[alsa-devel] ALSA:AT91SAM9G20: Add support(DAI) for wolfson8731
Sedji Gaouaou
sedji.gaouaou at atmel.com
Wed Sep 17 11:51:09 CEST 2008
Hi,
So here is a patch to add support for the wolfson 8731 on the at91sam9g20 evaluation board.
Any comments will be welcomed!!
Regards,
Sedji
sound/soc/at91/Kconfig | 19 +-
sound/soc/at91/Makefile | 6 +
sound/soc/at91/at91-ssc.h | 1 +
sound/soc/at91/atmel_ssc_dai.c | 715 ++++++++++++++++++++++++++++++++++
sound/soc/at91/sam9g20_wm8731.c | 290 ++++++++++++++
sound/soc/codecs/Kconfig | 2 +-
6 files changed, 1031 insertions(+), 2 deletions(-)
diff --git a/sound/soc/at91/Kconfig b/sound/soc/at91/Kconfig
index 9051865..86621b9 100644
--- a/sound/soc/at91/Kconfig
+++ b/sound/soc/at91/Kconfig
@@ -7,7 +7,15 @@ config SND_AT91_SOC
to select the audio interfaces to support below.
config SND_AT91_SOC_SSC
- tristate
+ tristate "at91 soc ssc"
+
+config SND_ATMEL_SOC_SSC
+ tristate "ATMEL SoC ssc dai"
+ depends on ATMEL_SSC
+ help
+ Say Y or M if you want to add support for codecs the
+ ATMEL SSC interface(interface between at91sam9g20 and
+ WM8731 for instance).
config SND_AT91_SOC_ETI_B1_WM8731
tristate "SoC Audio support for WM8731-based Endrelia ETI-B1 boards"
@@ -18,6 +26,15 @@ config SND_AT91_SOC_ETI_B1_WM8731
Say Y if you want to add support for SoC audio on WM8731-based
Endrelia Technologies Inc ETI-B1 or ETI-C1 boards.
+config SND_AT91_SOC_SAM9G20_WM8731
+ tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
+ depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_AT91_SOC
+ select SND_ATMEL_SOC_SSC
+ select SND_SOC_WM8731
+ help
+ Say Y if you want to add support for SoC audio on WM8731-based
+ AT91sam9g20 evaluation board.
+
config SND_AT91_SOC_ETI_SLAVE
bool "Run codec in slave Mode on Endrelia boards"
depends on SND_AT91_SOC_ETI_B1_WM8731
diff --git a/sound/soc/at91/Makefile b/sound/soc/at91/Makefile
index f23da17..f12a798 100644
--- a/sound/soc/at91/Makefile
+++ b/sound/soc/at91/Makefile
@@ -1,11 +1,17 @@
# AT91 Platform Support
snd-soc-at91-objs := at91-pcm.o
snd-soc-at91-ssc-objs := at91-ssc.o
+snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o
+
obj-$(CONFIG_SND_AT91_SOC) += snd-soc-at91.o
obj-$(CONFIG_SND_AT91_SOC_SSC) += snd-soc-at91-ssc.o
+obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
+
# AT91 Machine Support
snd-soc-eti-b1-wm8731-objs := eti_b1_wm8731.o
+snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
obj-$(CONFIG_SND_AT91_SOC_ETI_B1_WM8731) += snd-soc-eti-b1-wm8731.o
+obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
diff --git a/sound/soc/at91/at91-ssc.h b/sound/soc/at91/at91-ssc.h
index 6b7bf38..b967691 100644
--- a/sound/soc/at91/at91-ssc.h
+++ b/sound/soc/at91/at91-ssc.h
@@ -22,6 +22,7 @@
#define AT91SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */
extern struct snd_soc_dai at91_ssc_dai[];
+extern struct snd_soc_dai atmel_ssc_dai[];
#endif /* _AT91_SSC_H */
diff --git a/sound/soc/at91/atmel_ssc_dai.c b/sound/soc/at91/atmel_ssc_dai.c
new file mode 100644
index 0000000..a3888c0
--- /dev/null
+++ b/sound/soc/at91/atmel_ssc_dai.c
@@ -0,0 +1,715 @@
+/*
+ * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou at atmel.com>
+ * ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino at endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <liam.girdwood at wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+
+#include "at91-pcm.h"
+#include "at91-ssc.h"
+
+#if 0
+#define DBG(x...) printk(KERN_DEBUG "atmel_ssc_dai:" x)
+#else
+#define DBG(x...)
