[alsa-devel] [PATCH] ALSA driver for SGI HAL2 audio device
Thomas Bogendoerfer
tsbogend at alpha.franken.de
Thu Jul 10 20:29:58 CEST 2008
This patch adds a new ALSA driver for the audio device found inside
many older SGI workstation (Indy, Indigo2). The hardware uses a SGI
custom chip, which feeds two codec chips, an IEC chip and a synth chip.
Currently only one of the codecs is supported. This driver already has
the same functionality as the HAL2 OSS driver and will replace it.
Signed-off-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
---
Please apply for 2.6.27.
sound/mips/Kconfig | 7 +
sound/mips/Makefile | 2 +
sound/mips/hal2.c | 947 +++++++++++++++++++++++++++++++++++++++++++++++++++
sound/mips/hal2.h | 245 +++++++++++++
4 files changed, 1201 insertions(+), 0 deletions(-)
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index 531f8ba..39e371d 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -11,5 +11,12 @@ config SND_AU1X00
help
ALSA Sound driver for the Au1x00's AC97 port.
+config SND_SGI_HAL2
+ tristate "SGI HAL2 Audio"
+ depends on SGI_HAS_HAL2
+ help
+ Sound support for the SGI Indy and Indigo2 Workstation.
+
+
endmenu
diff --git a/sound/mips/Makefile b/sound/mips/Makefile
index 47afed9..63f4a9c 100644
--- a/sound/mips/Makefile
+++ b/sound/mips/Makefile
@@ -3,6 +3,8 @@
#
snd-au1x00-objs := au1x00.o
+snd-sgi-hal2-objs := hal2.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
+obj-$(CONFIG_SND_SGI_HAL2) += snd-sgi-hal2.o
diff --git a/sound/mips/hal2.c b/sound/mips/hal2.c
new file mode 100644
index 0000000..db495be
--- /dev/null
+++ b/sound/mips/hal2.c
@@ -0,0 +1,947 @@
+/*
+ * Driver for A2 audio system used in SGI machines
+ * Copyright (c) 2008 Thomas Bogendoerfer <tsbogend at alpha.fanken.de>
+ *
+ * Based on OSS code from Ladislav Michl <ladis at linux-mips.org>, which
+ * was based on code from Ulf Carlsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/sgi/hpc3.h>
+#include <asm/sgi/ip22.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm-indirect.h>
+#include <sound/initval.h>
+
+#include "hal2.h"
+
+static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
+static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for SGI HAL2 soundcard.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for SGI HAL2 soundcard.");
+MODULE_DESCRIPTION("ALSA driver for SGI HAL2 audio");
+MODULE_AUTHOR("Thomas Bogendoerfer");
+MODULE_LICENSE("GPL");
+
+
+#define H2_BLOCK_SIZE 1024
+#define H2_BUF_SIZE 16384
+
+struct hal2_pbus {
+ struct hpc3_pbus_dmacregs *pbus;
+ int pbusnr;
+ unsigned int ctrl; /* Current state of pbus->pbdma_ctrl */
+};
+
+struct hal2_desc {
+ struct hpc_dma_desc desc;
+ u32 pad; /* padding */
+};
+
+struct hal2_codec {
+ struct snd_pcm_indirect pcm_indirect;
+ struct snd_pcm_substream *substream;
+
+ unsigned char *buffer;
+ dma_addr_t buffer_dma;
+ struct hal2_desc *desc;
+ dma_addr_t desc_dma;
+ int desc_count;
+ struct hal2_pbus pbus;
+ int voices; /* mono/stereo */
+ unsigned int sample_rate;
+ unsigned int master; /* Master frequency */
+ unsigned short mod; /* MOD value */
+ unsigned short inc; /* INC value */
+};
+
+#define H2_MIX_OUTPUT_ATT 0
+#define H2_MIX_INPUT_GAIN 1
+
+struct snd_hal2 {
+ struct snd_card *card;
+
+ struct hal2_ctl_regs *ctl_regs; /* HAL2 ctl registers */
+ struct hal2_aes_regs *aes_regs; /* HAL2 aes registers */
+ struct hal2_vol_regs *vol_regs; /* HAL2 vol registers */
+ struct hal2_syn_regs *syn_regs; /* HAL2 syn registers */
+
+ struct hal2_codec dac;
+ struct hal2_codec adc;
