
new file mode 100644
index 0000000..6b1aa3a
--- /dev/null
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -0,0 +1,328 @@
+/*
+ * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based
+ * ATMEL AT91SAM9G20ek board.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou at atmel.com>
+ *
+ * Based on ati_b1_wm8731.c by:
+ * Frank Mandarino <fmandarino at endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ * Based on corgi.c by:
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/atmel-ssc.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+#include "../codecs/wm8731.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+
+static int at91sam9g20ek_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ int ret;
+
+ /* codec system clock is supplied by PCK0, set to 12MHz */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+ 12000000, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+
+ dev_dbg(rtd->socdev->dev, "shutdown");
+}
+
+static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct atmel_ssc_info *ssc_p = cpu_dai->private_data;
+ struct ssc_device *ssc = ssc_p->ssc;
+ int ret;
+
+ unsigned int rate;
+ int cmr_div, period;
+
+ if (ssc == NULL) {
+ printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n");
+ return -EINVAL;
+ }
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The SSC clock dividers depend on the sample rate. The CMR.DIV
+ * field divides the system master clock MCK to drive the SSC TK
+ * signal which provides the codec BCLK. The TCMR.PERIOD and
+ * RCMR.PERIOD fields further divide the BCLK signal to drive
+ * the SSC TF and RF signals which provide the codec DACLRC and
+ * ADCLRC clocks.
+ *
+ * The dividers were determined through trial and error, where a
+ * CMR.DIV value is chosen such that the resulting BCLK value is
+ * divisible, or almost divisible, by (2 * sample rate), and then
+ * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1.
+ */
+ rate = params_rate(params);
+
+ switch (rate) {
+ case 8000:
+ cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */
+ period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */
+ break;
+ case 11025:
+ cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */
+ period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */
+ break;
+ case 16000:
+ cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */
+ period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */
+ break;
+ case 22050:
+ cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */
+ period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */
+ break;
+ case 32000:
+ cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */
+ period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */
+ break;
+ case 44100:
+ cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
+ period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */
+ break;
+ case 48000:
+ cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */
+ period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */
+ break;
+ case 88200:
+ cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
+ period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */
+ break;
+ case 96000:
+ cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */
+ period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */
+ break;
+ default:
+ printk(KERN_WARNING "unsupported rate %d"
+ " on at91sam9g20ek board\n", rate);
+ return -EINVAL;
+ }
+
+ /* set the MCK divider for BCLK */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div);
+ if (ret < 0)
+ return ret;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* set the BCLK divider for DACLRC */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai,
+ ATMEL_SSC_TCMR_PERIOD, period);
+ } else {
+ /* set the BCLK divider for ADCLRC */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai,
+ ATMEL_SSC_RCMR_PERIOD, period);
+ }
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops at91sam9g20ek_ops = {
+ .startup = at91sam9g20ek_startup,
+ .hw_params = at91sam9g20ek_hw_params,
+ .shutdown = at91sam9g20ek_shutdown,
+};
+
+
+static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Int Mic", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+
+ /* speaker connected to LHPOUT */
+ {"Ext Spk", NULL, "LHPOUT"},
+
+ /* mic is connected to Mic Jack, with WM8731 Mic Bias */
+ {"MICIN", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Int Mic"},
+};
+
+/*
+ * Logic for a wm8731 as connected on a at91sam9g20ek board.
+ */
+static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec)
+{
+ printk(KERN_DEBUG
+ "at91sam9g20ek_wm8731 "
+ ": at91sam9g20ek_wm8731_init() called\n");
+
+ /* Add specific widgets */
+ snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets,
+ ARRAY_SIZE(at91sam9g20ek_dapm_widgets));
+ /* Set up specific audio path interconnects */
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ /* not connected */
+ snd_soc_dapm_disable_pin(codec, "RLINEIN");
+ snd_soc_dapm_disable_pin(codec, "LLINEIN");
+
+ /* always connected */
+ snd_soc_dapm_enable_pin(codec, "Int Mic");
+ snd_soc_dapm_enable_pin(codec, "Ext Spk");
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct snd_soc_dai_link at91sam9g20ek_dai = {
+ .name = "WM8731",
+ .stream_name = "WM8731 PCM",
+ .cpu_dai = &atmel_ssc_dai[0],
+ .codec_dai = &wm8731_dai,
+ .init = at91sam9g20ek_wm8731_init,
+ .ops = &at91sam9g20ek_ops,
+};
+
+static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = {
+ .name = "WM8731",
+ .dai_link = &at91sam9g20ek_dai,
+ .num_links = 1,
+};
+
+static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = {
+ .i2c_address = 0x1b,
+};
+
+static struct snd_soc_device at91sam9g20ek_snd_devdata = {
+ .machine = &snd_soc_machine_at91sam9g20ek,
+ .platform = &atmel_soc_platform,
+ .codec_dev = &soc_codec_dev_wm8731,
+ .codec_data = &at91sam9g20ek_wm8731_setup,
+};
+
+static struct platform_device *at91sam9g20ek_snd_device;
+
+static int __init at91sam9g20ek_init(void)
+{
+ struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data;
+ struct ssc_device *ssc = NULL;
+ int ret;
+
+ /*
+ * Request SSC device
+ */
+ ssc = ssc_request(0);
+ if (IS_ERR(ssc)) {
+ ret = PTR_ERR(ssc);
+ ssc = NULL;
+ goto err_ssc;
+ }
+ ssc_p->ssc = ssc;
+
+ at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!at91sam9g20ek_snd_device) {
+ printk(KERN_DEBUG
+ "platform device allocation failed\n");
+ ret = -ENOMEM;
+ }
+
+ platform_set_drvdata(at91sam9g20ek_snd_device,
+ &at91sam9g20ek_snd_devdata);
+ at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev;
+
+ ret = platform_device_add(at91sam9g20ek_snd_device);
+ if (ret) {
+ printk(KERN_DEBUG
+ "platform device allocation failed\n");
+ platform_device_put(at91sam9g20ek_snd_device);
+ }
+
+ return ret;
+
+err_ssc:
+ return ret;
+}
+
+static void __exit at91sam9g20ek_exit(void)
+{
+ struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data;
+ struct ssc_device *ssc;
+
+ if (ssc_p != NULL) {
+ ssc = ssc_p->ssc;
+ if (ssc != NULL)
+ ssc_free(ssc);
+ ssc_p->ssc = NULL;
+ }
+
+ platform_device_unregister(at91sam9g20ek_snd_device);
+ at91sam9g20ek_snd_device = NULL;
+}
+
+module_init(at91sam9g20ek_init);
+module_exit(at91sam9g20ek_exit);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou at atmel.com>");
+MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731");
+MODULE_LICENSE("GPL");
More information about the Alsa-devel
mailing list