+#endif
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+#define NUM_SSC_DEVICES 1
+#else
+#define NUM_SSC_DEVICES 3
+#endif
+
+/*
+ * SSC PDC registers required by the PCM DMA engine.
+ */
+static struct at91_pdc_regs pdc_tx_reg = {
+ .xpr = ATMEL_PDC_TPR,
+ .xcr = ATMEL_PDC_TCR,
+ .xnpr = ATMEL_PDC_TNPR,
+ .xncr = ATMEL_PDC_TNCR,
+};
+
+static struct at91_pdc_regs pdc_rx_reg = {
+ .xpr = ATMEL_PDC_RPR,
+ .xcr = ATMEL_PDC_RCR,
+ .xnpr = ATMEL_PDC_RNPR,
+ .xncr = ATMEL_PDC_RNCR,
+};
+
+/*
+ * SSC & PDC status bits for transmit and receive.
+ */
+static struct at91_ssc_mask ssc_tx_mask = {
+ .ssc_enable = SSC_BIT(CR_TXEN),
+ .ssc_disable = SSC_BIT(CR_TXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDTX),
+ .ssc_endbuf = SSC_BIT(SR_TXBUFE),
+ .pdc_enable = ATMEL_PDC_TXTEN,
+ .pdc_disable = ATMEL_PDC_TXTDIS,
+};
+
+static struct at91_ssc_mask ssc_rx_mask = {
+ .ssc_enable = SSC_BIT(CR_RXEN),
+ .ssc_disable = SSC_BIT(CR_RXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDRX),
+ .ssc_endbuf = SSC_BIT(SR_RXBUFF),
+ .pdc_enable = ATMEL_PDC_RXTEN,
+ .pdc_disable = ATMEL_PDC_RXTDIS,
+};
+
+
+/*
+ * DMA parameters.
+ */
+static struct at91_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
+ {{
+ .name = "SSC0 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC0 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+#if NUM_SSC_DEVICES == 3
+ {{
+ .name = "SSC1 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC1 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+ {{
+ .name = "SSC2 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC2 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+#endif
+};
+
+static struct atmel_ssc_info {
+ char *name;
+ struct ssc_device *ssc;
+ spinlock_t lock; /* lock for dir_mask */
+ unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */
+ unsigned short initialized; /* 1=SSC has been initialized */
+ unsigned short daifmt;
+ unsigned short cmr_div;
+ unsigned short tcmr_period;
+ unsigned short rcmr_period;
+ struct at91_pcm_dma_params *dma_params[2];
+} ssc_info[NUM_SSC_DEVICES] = {
+ {
+ .name = "ssc0",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
+ .dir_mask = 0,
+ .initialized = 0,
+ },
+#if NUM_SSC_DEVICES == 3
+ {
+ .name = "ssc1",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
+ .dir_mask = 0,
+ .initialized = 0,
+ },
+ {
+ .name = "ssc2",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
+ .dir_mask = 0,
+ .initialized = 0,
+ },
+#endif
+};
+
+
+/*
+ * SSC interrupt handler. Passes PDC interrupts to the DMA
+ * interrupt handler in the PCM driver.
+ */
+static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id)
+{
+ struct atmel_ssc_info *ssc_p = dev_id;
+ struct at91_pcm_dma_params *dma_params;
+ u32 ssc_sr;
+ int i;
+
+ ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR)
+ & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR);
+
+ /*
+ * Loop through the substreams attached to this SSC. If
+ * a DMA-related interrupt occurred on that substream, call
+ * the DMA interrupt handler function, if one has been
+ * registered in the dma_params structure by the PCM driver.
+ */
+ for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
+ dma_params = ssc_p->dma_params[i];
+
+ if (dma_params != NULL && dma_params->dma_intr_handler != NULL &&
+ (ssc_sr &
+ (dma_params->mask->ssc_endx | dma_params->mask->ssc_endbuf)))
+
+ dma_params->dma_intr_handler(ssc_sr, dma_params->substream);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Startup. Only that one substream allowed in each direction.
