[alsa-devel] snd-hda-intel overly loud when using OSS interface
Jan Engelhardt
jengelh at medozas.de
Sat Oct 4 14:52:16 CEST 2008
Hi,
[don't forget to Cc me]
I've got a Dell Precision 390 workstation, onboard sound running with
snd-hda-intel module.
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1b.0 0403: 8086:27d8 (rev 01)
When audio is output using the OSS interface (mpg123 or mplayer -ao
oss), output is overly loud and the PCM mixer control has no effect.
Master tuned in to 13% (alsamixer says dB gain=-40.50) is about the
level as when using the ALSA interface running with Master 58% (dB
gain=-19.50) with PCM 63% (dB gain=-19.50).
$ uname -a
Linux nuqneh 2.6.24-19-generic #1 SMP Thu Jul 10 22:38:03 PDT 2008 x86_64 GNU/Linux
/proc/asound:
$ cat cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xefffc000 irq 16
$ cat devices
0: [ 0] : control
1: : sequencer
4: [ 0- 0]: hardware dependent
16: [ 0- 0]: digital audio playback
24: [ 0- 0]: digital audio capture
33: : timer
$ cat hwdep
00-00: HDA Codec 0
$ cat modules
0 snd_hda_intel
$ cat pcm
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 1
$ cat timers
G0: system timer : 4000.000us (10000000 ticks)
P0-0-0: PCM playback 0-0-0 : SLAVE
Client application 22482 : running
P0-0-1: PCM capture 0-0-1 : SLAVE
$ cat version
Advanced Linux Sound Architecture Driver Version 1.0.16.
Compiled on Jul 11 2008 for kernel 2.6.24-19-generic (SMP).
$ cat /proc/asound/card0/codec#0
Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x102801de
Revision Id: 0x102201
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
GPIO: io=4, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x0a
Processing caps: benign=0, ncoeff=0
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x1e0]: 44100 48000 88200 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Delay: 3 samples
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo R/L
Connection: 3
0x02* 0x08 0x0a
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x400001f1: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 2
0x05* 0x0a
Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x0c
Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x12 0x12]
Connection: 1
0x07
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 5
0x10* 0x0f 0x0e 0x0d 0x12
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP Detect Trigger ImpSense
Pin Default 0x02214030: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=30, enabled=1
Connection: 1
0x0b
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP Detect Trigger ImpSense
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Connection: 1
0x0b
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect Trigger ImpSense
Pin Default 0x02a19020: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 1
0x0b
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01a19021: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x1
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x0b
Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00]
Pincap 0x0810: OUT
Pin Default 0x90100140: [Fixed] Speaker at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x13
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x01813122: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x2, Sequence = 0x2
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x07
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
More information about the Alsa-devel
mailing list