[alsa-devel] [PATCH v3 3/3] ALSA SoC: Add Texas Instruments TLV320AIC26 codec driver
Grant Likely
grant.likely at secretlab.ca
Tue Jul 22 08:54:03 CEST 2008
From: Grant Likely <grant.likely at secretlab.ca>
ASoC Codec driver for the TLV320AIC26 device. As it stands, this driver
doesn't support all the modes and clocking options of the AIC16, but it
is a start.
Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
---
sound/soc/codecs/Kconfig | 4
sound/soc/codecs/Makefile | 2
sound/soc/codecs/tlv320aic26.c | 519 ++++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/tlv320aic26.h | 93 +++++++
4 files changed, 618 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 1db04a2..b399a64 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -47,6 +47,10 @@ config SND_SOC_CS4270_VD33_ERRATA
bool
depends on SND_SOC_CS4270
+config SND_SOC_TLV320AIC26
+ tristate "TI TLB320AIC26 Codec support"
+ depends on SND_SOC && SPI
+
config SND_SOC_TLV320AIC3X
tristate
depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index d7b97ab..dc0357e 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -9,6 +9,7 @@ snd-soc-wm8990-objs := wm8990.o
snd-soc-wm9712-objs := wm9712.o
snd-soc-wm9713-objs := wm9713.o
snd-soc-cs4270-objs := cs4270.o
+snd-soc-tlv320aic26-objs := tlv320aic26.o
snd-soc-tlv320aic3x-objs := tlv320aic3x.o
obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o
@@ -22,4 +23,5 @@ obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o
+obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o
obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o
diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c
new file mode 100644
index 0000000..4621fda
--- /dev/null
+++ b/sound/soc/codecs/tlv320aic26.c
@@ -0,0 +1,519 @@
+/*
+ * Texas Instruments TLV320AIC26 low power audio CODEC
+ * ALSA SoC CODEC driver
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/soc-of-simple.h>
+#include <sound/initval.h>
+
+#include "tlv320aic26.h"
+
+MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver");
+MODULE_AUTHOR("Grant Likely <grant.likely at secretlab.ca>");
+MODULE_LICENSE("GPL");
+
+/* AIC26 driver private data */
+struct aic26 {
+ struct spi_device *spi;
+ struct snd_soc_codec codec;
+ u16 reg_cache[AIC26_NUM_REGS]; /* shadow registers */
+ int master;
+ int datfm;
+ int mclk;
+
+ /* Keyclick parameters */
+ int keyclick_amplitude;
+ int keyclick_freq;
+ int keyclick_len;
+};
+
+/* ---------------------------------------------------------------------
+ * Register access routines
+ */
+static unsigned int aic26_reg_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ struct aic26 *aic26 = codec->private_data;
+ u16 *cache = codec->reg_cache;
+ u16 cmd, value;
+ u8 buffer[2];
+ int rc;
+
+ if (reg >= AIC26_NUM_REGS) {
+ WARN_ON_ONCE(1);
+ return 0;
+ }
+
+ /* Do SPI transfer; first 16bits are command; remaining is
+ * register contents */
+ cmd = AIC26_READ_COMMAND_WORD(reg);
+ buffer[0] = (cmd >> 8) & 0xff;
+ buffer[1] = cmd & 0xff;
+ rc = spi_write_then_read(aic26->spi, buffer, 2, buffer, 2);
+ if (rc) {
+ dev_err(&aic26->spi->dev, "AIC26 reg read error\n");
+ return -EIO;
+ }
+ value = (buffer[0] << 8) | buffer[1];
+