+};
+
+#define H2_INDIRECT_WAIT(regs) while (hal2_read(®s->isr) & H2_ISR_TSTATUS);
+
+#define H2_READ_ADDR(addr) (addr | (1<<7))
+#define H2_WRITE_ADDR(addr) (addr)
+
+static inline u32 hal2_read(u32 *reg)
+{
+ return __raw_readl(reg);
+}
+
+static inline void hal2_write(u32 val, u32 *reg)
+{
+ __raw_writel(val, reg);
+}
+
+
+static u32 hal2_i_read32(struct snd_hal2 *hal2, u16 addr)
+{
+ u32 ret;
+ struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+ hal2_write(H2_READ_ADDR(addr), ®s->iar);
+ H2_INDIRECT_WAIT(regs);
+ ret = hal2_read(®s->idr0) & 0xffff;
+ hal2_write(H2_READ_ADDR(addr) | 0x1, ®s->iar);
+ H2_INDIRECT_WAIT(regs);
+ ret |= (hal2_read(®s->idr0) & 0xffff) << 16;
+ return ret;
+}
+
+static void hal2_i_write16(struct snd_hal2 *hal2, u16 addr, u16 val)
+{
+ struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+ hal2_write(val, ®s->idr0);
+ hal2_write(0, ®s->idr1);
+ hal2_write(0, ®s->idr2);
+ hal2_write(0, ®s->idr3);
+ hal2_write(H2_WRITE_ADDR(addr), ®s->iar);
+ H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_write32(struct snd_hal2 *hal2, u16 addr, u32 val)
+{
+ struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+ hal2_write(val & 0xffff, ®s->idr0);
+ hal2_write(val >> 16, ®s->idr1);
+ hal2_write(0, ®s->idr2);
+ hal2_write(0, ®s->idr3);
+ hal2_write(H2_WRITE_ADDR(addr), ®s->iar);
+ H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_setbit16(struct snd_hal2 *hal2, u16 addr, u16 bit)
+{
+ struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+ hal2_write(H2_READ_ADDR(addr), ®s->iar);
+ H2_INDIRECT_WAIT(regs);
+ hal2_write((hal2_read(®s->idr0) & 0xffff) | bit, ®s->idr0);
+ hal2_write(0, ®s->idr1);
+ hal2_write(0, ®s->idr2);
+ hal2_write(0, ®s->idr3);
+ hal2_write(H2_WRITE_ADDR(addr), ®s->iar);
+ H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_clearbit16(struct snd_hal2 *hal2, u16 addr, u16 bit)
+{
+ struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+ hal2_write(H2_READ_ADDR(addr), ®s->iar);
+ H2_INDIRECT_WAIT(regs);
+ hal2_write((hal2_read(®s->idr0) & 0xffff) & ~bit, ®s->idr0);
+ hal2_write(0, ®s->idr1);
+ hal2_write(0, ®s->idr2);
+ hal2_write(0, ®s->idr3);
+ hal2_write(H2_WRITE_ADDR(addr), ®s->iar);
+ H2_INDIRECT_WAIT(regs);
+}
+
+static int hal2_gain_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0;
+ switch ((int)kcontrol->private_value) {
+ case H2_MIX_OUTPUT_ATT:
+ uinfo->value.integer.max = 31;
+ break;
+ case H2_MIX_INPUT_GAIN:
+ uinfo->value.integer.max = 15;
+ break;
+ }
+ return 0;
+}
+
+static int hal2_gain_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_hal2 *hal2 = snd_kcontrol_chip(kcontrol);
+ u32 tmp;
+ int l, r;
+
+ switch ((int)kcontrol->private_value) {
+ case H2_MIX_OUTPUT_ATT:
+ tmp = hal2_i_read32(hal2, H2I_DAC_C2);
+ if (tmp & H2I_C2_MUTE) {
+ l = 0;
+ r = 0;
+ } else {
+ l = 31 - ((tmp >> H2I_C2_L_ATT_SHIFT) & 31);
+ r = 31 - ((tmp >> H2I_C2_R_ATT_SHIFT) & 31);
+ }
+ break;
+ case H2_MIX_INPUT_GAIN:
+ tmp = hal2_i_read32(hal2, H2I_ADC_C2);
+ l = (tmp >> H2I_C2_L_GAIN_SHIFT) & 15;
+ r = (tmp >> H2I_C2_R_GAIN_SHIFT) & 15;
+ break;
+ }
+ ucontrol->value.integer.value[0] = l;
+ ucontrol->value.integer.value[1] = r;
+
+ return 0;
+}
+
+static int hal2_gain_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_hal2 *hal2 = snd_kcontrol_chip(kcontrol);
+ u32 old, new;
+ int l, r;
+
+ l = ucontrol->value.integer.value[0];
+ r = ucontrol->value.integer.value[1];
+
+ switch ((int)kcontrol->private_value) {
+ case H2_MIX_OUTPUT_ATT:
+ old = hal2_i_read32(hal2, H2I_DAC_C2);