+ */
+static int atmel_ssc_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ int dir_mask;
+
+ DBG("ssc_startup: SSC_SR=0x%08lx\n", ssc_readl(ssc_p->ssc->regs, SR));
+ dir_mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0x1 : 0x2;
+
+ spin_lock_irq(&ssc_p->lock);
+ if (ssc_p->dir_mask & dir_mask) {
+ spin_unlock_irq(&ssc_p->lock);
+ return -EBUSY;
+ }
+ ssc_p->dir_mask |= dir_mask;
+ spin_unlock_irq(&ssc_p->lock);
+
+ return 0;
+}
+
+/*
+ * Shutdown. Clear DMA parameters and shutdown the SSC if there
+ * are no other substreams open.
+ */
+static void atmel_ssc_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ struct at91_pcm_dma_params *dma_params;
+ int dir, dir_mask;
+ u32 pid;
+
+ pid = ssc_p->ssc->pdev->resource[1].start;
+
+ dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
+ dma_params = ssc_p->dma_params[dir];
+
+ if (dma_params != NULL) {
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+ DBG("%s disabled SSC_SR=0x%08lx\n", (dir ? "receive" : "transmit"),
+ ssc_readl(ssc_p->ssc->regs, SR));
+
+ dma_params->ssc_base = NULL;
+ dma_params->substream = NULL;
+ ssc_p->dma_params[dir] = NULL;
+ }
+
+ dir_mask = 1 << dir;
+
+ spin_lock_irq(&ssc_p->lock);
+ ssc_p->dir_mask &= ~dir_mask;
+ if (!ssc_p->dir_mask) {
+ /* Shutdown the SSC clock. */
+ DBG("Stopping pid %d clock\n", pid);
+ at91_sys_write(AT91_PMC_PCDR, 1<<pid);
+
+ if (ssc_p->initialized) {
+ free_irq(pid, ssc_p);
+ ssc_p->initialized = 0;
+ }
+
+ /* Reset the SSC */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+ /* Clear the SSC dividers */
+ ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
+ }
+ spin_unlock_irq(&ssc_p->lock);
+ ssc_free(ssc_p->ssc);
+}
+
+/*
+ * Record the DAI format for use in hw_params().
+ */
+static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ ssc_p->daifmt = fmt;
+ return 0;
+}
+
+/*
+ * Record SSC clock dividers for use in hw_params().
+ */
+static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ switch (div_id) {
+ case AT91SSC_CMR_DIV:
+ /*
+ * The same master clock divider is used for both
+ * transmit and receive, so if a value has already
+ * been set, it must match this value.
+ */
+ if (ssc_p->cmr_div == 0)
+ ssc_p->cmr_div = div;
+ else
+ if (div != ssc_p->cmr_div)
+ return -EBUSY;
+ break;
+
+ case AT91SSC_TCMR_PERIOD:
+ ssc_p->tcmr_period = div;
+ break;
+
+ case AT91SSC_RCMR_PERIOD:
+ ssc_p->rcmr_period = div;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Configure the SSC.
+ */
+static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ int id = rtd->dai->cpu_dai->id;
+ struct atmel_ssc_info *ssc_p = &ssc_info[id];
+ struct at91_pcm_dma_params *dma_params;
+ int dir, channels, bits;
+ u32 tfmr, rfmr, tcmr, rcmr;
+ u32 pid;
+ int start_event;
+ int ret;
+
+ ssc_p->ssc = ssc_request(0);
+ pid = ssc_p->ssc->pdev->resource[1].start;
+ /*
+ * Currently, there is only one set of dma params for
+ * each direction. If more are added, this code will
+ * have to be changed to select the proper set.
+ */
+ dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
+ dma_params = &ssc_dma_params[id][dir];
+ dma_params->ssc_base = ssc_p->ssc->regs;
+ dma_params->substream = substream;
+
+ ssc_p->dma_params[dir] = dma_params;
+
+ /*
+ * The cpu_dai->dma_data field is only used to communicate the
+ * appropriate DMA parameters to the pcm driver hw_params()
+ * function. It should not be used for other purposes
+ * as it is common to all substreams.