+ /* Update the cache before returning with the value */
+ cache[reg] = value;
+ return value;
+}
+
+static unsigned int aic26_reg_read_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+
+ if (reg >= AIC26_NUM_REGS) {
+ WARN_ON_ONCE(1);
+ return 0;
+ }
+
+ return cache[reg];
+}
+
+static int aic26_reg_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ struct aic26 *aic26 = codec->private_data;
+ u16 *cache = codec->reg_cache;
+ u16 cmd;
+ u8 buffer[4];
+ int rc;
+
+ if (reg >= AIC26_NUM_REGS) {
+ WARN_ON_ONCE(1);
+ return -EINVAL;
+ }
+
+ /* Do SPI transfer; first 16bits are command; remaining is data
+ * to write into register */
+ cmd = AIC26_WRITE_COMMAND_WORD(reg);
+ buffer[0] = (cmd >> 8) & 0xff;
+ buffer[1] = cmd & 0xff;
+ buffer[2] = value >> 8;
+ buffer[3] = value;
+ rc = spi_write(aic26->spi, buffer, 4);
+ if (rc) {
+ dev_err(&aic26->spi->dev, "AIC26 reg read error\n");
+ return -EIO;
+ }
+
+ /* update cache before returning */
+ cache[reg] = value;
+ return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Digital Audio Interface Operations
+ */
+static int aic26_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ struct aic26 *aic26 = codec->private_data;
+ int fsref, divisor, wlen, pval, jval, dval, qval;
+ u16 reg;
+
+ dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n",
+ substream, params);
+ dev_dbg(&aic26->spi->dev, "rate=%i format=%i\n", params_rate(params),
+ params_format(params));
+
+ switch (params_rate(params)) {
+ case 8000: fsref = 48000; divisor = AIC26_DIV_6; break;
+ case 11025: fsref = 44100; divisor = AIC26_DIV_4; break;
+ case 12000: fsref = 48000; divisor = AIC26_DIV_4; break;
+ case 16000: fsref = 48000; divisor = AIC26_DIV_3; break;
+ case 22050: fsref = 44100; divisor = AIC26_DIV_2; break;
+ case 24000: fsref = 48000; divisor = AIC26_DIV_2; break;
+ case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break;
+ case 44100: fsref = 44100; divisor = AIC26_DIV_1; break;
+ case 48000: fsref = 48000; divisor = AIC26_DIV_1; break;
+ default:
+ dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL;
+ }
+
+ /* select data word length */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8: wlen = AIC26_WLEN_16; break;
+ case SNDRV_PCM_FORMAT_S16_BE: wlen = AIC26_WLEN_16; break;
+ case SNDRV_PCM_FORMAT_S24_BE: wlen = AIC26_WLEN_24; break;
+ case SNDRV_PCM_FORMAT_S32_BE: wlen = AIC26_WLEN_32; break;
+ default:
+ dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
+ }
+
+ /* Configure PLL */
+ pval = 1;
+ jval = (fsref == 44100) ? 7 : 8;
+ dval = (fsref == 44100) ? 5264 : 1920;
+ qval = 0;
+ reg = 0x8000 | qval << 11 | pval << 8 | jval << 2;
+ aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg);
+ reg = dval << 2;
+ aic26_reg_write(codec, AIC26_REG_PLL_PROG2, reg);
+
+ /* Audio Control 3 (master mode, fsref rate) */
+ reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL3);
+ reg &= ~0xf800;
+ if (aic26->master)
+ reg |= 0x0800;
+ if (fsref == 48000)
+ reg |= 0x2000;
+ aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
+
+ /* Audio Control 1 (FSref divisor) */
+ reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL1);
+ reg &= ~0x0fff;