+ new = old & ~(H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE);
+ if (l | r) {
+ l = 31 - l;
+ r = 31 - r;
+ new |= (l << H2I_C2_L_ATT_SHIFT);
+ new |= (r << H2I_C2_R_ATT_SHIFT);
+ } else
+ new |= H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE;
+ hal2_i_write32(hal2, H2I_DAC_C2, new);
+ break;
+ case H2_MIX_INPUT_GAIN:
+ old = hal2_i_read32(hal2, H2I_ADC_C2);
+ new = old & ~(H2I_C2_L_GAIN_M | H2I_C2_R_GAIN_M);
+ new |= (l << H2I_C2_L_GAIN_SHIFT);
+ new |= (r << H2I_C2_R_GAIN_SHIFT);
+ hal2_i_write32(hal2, H2I_ADC_C2, new);
+ break;
+ }
+ return old != new;
+}
+
+static struct snd_kcontrol_new hal2_ctrl_headphone __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Headphone Playback Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = H2_MIX_OUTPUT_ATT,
+ .info = hal2_gain_info,
+ .get = hal2_gain_get,
+ .put = hal2_gain_put,
+};
+
+static struct snd_kcontrol_new hal2_ctrl_mic __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Mic Capture Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .private_value = H2_MIX_INPUT_GAIN,
+ .info = hal2_gain_info,
+ .get = hal2_gain_get,
+ .put = hal2_gain_put,
+};
+
+static int __devinit hal2_mixer_create(struct snd_hal2 *hal2)
+{
+ int err;
+
+ /* mute DAC */
+ hal2_i_write32(hal2, H2I_DAC_C2,
+ H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE);
+ /* mute ADC */
+ hal2_i_write32(hal2, H2I_ADC_C2, 0);
+
+ err = snd_ctl_add(hal2->card,
+ snd_ctl_new1(&hal2_ctrl_headphone, hal2));
+ if (err < 0)
+ return err;
+
+ err = snd_ctl_add(hal2->card,
+ snd_ctl_new1(&hal2_ctrl_mic, hal2));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static irqreturn_t hal2_interrupt(int irq, void *dev_id)
+{
+ struct snd_hal2 *hal2 = dev_id;
+ irqreturn_t ret = IRQ_NONE;
+
+ /* decide what caused this interrupt */
+ if (hal2->dac.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
+ snd_pcm_period_elapsed(hal2->dac.substream);
+ ret = IRQ_HANDLED;
+ }
+ if (hal2->adc.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
+ snd_pcm_period_elapsed(hal2->adc.substream);
+ ret = IRQ_HANDLED;
+ }
+ return ret;
+}
+
+static int hal2_compute_rate(struct hal2_codec *codec, unsigned int rate)
+{
+ unsigned short mod;
+
+ if (44100 % rate < 48000 % rate) {
+ mod = 4 * 44100 / rate;
+ codec->master = 44100;
+ } else {
+ mod = 4 * 48000 / rate;
+ codec->master = 48000;
+ }
+
+ codec->inc = 4;
+ codec->mod = mod;
+ rate = 4 * codec->master / mod;
+
+ return rate;
+}
+
+static void hal2_set_dac_rate(struct snd_hal2 *hal2)
+{
+ unsigned int master = hal2->dac.master;
+ int inc = hal2->dac.inc;
+ int mod = hal2->dac.mod;
+
+ hal2_i_write16(hal2, H2I_BRES1_C1, (master == 44100) ? 1 : 0);
+ hal2_i_write32(hal2, H2I_BRES1_C2,
+ ((0xffff & (inc - mod - 1)) << 16) | inc);
+}
+
+static void hal2_set_adc_rate(struct snd_hal2 *hal2)
+{
+ unsigned int master = hal2->adc.master;
+ int inc = hal2->adc.inc;
+ int mod = hal2->adc.mod;
+
+ hal2_i_write16(hal2, H2I_BRES2_C1, (master == 44100) ? 1 : 0);
+ hal2_i_write32(hal2, H2I_BRES2_C2,
+ ((0xffff & (inc - mod - 1)) << 16) | inc);
+}
+
+static void hal2_setup_dac(struct snd_hal2 *hal2)
+{
+ unsigned int fifobeg, fifoend, highwater, sample_size;
+ struct hal2_pbus *pbus = &hal2->dac.pbus;
+
+ /* Now we set up some PBUS information. The PBUS needs information about
+ * what portion of the fifo it will use. If it's receiving or
+ * transmitting, and finally whether the stream is little endian or big
+ * endian. The information is written later, on the start call.