+ */
+ rtd->dai->cpu_dai->dma_data = dma_params;
+
+ channels = params_channels(params);
+
+ /*
+ * Determine sample size in bits and the PDC increment.
+ */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ bits = 8;
+ dma_params->pdc_xfer_size = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ bits = 16;
+ dma_params->pdc_xfer_size = 2;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ bits = 24;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bits = 32;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
+ return -EINVAL;
+ }
+
+ /*
+ * The SSC only supports up to 16-bit samples in I2S format, due
+ * to the size of the Frame Mode Register FSLEN field.
+ */
+ if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S
+ && bits > 16) {
+ printk(KERN_WARNING
+ "atmel_ssc_dai: sample size %d is too large for I2S\n", bits);
+ return -EINVAL;
+ }
+
+ /*
+ * Compute SSC register settings.
+ */
+ switch (ssc_p->daifmt
+ & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * I2S format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated from the
+ * MCK divider, and the BCLK signal is output on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, 1)
+ | SSC_BF(RCMR_START, 4)
+ | SSC_BF(RCMR_CKI, 1)
+ | SSC_BF(RCMR_CKO, 0)
+ | SSC_BF(RCMR_CKS, 0);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, 0)
+ | SSC_BF(RFMR_FSOS, 1)
+ | SSC_BF(RFMR_FSLEN, (bits - 1))
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BF(RFMR_MSBF, 1)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, 1)
+ | SSC_BF(TCMR_START, 4)
+ | SSC_BF(TCMR_CKI, 0)
+ | SSC_BF(TCMR_CKO, 1)
+ | SSC_BF(TCMR_CKS, 0);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, 0)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, 1)
+ | SSC_BF(TFMR_FSLEN, (bits - 1))
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BF(TFMR_MSBF, 1)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
+ /*
+ * I2S format, CODEC supplies BCLK and LRC clocks.
+ *
+ * The SSC transmit clock is obtained from the BCLK signal on
+ * on the TK line, and the SSC receive clock is generated from the
+ * transmit clock.
+ *
+ * For single channel data, one sample is transferred on the falling
+ * edge of the LRC clock. For two channel data, one sample is
+ * transferred on both edges of the LRC clock.
+ */
+ start_event = channels == 1
+ ? 4
+ : 7;
+
+ rcmr = SSC_BF(RCMR_PERIOD, 0)
+ | SSC_BF(RCMR_STTDLY, 1)
+ | SSC_BF(RCMR_START, start_event)
+ | SSC_BF(RCMR_CKI, 1)
+ | SSC_BF(RCMR_CKO, 0)
+ | SSC_BF(RCMR_CKS, 1);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, 0)
+ | SSC_BF(RFMR_FSOS, 0)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, 0)
+ | SSC_BF(RFMR_MSBF, 1)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, 0)
+ | SSC_BF(TCMR_STTDLY, 1)
+ | SSC_BF(TCMR_START, start_event)
+ | SSC_BF(TCMR_CKI, 0)
+ | SSC_BF(TCMR_CKO, 0)
+ | SSC_BF(TCMR_CKS, 2);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, 0)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, 0)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, 0)
+ | SSC_BF(TFMR_MSBF, 1)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated from the
+ * MCK divider, and the BCLK signal is output on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, 1)
+ | SSC_BF(RCMR_START, 5)
+ | SSC_BF(RCMR_CKI, 1)
+ | SSC_BF(RCMR_CKO, 0)
+ | SSC_BF(RCMR_CKS, 0);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, 0)
+ | SSC_BF(RFMR_FSOS, 2)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BF(RFMR_MSBF, 1)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, 1)
+ | SSC_BF(TCMR_START, 5)
+ | SSC_BF(TCMR_CKI, 1)
+ | SSC_BF(TCMR_CKO, 1)
+ | SSC_BF(TCMR_CKS, 0);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, 0)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, 2)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BF(TFMR_MSBF, 1)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x.\n",
+ ssc_p->daifmt);
+ return -EINVAL;
+ break;
+ }
+ DBG("RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", rcmr, rfmr, tcmr, tfmr);
+
+ if (!ssc_p->initialized) {
+
+ /* Enable PMC peripheral clock for this SSC */
+ DBG("Starting pid %d clock\n", pid);