+ reg |= wlen | aic26->datfm | (divisor << 3) | divisor;
+ aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL1, reg);
+
+ return 0;
+}
+
+/**
+ * aic26_mute - Mute control to reduce noise when changing audio format
+ */
+static int aic26_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct aic26 *aic26 = codec->private_data;
+ u16 reg = aic26_reg_read_cache(codec, AIC26_REG_DAC_GAIN);
+
+ dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n",
+ dai, mute);
+
+ if (mute)
+ reg |= 0x8080;
+ else
+ reg &= ~0x8080;
+ aic26_reg_write(codec, AIC26_REG_DAC_GAIN, reg);
+
+ return 0;
+}
+
+static int aic26_set_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct aic26 *aic26 = codec->private_data;
+
+ dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i,"
+ " freq=%i, dir=%i)\n",
+ codec_dai, clk_id, freq, dir);
+
+ /* MCLK needs to fall between 2MHz and 50 MHz */
+ if ((freq < 2000000) || (freq > 50000000))
+ return -EINVAL;
+
+ aic26->mclk = freq;
+ return 0;
+}
+
+static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct aic26 *aic26 = codec->private_data;
+
+ dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n",
+ codec_dai, fmt);
+
+ /* set master/slave audio interface */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break;
+ case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break;
+ default:
+ dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL;
+ }
+
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S: aic26->datfm = AIC26_DATFM_I2S; break;
+ case SND_SOC_DAIFMT_DSP_A: aic26->datfm = AIC26_DATFM_DSP; break;
+ case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break;
+ case SND_SOC_DAIFMT_LEFT_J: aic26->datfm = AIC26_DATFM_LEFTJ; break;
+ default:
+ dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Digital Audio Interface Definition
+ */
+#define AIC26_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
+ SNDRV_PCM_RATE_48000)
+#define AIC26_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |\
+ SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE)
+
+struct snd_soc_dai aic26_dai = {
+ .name = "tlv320aic26",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = AIC26_RATES,
+ .formats = AIC26_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = AIC26_RATES,
+ .formats = AIC26_FORMATS,
+ },
+ .ops = {
+ .hw_params = aic26_hw_params,
+ },
+ .dai_ops = {
+ .digital_mute = aic26_mute,
+ .set_sysclk = aic26_set_sysclk,
+ .set_fmt = aic26_set_fmt,
+ },
+};
+EXPORT_SYMBOL_GPL(aic26_dai);
+
+/* ---------------------------------------------------------------------
+ * ALSA controls
+ */
+static const char *aic26_capture_src_text[] = {"Mic", "Aux"};
+static const struct soc_enum aic26_capture_src_enum =
+ SOC_ENUM_SINGLE(AIC26_REG_AUDIO_CTRL1, 12, 2, aic26_capture_src_text);
+
+static const struct snd_kcontrol_new aic26_snd_controls[] = {
+ /* Output */
+ SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1),
+ SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1),
+ SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0),
+ SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1),
+ SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0),
+ SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0),
+ SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0),
+ SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0),
+ SOC_ENUM("Capture Source", aic26_capture_src_enum),
+};
+
+/* ---------------------------------------------------------------------
+ * SoC CODEC portion of driver: probe and release routines
+ */
+static int aic26_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ struct snd_kcontrol *kcontrol;
+ struct aic26 *aic26;
+ int i, ret, err;
+
+ dev_info(&pdev->dev, "Probing AIC26 SoC CODEC driver\n");
+ dev_dbg(&pdev->dev, "socdev=%p\n", socdev);
+ dev_dbg(&pdev->dev, "codec_data=%p\n", socdev->codec_data);
+
+ /* Fetch the relevant aic26 private data here (it's already been
+ * stored in the .codec pointer) */
+ aic26 = socdev->codec_data;
+ if (aic26 == NULL) {
+ dev_err(&pdev->dev, "aic26: missing codec pointer\n");
+ return -ENODEV;
+ }
+ codec = &aic26->codec;
+ socdev->codec = codec;
+
+ dev_dbg(&pdev->dev, "Registering PCMs, dev=%p, socdev->dev=%p\n",
+ &pdev->dev, socdev->dev);
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "aic26: failed to create pcms\n");
+ return -ENODEV;
+ }
+
+ /* register controls */
+ dev_dbg(&pdev->dev, "Registering controls\n");
+ for (i = 0; i < ARRAY_SIZE(aic26_snd_controls); i++) {
+ kcontrol = snd_soc_cnew(&aic26_snd_controls[i], codec, NULL);
+ err = snd_ctl_add(codec->card, kcontrol);
+ WARN_ON(err < 0);
+ }
+
+ /* CODEC is setup, we can register the card now */
+ dev_dbg(&pdev->dev, "Registering card\n");
+ ret = snd_soc_register_card(socdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "aic26: failed to register card\n");
+ goto card_err;
+ }
+ return 0;
+
+ card_err:
+ snd_soc_free_pcms(socdev);
+ return ret;
+}
+
+static int aic26_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ snd_soc_free_pcms(socdev);
+ return 0;
+}
+
+struct snd_soc_codec_device aic26_soc_codec_dev = {
+ .probe = aic26_probe,
+ .remove = aic26_remove,
+};
+
+/* ---------------------------------------------------------------------
+ * SPI device portion of driver: sysfs files for debugging
+ */
+
+static ssize_t aic26_keyclick_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct aic26 *aic26 = dev_get_drvdata(dev);
+ int val, amp, freq, len;
+
+ val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2);
+ amp = (val >> 12) & 0x7;
+ freq = (125 << ((val >> 8) & 0x7)) >> 1;
+ len = 2 * (1 + ((val >> 4) & 0xf));
+
+ return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len);
+}
+
+/* Any write to the keyclick attribute will trigger the keyclick event */
+static ssize_t aic26_keyclick_set(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct aic26 *aic26 = dev_get_drvdata(dev);
+ int val;
+
+ val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2);
+ val |= 0x8000;
+ aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL2, val);
+
+ return count;
+}
+
+DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set);
+
+/* ---------------------------------------------------------------------
+ * SPI device portion of driver: probe and release routines and SPI
+ * driver registration.
+ */
+static int aic26_spi_probe(struct spi_device *spi)
+{