+ */
+ sample_size = 2 * hal2->dac.voices;
+ /* Fifo should be set to hold exactly four samples. Highwater mark
+ * should be set to two samples. */
+ highwater = (sample_size * 2) >> 1; /* halfwords */
+ fifobeg = 0; /* playback is first */
+ fifoend = (sample_size * 4) >> 3; /* doublewords */
+ pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_LD |
+ (highwater << 8) | (fifobeg << 16) | (fifoend << 24);
+ /* We disable everything before we do anything at all */
+ pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+ hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
+ /* Setup the HAL2 for playback */
+ hal2_set_dac_rate(hal2);
+ /* Set endianess */
+ hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX);
+ /* Set DMA bus */
+ hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
+ /* We are using 1st Bresenham clock generator for playback */
+ hal2_i_write16(hal2, H2I_DAC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
+ | (1 << H2I_C1_CLKID_SHIFT)
+ | (hal2->dac.voices << H2I_C1_DATAT_SHIFT));
+}
+
+static void hal2_setup_adc(struct snd_hal2 *hal2)
+{
+ unsigned int fifobeg, fifoend, highwater, sample_size;
+ struct hal2_pbus *pbus = &hal2->adc.pbus;
+
+ sample_size = 2 * hal2->adc.voices;
+ highwater = (sample_size * 2) >> 1; /* halfwords */
+ fifobeg = (4 * 4) >> 3; /* record is second */
+ fifoend = (4 * 4 + sample_size * 4) >> 3; /* doublewords */
+ pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_RCV | HPC3_PDMACTRL_LD |
+ (highwater << 8) | (fifobeg << 16) | (fifoend << 24);
+ pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+ hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
+ /* Setup the HAL2 for record */
+ hal2_set_adc_rate(hal2);
+ /* Set endianess */
+ hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR);
+ /* Set DMA bus */
+ hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
+ /* We are using 2nd Bresenham clock generator for record */
+ hal2_i_write16(hal2, H2I_ADC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
+ | (2 << H2I_C1_CLKID_SHIFT)
+ | (hal2->adc.voices << H2I_C1_DATAT_SHIFT));
+}
+
+static void hal2_start_dac(struct snd_hal2 *hal2)
+{
+ struct hal2_pbus *pbus = &hal2->dac.pbus;
+
+ pbus->pbus->pbdma_dptr = hal2->dac.desc_dma;
+ pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
+ /* enable DAC */
+ hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
+}
+
+static void hal2_start_adc(struct snd_hal2 *hal2)
+{
+ struct hal2_pbus *pbus = &hal2->adc.pbus;
+
+ pbus->pbus->pbdma_dptr = hal2->adc.desc_dma;
+ pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
+ /* enable ADC */
+ hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
+}
+
+static inline void hal2_stop_dac(struct snd_hal2 *hal2)
+{
+ hal2->dac.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+ /* The HAL2 itself may remain enabled safely */
+}
+
+static inline void hal2_stop_adc(struct snd_hal2 *hal2)
+{
+ hal2->adc.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+}
+
+static int hal2_alloc_dmabuf(struct hal2_codec *codec)
+{
+ struct hal2_desc *desc;
+ dma_addr_t desc_dma, buffer_dma;
+ int count = H2_BUF_SIZE / H2_BLOCK_SIZE;
+ int i;
+
+ codec->buffer = dma_alloc_noncoherent(NULL, H2_BUF_SIZE,
+ &buffer_dma, GFP_KERNEL);
+ if (!codec->buffer)
+ return -ENOMEM;
+ desc = dma_alloc_noncoherent(NULL, count * sizeof(struct hal2_desc),
+ &desc_dma, GFP_KERNEL);
+ if (!desc) {
+ dma_free_noncoherent(NULL, H2_BUF_SIZE,
+ codec->buffer, buffer_dma);
+ return -ENOMEM;
+ }
+ codec->buffer_dma = buffer_dma;
+ codec->desc_dma = desc_dma;
+ codec->desc = desc;
+ for (i = 0; i < count; i++) {
+ desc->desc.pbuf = buffer_dma + i * H2_BLOCK_SIZE;
+ desc->desc.cntinfo = HPCDMA_XIE | H2_BLOCK_SIZE;
+ desc->desc.pnext = (i == count - 1) ?