+ at91_sys_write(AT91_PMC_PCER, 1<<pid);
+
+ /* Reset the SSC and its PDC registers */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
+ ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+
+ ret = request_irq(pid, atmel_ssc_interrupt,
+ 0, ssc_p->name, ssc_p);
+ if (ret < 0) {
+ printk(KERN_WARNING "atmel_ssc_dai: request_irq failure\n");
+
+ DBG("Stopping pid %d clock\n", pid);
+ at91_sys_write(AT91_PMC_PCER, 1<<pid);
+ return ret;
+ }
+
+ ssc_p->initialized = 1;
+ }
+
+ /* set SSC clock mode register */
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
+
+ /* set receive clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
+
+ /* set transmit clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
+ ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
+
+ DBG("hw_params: SSC initialized\n");
+ return 0;
+}
+
+
+static int atmel_ssc_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ struct at91_pcm_dma_params *dma_params;
+ int dir;
+
+ dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
+ dma_params = ssc_p->dma_params[dir];
+
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
+
+ DBG("%s enabled SSC_SR=0x%08lx\n", dir ? "receive" : "transmit",
+ ssc_readl(ssc_p->ssc->regs, SR));
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+#define atmel_ssc_suspend NULL
+#define atmel_ssc_resume NULL
+#else
+#define atmel_ssc_suspend NULL
+#define atmel_ssc_resume NULL
+#endif
+
+
+#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
+ SNDRV_PCM_RATE_96000)
+
+#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = {
+ { .name = "atmel-ssc0",
+ .id = 0,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,},
+ .dai_ops = {
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[0].ssc,
+ },
+#if NUM_SSC_DEVICES == 3
+ { .name = "atmel-ssc1",
+ .id = 1,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,},
+ .dai_ops = {
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[1].ssc,
+ },
+ { .name = "atmel-ssc2",
+ .id = 2,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,},
+ .dai_ops = {
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[2].ssc,
+ },
+#endif
+};
+
+EXPORT_SYMBOL_GPL(atmel_ssc_dai);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou at atmel.com, www.atmel.com");
+MODULE_DESCRIPTION("ATMEL SSC ASoC Interface");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/at91/sam9g20_wm8731.c b/sound/soc/at91/sam9g20_wm8731.c
new file mode 100644
index 0000000..8d77830
--- /dev/null
+++ b/sound/soc/at91/sam9g20_wm8731.c
@@ -0,0 +1,290 @@
+/*
+ * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based ATMEL AT91SAM9G20ek board.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou at atmel.com>
+ *
+ * Based on ati_b1_wm8731.c by:
+ * Frank Mandarino <fmandarino at endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ * Based on corgi.c by:
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+#include "../codecs/wm8731.h"
+#include "at91-pcm.h"
+#include "at91-ssc.h"
+
+
+#if 0
+#define DBG(x...) printk(KERN_INFO "at91sam9g20ek_wm8731: " x)
+#else
+#define DBG(x...)
+#endif
+
+
+static int at91sam9g20ek_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ int ret;
+
+ /* codec system clock is supplied by PCK0, set to 12MHz */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+ 12000000, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream)
+{
+ DBG("pck0 stopped\n");
+}
+
+static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ unsigned int rate;
+ int cmr_div, period;
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The SSC clock dividers depend on the sample rate. The CMR.DIV
+ * field divides the system master clock MCK to drive the SSC TK
+ * signal which provides the codec BCLK. The TCMR.PERIOD and
+ * RCMR.PERIOD fields further divide the BCLK signal to drive
+ * the SSC TF and RF signals which provide the codec DACLRC and
+ * ADCLRC clocks.
+ *
+ * The dividers were determined through trial and error, where a
+ * CMR.DIV value is chosen such that the resulting BCLK value is
+ * divisible, or almost divisible, by (2 * sample rate), and then
+ * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1.