+ struct aic26 *aic26;
+ int rc, i, reg;
+
+ dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n");
+
+ /* Allocate driver data */
+ aic26 = kzalloc(sizeof *aic26, GFP_KERNEL);
+ if (!aic26)
+ return -ENOMEM;
+
+ /* Initialize the driver data */
+ aic26->spi = spi;
+ dev_set_drvdata(&spi->dev, aic26);
+
+ /* Setup what we can in the codec structure so that the register
+ * access functions will work as expected. More will be filled
+ * out when it is probed by the SoC CODEC part of this driver */
+ aic26->codec.private_data = aic26;
+ aic26->codec.name = "aic26";
+ aic26->codec.owner = THIS_MODULE;
+ aic26->codec.dai = &aic26_dai;
+ aic26->codec.num_dai = 1;
+ aic26->codec.read = aic26_reg_read;
+ aic26->codec.write = aic26_reg_write;
+ aic26->master = 1;
+ mutex_init(&aic26->codec.mutex);
+ INIT_LIST_HEAD(&aic26->codec.dapm_widgets);
+ INIT_LIST_HEAD(&aic26->codec.dapm_paths);
+ aic26->codec.reg_cache_size = AIC26_NUM_REGS;
+ aic26->codec.reg_cache = aic26->reg_cache;
+
+ /* Reset the codec to power on defaults */
+ aic26_reg_write(&aic26->codec, AIC26_REG_RESET, 0xBB00);
+
+ /* Power up CODEC */
+ aic26_reg_write(&aic26->codec, AIC26_REG_POWER_CTRL, 0);
+
+ /* Audio Control 3 (master mode, fsref rate) */
+ reg = aic26_reg_read(&aic26->codec, AIC26_REG_AUDIO_CTRL3);
+ reg &= ~0xf800;
+ reg |= 0x0800; /* set master mode */
+ aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL3, reg);
+
+ /* Fill register cache */
+ for (i = 0; i < ARRAY_SIZE(aic26->reg_cache); i++)
+ aic26_reg_read(&aic26->codec, i);
+
+ /* Register the sysfs files for debugging */
+ /* Create SysFS files */
+ rc = device_create_file(&spi->dev, &dev_attr_keyclick);
+ if (rc)
+ dev_info(&spi->dev, "error creating sysfs files\n");
+
+#if defined(CONFIG_SND_SOC_OF_SIMPLE)
+ /* Tell the of_soc helper about this codec */
+ of_snd_soc_register_codec(&aic26_soc_codec_dev, aic26, &aic26_dai,
+ spi->dev.archdata.of_node);
+#endif
+
+ dev_dbg(&spi->dev, "SPI device initialized\n");
+ return 0;
+}
+
+static int aic26_spi_remove(struct spi_device *spi)
+{
+ struct aic26 *aic26 = dev_get_drvdata(&spi->dev);
+
+ kfree(aic26);
+
+ return 0;
+}
+
+static struct spi_driver aic26_spi = {
+ .driver = {
+ .name = "tlv320aic26",
+ .owner = THIS_MODULE,
+ },
+ .probe = aic26_spi_probe,
+ .remove = aic26_spi_remove,
+};
+
+static int __init aic26_init(void)
+{
+ return spi_register_driver(&aic26_spi);
+}
+module_init(aic26_init);
+
+static void __exit aic26_exit(void)
+{
+ spi_unregister_driver(&aic26_spi);
+}
+module_exit(aic26_exit);
diff --git a/sound/soc/codecs/tlv320aic26.h b/sound/soc/codecs/tlv320aic26.h
new file mode 100644
index 0000000..62b1f22
--- /dev/null
+++ b/sound/soc/codecs/tlv320aic26.h
@@ -0,0 +1,93 @@
+/*
+ * Texas Instruments TLV320AIC26 low power audio CODEC
+ * register definitions
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ */
+
+#ifndef _TLV320AIC16_H_
+#define _TLV320AIC16_H_
+
+/* AIC26 Registers */
+#define AIC26_READ_COMMAND_WORD(addr) ((1 << 15) | (addr << 5))
+#define AIC26_WRITE_COMMAND_WORD(addr) ((0 << 15) | (addr << 5))
+#define AIC26_PAGE_ADDR(page, offset) ((page << 6) | offset)
+#define AIC26_NUM_REGS AIC26_PAGE_ADDR(3, 0)
