[alsa-devel] RME madiface

[D. Sen]

Sure ...going over to private email.

Florian Faber wrote:
> Dee,
> 
>>>> Any ideas?
>>> There is no difference on the MADI bus wether you use Windows, OS X
>>> or Linux. This seems to be a specific problem with the Euphonix.
>> I have no reason to believe the MADI bus is different. However, I
>> suspect the stream are different.
> 
> The MADI cards work autonomous, they are only controlled by a few 
> parameters. If the parameters are the same, the behaviour is the same. 
> Thus the settings must differ, and we have to find out where.
> 
>> I have two Euphonix boxes and they both behave perfectly under
>> windows - but not under linux. The main problem under linux is that
>> they lose sync - at the slightest electromagnetic interference (such
>> as turning off/on the speakers - on the analogue side - even from a
>> distance of 3 metres). 
> 
> I don't believe electromagnetic interference to be a reasonable cause 
> for this. What exactly is your setup - 1x 703 and 1x 713? And both lose 
> sync?
> 
> I just had a glance over the Euphonix' user manual and had to learn that 
> they cannot loop through MADI and you have to use the wordclock. So, 
> please, be a bit more specific about the setup - and maybe via private 
> mail, because that's of no relevance to alsa development..
> 
> 
> Flo