+ */
+ rate = params_rate(params);
+
+ switch (rate) {
+ case 8000:
+ cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */
+ period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */
+ break;
+ case 11025:
+ cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */
+ period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */
+ break;
+ case 16000:
+ cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */
+ period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */
+ break;
+ case 22050:
+ cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */
+ period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */
+ break;
+ case 32000:
+ cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */
+ period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */
+ break;
+ case 44100:
+ cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
+ period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */
+ break;
+ case 48000:
+ cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */
+ period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */
+ break;
+ case 88200:
+ cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
+ period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */
+ break;
+ case 96000:
+ cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */
+ period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */
+ break;
+ default:
+ printk(KERN_WARNING "unsupported rate %d on at91sam9g20ek board\n", rate);
+ return -EINVAL;
+ }
+
+ /* set the MCK divider for BCLK */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, AT91SSC_CMR_DIV, cmr_div);
+ if (ret < 0)
+ return ret;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* set the BCLK divider for DACLRC */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai,
+ AT91SSC_TCMR_PERIOD, period);
+ } else {
+ /* set the BCLK divider for ADCLRC */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai,
+ AT91SSC_RCMR_PERIOD, period);
+ }
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops at91sam9g20ek_ops = {
+ .startup = at91sam9g20ek_startup,
+ .hw_params = at91sam9g20ek_hw_params,
+ .shutdown = at91sam9g20ek_shutdown,
+};
+
+
+static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Int Mic", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+
+ /* speaker connected to LHPOUT */
+ {"Ext Spk", NULL, "LHPOUT"},
+
+ /* mic is connected to Mic Jack, with WM8731 Mic Bias */
+ {"MICIN", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Int Mic"},
+};
+
+/*
+ * Logic for a wm8731 as connected on a at91sam9g20ek board.
+ */
+static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec)
+{
+
+ DBG("at91sam9g20ek_wm8731 : at91sam9g20ek_wm8731_init() called\n");
+
+ /* Add specific widgets */
+ snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets,
+ ARRAY_SIZE(at91sam9g20ek_dapm_widgets));
+ /* Set up specific audio path interconnects */
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ /* not connected */
+ snd_soc_dapm_disable_pin(codec, "RLINEIN");
+ snd_soc_dapm_disable_pin(codec, "LLINEIN");
+
+ /* always connected */
+ snd_soc_dapm_enable_pin(codec, "Int Mic");
+ snd_soc_dapm_enable_pin(codec, "Ext Spk");
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct snd_soc_dai_link at91sam9g20ek_dai = {
+ .name = "WM8731",
+ .stream_name = "WM8731 PCM",
+ .cpu_dai = &atmel_ssc_dai[0],
+ .codec_dai = &wm8731_dai,
+ .init = at91sam9g20ek_wm8731_init,
+ .ops = &at91sam9g20ek_ops,
+};
+
+static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = {
+ .name = "WM8731",
+ .dai_link = &at91sam9g20ek_dai,
+ .num_links = 1,
+};
+
+static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = {
+ .i2c_address = 0x1b,
+};
+
+static struct snd_soc_device at91sam9g20ek_snd_devdata = {
+ .machine = &snd_soc_machine_at91sam9g20ek,
+ .platform = &at91_soc_platform,
+ .codec_dev = &soc_codec_dev_wm8731,
+ .codec_data = &at91sam9g20ek_wm8731_setup,
+};
+
+static struct platform_device *at91sam9g20ek_snd_device;
+
+static int __init at91sam9g20ek_init(void)
+{
+ int ret;
+
+ at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!at91sam9g20ek_snd_device) {
+ DBG("platform device allocation failed\n");
+ ret = -ENOMEM;
+ }
+
+ platform_set_drvdata(at91sam9g20ek_snd_device, &at91sam9g20ek_snd_devdata);
+ at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev;
+
+ ret = platform_device_add(at91sam9g20ek_snd_device);
+ if (ret) {
+ DBG("platform device add failed\n");
+ platform_device_put(at91sam9g20ek_snd_device);
+ }
+
+ return ret;
+}
+
+static void __exit at91sam9g20ek_exit(void)
+{
+ platform_device_unregister(at91sam9g20ek_snd_device);
+}
+
+module_init(at91sam9g20ek_init);
+module_exit(at91sam9g20ek_exit);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou at atmel.com>");
+MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 1db04a2..1595b04 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -12,7 +12,7 @@ config SND_SOC_WM8510
tristate
config SND_SOC_WM8731
- tristate
+ tristate "WM8731"
config SND_SOC_WM8750
tristate
More information about the Alsa-devel
mailing list