+
+/* Page 0: Auxillary data registers */
+#define AIC26_REG_BAT1 AIC26_PAGE_ADDR(0, 0x05)
+#define AIC26_REG_BAT2 AIC26_PAGE_ADDR(0, 0x06)
+#define AIC26_REG_AUX AIC26_PAGE_ADDR(0, 0x07)
+#define AIC26_REG_TEMP1 AIC26_PAGE_ADDR(0, 0x09)
+#define AIC26_REG_TEMP2 AIC26_PAGE_ADDR(0, 0x0A)
+
+/* Page 1: Auxillary control registers */
+#define AIC26_REG_AUX_ADC AIC26_PAGE_ADDR(1, 0x00)
+#define AIC26_REG_STATUS AIC26_PAGE_ADDR(1, 0x01)
+#define AIC26_REG_REFERENCE AIC26_PAGE_ADDR(1, 0x03)
+#define AIC26_REG_RESET AIC26_PAGE_ADDR(1, 0x04)
+
+/* Page 2: Audio control registers */
+#define AIC26_REG_AUDIO_CTRL1 AIC26_PAGE_ADDR(2, 0x00)
+#define AIC26_REG_ADC_GAIN AIC26_PAGE_ADDR(2, 0x01)
+#define AIC26_REG_DAC_GAIN AIC26_PAGE_ADDR(2, 0x02)
+#define AIC26_REG_SIDETONE AIC26_PAGE_ADDR(2, 0x03)
+#define AIC26_REG_AUDIO_CTRL2 AIC26_PAGE_ADDR(2, 0x04)
+#define AIC26_REG_POWER_CTRL AIC26_PAGE_ADDR(2, 0x05)
+#define AIC26_REG_AUDIO_CTRL3 AIC26_PAGE_ADDR(2, 0x06)
+
+#define AIC26_REG_FILTER_COEFF_L_N0 AIC26_PAGE_ADDR(2, 0x07)
+#define AIC26_REG_FILTER_COEFF_L_N1 AIC26_PAGE_ADDR(2, 0x08)
+#define AIC26_REG_FILTER_COEFF_L_N2 AIC26_PAGE_ADDR(2, 0x09)
+#define AIC26_REG_FILTER_COEFF_L_N3 AIC26_PAGE_ADDR(2, 0x0A)
+#define AIC26_REG_FILTER_COEFF_L_N4 AIC26_PAGE_ADDR(2, 0x0B)
+#define AIC26_REG_FILTER_COEFF_L_N5 AIC26_PAGE_ADDR(2, 0x0C)
+#define AIC26_REG_FILTER_COEFF_L_D1 AIC26_PAGE_ADDR(2, 0x0D)
+#define AIC26_REG_FILTER_COEFF_L_D2 AIC26_PAGE_ADDR(2, 0x0E)
+#define AIC26_REG_FILTER_COEFF_L_D4 AIC26_PAGE_ADDR(2, 0x0F)
+#define AIC26_REG_FILTER_COEFF_L_D5 AIC26_PAGE_ADDR(2, 0x10)
+#define AIC26_REG_FILTER_COEFF_R_N0 AIC26_PAGE_ADDR(2, 0x11)
+#define AIC26_REG_FILTER_COEFF_R_N1 AIC26_PAGE_ADDR(2, 0x12)
+#define AIC26_REG_FILTER_COEFF_R_N2 AIC26_PAGE_ADDR(2, 0x13)
+#define AIC26_REG_FILTER_COEFF_R_N3 AIC26_PAGE_ADDR(2, 0x14)
+#define AIC26_REG_FILTER_COEFF_R_N4 AIC26_PAGE_ADDR(2, 0x15)
+#define AIC26_REG_FILTER_COEFF_R_N5 AIC26_PAGE_ADDR(2, 0x16)
+#define AIC26_REG_FILTER_COEFF_R_D1 AIC26_PAGE_ADDR(2, 0x17)
+#define AIC26_REG_FILTER_COEFF_R_D2 AIC26_PAGE_ADDR(2, 0x18)
+#define AIC26_REG_FILTER_COEFF_R_D4 AIC26_PAGE_ADDR(2, 0x19)
+#define AIC26_REG_FILTER_COEFF_R_D5 AIC26_PAGE_ADDR(2, 0x1A)
+
+#define AIC26_REG_PLL_PROG1 AIC26_PAGE_ADDR(2, 0x1B)
+#define AIC26_REG_PLL_PROG2 AIC26_PAGE_ADDR(2, 0x1C)
+#define AIC26_REG_AUDIO_CTRL4 AIC26_PAGE_ADDR(2, 0x1D)
+#define AIC26_REG_AUDIO_CTRL5 AIC26_PAGE_ADDR(2, 0x1E)
+
+/* fsref dividers; used in register 'Audio Control 1' */
+enum aic26_divisors {
+ AIC26_DIV_1 = 0,
+ AIC26_DIV_1_5 = 1,
+ AIC26_DIV_2 = 2,
+ AIC26_DIV_3 = 3,
+ AIC26_DIV_4 = 4,
+ AIC26_DIV_5 = 5,
+ AIC26_DIV_5_5 = 6,
+ AIC26_DIV_6 = 7,
+};
+
+/* Digital data format */
+enum aic26_datfm {
+ AIC26_DATFM_I2S = 0 << 8,
+ AIC26_DATFM_DSP = 1 << 8,
+ AIC26_DATFM_RIGHTJ = 2 << 8, /* right justified */
+ AIC26_DATFM_LEFTJ = 3 << 8, /* left justified */
+};
+
+/* Sample word length in bits; used in register 'Audio Control 1' */
+enum aic26_wlen {
+ AIC26_WLEN_16 = 0 << 10,
+ AIC26_WLEN_20 = 1 << 10,
+ AIC26_WLEN_24 = 2 << 10,
+ AIC26_WLEN_32 = 3 << 10,
+};
+
+#endif /* _TLV320AIC16_H_ */
More information about the Alsa-devel
mailing list