+ desc_dma : desc_dma + (i + 1) * sizeof(struct hal2_desc);
+ desc++;
+ }
+ dma_cache_sync(NULL, codec->desc, count * sizeof(struct hal2_desc),
+ DMA_TO_DEVICE);
+ codec->desc_count = count;
+ return 0;
+}
+
+static void hal2_free_dmabuf(struct hal2_codec *codec)
+{
+ dma_free_noncoherent(NULL, codec->desc_count * sizeof(struct hal2_desc),
+ codec->desc, codec->desc_dma);
+ dma_free_noncoherent(NULL, H2_BUF_SIZE, codec->buffer,
+ codec->buffer_dma);
+}
+
+static struct snd_pcm_hardware hal2_pcm_hw = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
+ .rates = SNDRV_PCM_RATE_8000_48000,
+ .rate_min = 8000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 65536,
+ .period_bytes_min = 1024,
+ .period_bytes_max = 65536,
+ .periods_min = 2,
+ .periods_max = 1024,
+};
+
+static int hal2_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ int err;
+
+ err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int hal2_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ return snd_pcm_lib_free_pages(substream);
+}
+
+static int hal2_playback_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+ int err;
+
+ runtime->hw = hal2_pcm_hw;
+
+ err = hal2_alloc_dmabuf(&hal2->dac);
+ if (err)
+ return err;
+ return 0;
+}
+
+static int hal2_playback_close(struct snd_pcm_substream *substream)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+ hal2_free_dmabuf(&hal2->dac);
+ return 0;
+}
+
+static int hal2_playback_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct hal2_codec *dac = &hal2->dac;
+
+ dac->voices = runtime->channels;
+ dac->sample_rate = hal2_compute_rate(dac, runtime->rate);
+ memset(&dac->pcm_indirect, 0, sizeof(dac->pcm_indirect));
+ dac->pcm_indirect.hw_buffer_size = H2_BUF_SIZE;
+ dac->pcm_indirect.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
+ dac->substream = substream;
+ hal2_setup_dac(hal2);
+ return 0;
+}
+
+static int hal2_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ hal2->dac.pcm_indirect.hw_io = hal2->dac.buffer_dma;
+ hal2->dac.pcm_indirect.hw_data = 0;
+ substream->ops->ack(substream);
+ hal2_start_dac(hal2);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ hal2_stop_dac(hal2);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static snd_pcm_uframes_t
+hal2_playback_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+ struct hal2_codec *dac = &hal2->dac;
+
+ return snd_pcm_indirect_playback_pointer(substream, &dac->pcm_indirect,
+ dac->pbus.pbus->pbdma_bptr);
+}
+
+static void hal2_playback_transfer(struct snd_pcm_substream *substream,
+ struct snd_pcm_indirect *rec, size_t bytes)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+ unsigned char *buf = hal2->dac.buffer + rec->hw_data;
+
+ memcpy(buf, substream->runtime->dma_area + rec->sw_data, bytes);
+ dma_cache_sync(NULL, buf, bytes, DMA_TO_DEVICE);
+
+}
+
+static int hal2_playback_ack(struct snd_pcm_substream *substream)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+ struct hal2_codec *dac = &hal2->dac;
+
+ dac->pcm_indirect.hw_queue_size = H2_BUF_SIZE / 2;
+ snd_pcm_indirect_playback_transfer(substream,
+ &dac->pcm_indirect,
+ hal2_playback_transfer);
+ return 0;
+}
+
+static int hal2_capture_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+ struct hal2_codec *adc = &hal2->adc;
+ int err;
+
+ runtime->hw = hal2_pcm_hw;
+
+ err = hal2_alloc_dmabuf(adc);
+ if (err)
+ return err;
+ return 0;
+}
+
