[alsa-devel] [PATCH] model for alc883 to support FUJITSU Pi2515
Jiang zhe
zhe.jiang at intel.com
Thu Mar 6 08:31:30 CET 2008
Hi,
Please refer to [0003800] on the alsa mantis.
There is no suitable model for Pi2515.
This model is to support it.
Thanks!
Best regards!
Jiang,zhe
Signed-off-by: Jiang zhe <zhe.jiang at intel.com>
--- alsa-driver-hg20080306/alsa-kernel/pci/hda/patch_realtek.c
2008-03-05 09:00:08.000000000 +0800
+++ b/alsa-kernel/pci/hda/patch_realtek.c 2008-03-06 15:20:46.000000000
+0800
@@ -202,6 +202,7 @@ enum {
ALC888_6ST_DELL,
ALC883_MITAC,
ALC883_CLEVO_M720R,
+ ALC883_FUJITSU_PI2515,
ALC883_AUTO,
ALC883_MODEL_LAST,
};
@@ -6484,6 +6485,14 @@ static struct hda_input_mux alc883_lenov
},
};
+static struct hda_input_mux alc883_fujitsu_pi2515_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x0 },
+ { "Int Mic", 0x1 },
+ },
+};
+
#define alc883_mux_enum_info alc_mux_enum_info
#define alc883_mux_enum_get alc_mux_enum_get
/* ALC883 has the ALC882-type input selection */
@@ -6673,6 +6682,33 @@ static struct snd_kcontrol_new alc883_cl
{ } /* end */
};
+static struct snd_kcontrol_new alc883_2ch_fujitsu_pi2515_mixer[] = {
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT),
+ HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 2,
+ .info = alc883_mux_enum_info,
+ .get = alc883_mux_enum_get,
+ .put = alc883_mux_enum_put,
+ },
+ { } /* end */
+};
+
static struct snd_kcontrol_new alc883_3ST_2ch_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -7220,6 +7256,20 @@ static struct hda_verb alc883_clevo_m720
{ } /* end */
};
+static struct hda_verb alc883_2ch_fujitsu_pi2515_verbs[] = {
+ /* HP */
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Subwoofer */
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+
+ /* enable unsolicited event */
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+
+ { } /* end */
+};
+
static struct hda_verb alc883_tagra_verbs[] = {
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
@@ -7423,6 +7473,25 @@ static void alc883_clevo_m720r_unsol_eve
alc883_clevo_m720r_automute(codec);
}
+/* toggle speaker-output according to the hp-jack state */
+static void alc883_2ch_fujitsu_pi2515_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned char bits;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? HDA_AMP_MUTE : 0;
+ snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, bits);
+}
+
+static void alc883_2ch_fujitsu_pi2515_unsol_event(struct hda_codec
*codec, unsigned int res)
+{
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc883_2ch_fujitsu_pi2515_automute(codec);
+}
+
static void alc883_haier_w66_automute(struct hda_codec *codec)
{
unsigned int present;
@@ -7661,6 +7730,7 @@ static const char *alc883_models[ALC883_
[ALC888_6ST_DELL] = "6stack-dell",
[ALC883_MITAC] = "mitac",
[ALC883_CLEVO_M720R] = "clevo-m720r",
+ [ALC883_FUJITSU_PI2515] = "fujitsu-pi2515",
[ALC883_AUTO] = "auto",
};
@@ -7706,6 +7776,7 @@ static struct snd_pci_quirk alc883_cfg_t
SND_PCI_QUIRK(0x1558, 0, "Clevo laptop", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
+ SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515",
ALC883_FUJITSU_PI2515),
SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch),
SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763),
@@ -7950,6 +8021,18 @@ static struct alc_config_preset alc883_p
.unsol_event = alc883_mitac_unsol_event,
.init_hook = alc883_mitac_automute,
},
+ [ALC883_FUJITSU_PI2515] = {
+ .mixers = { alc883_2ch_fujitsu_pi2515_mixer },
+ .init_verbs = { alc883_init_verbs, alc883_2ch_fujitsu_pi2515_verbs},
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+ .channel_mode = alc883_3ST_2ch_modes,
+ .input_mux = &alc883_fujitsu_pi2515_capture_source,
+ .unsol_event = alc883_2ch_fujitsu_pi2515_unsol_event,
+ .init_hook = alc883_2ch_fujitsu_pi2515_automute,
+ },
};
More information about the Alsa-devel
mailing list