[alsa-devel] aplay not working

vasudha rao vasudha.jrao at gmail.com
Thu Sep 11 11:06:13 CEST 2008


Sir,
If you have, can you please send me the o/p of this comand,

$ls -lh /dev/snd/




Thank you..


On Thu, Sep 11, 2008 at 2:00 PM, dinesh <dinesh.dua at coraltele.com> wrote:

>  Hi,
> As per ur proc enteries you havn't registered any capture device so u can
> not do recording with ur device.
>
>
>
> -----Original Message-----
> *From*: vasudha rao <vasudha.jrao at gmail.com<vasudha%20rao%20%3cvasudha.jrao at gmail.com%3e>
> >
> *To*: aggarwal <anuj.aggarwal at gmail.com<aggarwal%20%3canuj.aggarwal at gmail.com%3e>
> >
> *Cc*: alsa-devel at alsa-project.org
> *Subject*: [alsa-devel] aplay not working
> *Date*: Thu, 11 Sep 2008 13:33:10 +0530
>
> Hi ,
>
> I am not able to do audio record also..
>
> I tried following commands..
>
> $arecord
> RIFF$��.WAVEfmt ... at .@.data��.Recording WAVE 'stdout' : Unsigned 8 bit, Rate
> 8000 Hz, Mono
> arecord: xrun:1037: read/write error, state = PREPARED
>
> $aplay -l
> **** List of PLAYBACK Hardware Devices ****
> card 0: AC97 [Atmel AC97], device 0: Atmel AC97 [Atmel AC97]
>   Subdevices: 1/1
>   Subdevice #0: subdevice #0
>
> $aplay
> aplay: main:508: audio open error: Inappropriate ioctl for device
>
> $cat /proc/asound/cards
>  0 [AC97           ]: ac97c - Atmel AC97
>                       Atmel AC97 Controller at 0xfffa0000, irq 18
>
>
> $cat /proc/asound/version
> Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09
> 09:56:17 2007 UTC).
>
> $cat /proc/asound/devices
>   2:        : timer
>   3:        : sequencer
>   4: [ 0- 0]: digital audio playback
>   5: [ 0]   : control
>
>
> Where I am doing wrong..
>
>
>
> Thank you..
> _______________________________________________
> Alsa-devel mailing listAlsa-devel at alsa-project.orghttp://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
>


More information about the Alsa-devel mailing list