+static int hal2_capture_close(struct snd_pcm_substream *substream)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+ hal2_free_dmabuf(&hal2->adc);
+ return 0;
+}
+
+static int hal2_capture_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct hal2_codec *adc = &hal2->adc;
+
+ adc->voices = runtime->channels;
+ adc->sample_rate = hal2_compute_rate(adc, runtime->rate);
+ memset(&adc->pcm_indirect, 0, sizeof(adc->pcm_indirect));
+ adc->pcm_indirect.hw_buffer_size = H2_BUF_SIZE;
+ adc->pcm_indirect.hw_queue_size = H2_BUF_SIZE / 2;
+ adc->pcm_indirect.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
+ adc->substream = substream;
+ hal2_setup_adc(hal2);
+ return 0;
+}
+
+static int hal2_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ hal2->adc.pcm_indirect.hw_io = hal2->adc.buffer_dma;
+ hal2->adc.pcm_indirect.hw_data = 0;
+ printk(KERN_DEBUG "buffer_dma %x\n", hal2->adc.buffer_dma);
+ hal2_start_adc(hal2);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ hal2_stop_adc(hal2);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static snd_pcm_uframes_t
+hal2_capture_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+ struct hal2_codec *adc = &hal2->adc;
+
+ return snd_pcm_indirect_capture_pointer(substream, &adc->pcm_indirect,
+ adc->pbus.pbus->pbdma_bptr);
+}
+
+static void hal2_capture_transfer(struct snd_pcm_substream *substream,
+ struct snd_pcm_indirect *rec, size_t bytes)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+ unsigned char *buf = hal2->adc.buffer + rec->hw_data;
+
+ dma_cache_sync(NULL, buf, bytes, DMA_FROM_DEVICE);
+ memcpy(substream->runtime->dma_area + rec->sw_data, buf, bytes);
+}
+
+static int hal2_capture_ack(struct snd_pcm_substream *substream)
+{
+ struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+ struct hal2_codec *adc = &hal2->adc;
+
+ snd_pcm_indirect_capture_transfer(substream,
+ &adc->pcm_indirect,
+ hal2_capture_transfer);
+ return 0;
+}
+
+static struct snd_pcm_ops hal2_playback_ops = {
+ .open = hal2_playback_open,
+ .close = hal2_playback_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = hal2_pcm_hw_params,
+ .hw_free = hal2_pcm_hw_free,
+ .prepare = hal2_playback_prepare,
+ .trigger = hal2_playback_trigger,
+ .pointer = hal2_playback_pointer,
+ .ack = hal2_playback_ack,
+};
+
+static struct snd_pcm_ops hal2_capture_ops = {
+ .open = hal2_capture_open,
+ .close = hal2_capture_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = hal2_pcm_hw_params,
+ .hw_free = hal2_pcm_hw_free,
+ .prepare = hal2_capture_prepare,
+ .trigger = hal2_capture_trigger,
+ .pointer = hal2_capture_pointer,
+ .ack = hal2_capture_ack,
+};
+
+static int __devinit hal2_pcm_create(struct snd_hal2 *hal2)
+{
+ struct snd_pcm *pcm;
+ int err;
+
+ /* create first pcm device with one outputs and one input */
+ err = snd_pcm_new(hal2->card, "SGI HAL2 Audio", 0, 1, 1, &pcm);
+ if (err < 0)
+ return err;
+
+ pcm->private_data = hal2;
+ strcpy(pcm->name, "SGI HAL2");
+
+ /* set operators */
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &hal2_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &hal2_capture_ops);
+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ 0, 1024 * 1024);
+
+ return 0;
+}
+
+static int hal2_dev_free(struct snd_device *device)
+{
+ struct snd_hal2 *hal2 = device->device_data;
+
+ free_irq(SGI_HPCDMA_IRQ, hal2);
+ kfree(hal2);
+ return 0;
+}
+
+static struct snd_device_ops hal2_ops = {
+ .dev_free = hal2_dev_free,
+};
+
+static void hal2_init_codec(struct hal2_codec *codec, struct hpc3_regs *hpc3,
+ int index)
+{
+ codec->pbus.pbusnr = index;
+ codec->pbus.pbus = &hpc3->pbdma[index];
+}
+
+static int hal2_detect(struct snd_hal2 *hal2)
+{
+ unsigned short board, major, minor;
+ unsigned short rev;
+
+ /* reset HAL2 */
+ hal2_write(0, &hal2->ctl_regs->isr);
+
+ /* release reset */
+ hal2_write(H2_ISR_GLOBAL_RESET_N | H2_ISR_CODEC_RESET_N,
+ &hal2->ctl_regs->isr);
+
+
+ hal2_i_write16(hal2, H2I_RELAY_C, H2I_RELAY_C_STATE);
+ rev = hal2_read(&hal2->ctl_regs->rev);
+ if (rev & H2_REV_AUDIO_PRESENT)
+ return -ENODEV;
+
+ board = (rev & H2_REV_BOARD_M) >> 12;
+ major = (rev & H2_REV_MAJOR_CHIP_M) >> 4;
+ minor = (rev & H2_REV_MINOR_CHIP_M);
+
+ printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n",
+ board, major, minor);
+
+ return 0;
+}
+
+static int hal2_create(struct snd_card *card, struct snd_hal2 **rchip)
+{
+ struct snd_hal2 *hal2;
+ struct hpc3_regs *hpc3 = hpc3c0;
+ int err;
+
+ hal2 = kzalloc(sizeof(struct snd_hal2), GFP_KERNEL);
+ if (!hal2)
+ return -ENOMEM;
+
+ hal2->card = card;
+
+ if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, IRQF_SHARED,
+ "SGI HAL2", hal2)) {
+ printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ);
+ kfree(hal2);
+ return -EAGAIN;
+ }
+
+ hal2->ctl_regs = (struct hal2_ctl_regs *)hpc3->pbus_extregs[0];
+ hal2->aes_regs = (struct hal2_aes_regs *)hpc3->pbus_extregs[1];
+ hal2->vol_regs = (struct hal2_vol_regs *)hpc3->pbus_extregs[2];
+ hal2->syn_regs = (struct hal2_syn_regs *)hpc3->pbus_extregs[3];
+
+ if (hal2_detect(hal2) < 0) {
+ kfree(hal2);
+ return -ENODEV;
+ }
+
+ hal2_init_codec(&hal2->dac, hpc3, 0);
+ hal2_init_codec(&hal2->adc, hpc3, 1);
+
+ /*
+ * All DMA channel interfaces in HAL2 are designed to operate with
+ * PBUS programmed for 2 cycles in D3, 2 cycles in D4 and 2 cycles
+ * in D5. HAL2 is a 16-bit device which can accept both big and little
+ * endian format. It assumes that even address bytes are on high
+ * portion of PBUS (15:8) and assumes that HPC3 is programmed to
+ * accept a live (unsynchronized) version of P_DREQ_N from HAL2.
+ */
+#define HAL2_PBUS_DMACFG ((0 << HPC3_DMACFG_D3R_SHIFT) | \
+ (2 << HPC3_DMACFG_D4R_SHIFT) | \
+ (2 << HPC3_DMACFG_D5R_SHIFT) | \
+ (0 << HPC3_DMACFG_D3W_SHIFT) | \
+ (2 << HPC3_DMACFG_D4W_SHIFT) | \
+ (2 << HPC3_DMACFG_D5W_SHIFT) | \
+ HPC3_DMACFG_DS16 | \
+ HPC3_DMACFG_EVENHI | \
+ HPC3_DMACFG_RTIME | \
+ (8 << HPC3_DMACFG_BURST_SHIFT) | \
+ HPC3_DMACFG_DRQLIVE)
+ /*
+ * Ignore what's mentioned in the specification and write value which
+ * works in The Real World (TM)
+ */
+ hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844;
+ hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844;
+
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, hal2, &hal2_ops);
+ if (err < 0) {
+ free_irq(SGI_HPCDMA_IRQ, hal2);
+ kfree(hal2);
+ return err;
+ }
+ *rchip = hal2;
+ return 0;
+}
+
+static int __devinit hal2_probe(struct platform_device *pdev)
+{
+ struct snd_card *card;
+ struct snd_hal2 *chip;
+ int err;
+
+ card = snd_card_new(index, id, THIS_MODULE, 0);
+ if (card == NULL)
+ return -ENOMEM;
+
+ err = hal2_create(card, &chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ snd_card_set_dev(card, &pdev->dev);
+
+ err = hal2_pcm_create(chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ err = hal2_mixer_create(chip);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+
+ strcpy(card->driver, "SGI HAL2 Audio");
+ strcpy(card->shortname, "SGI HAL2 Audio");
+ sprintf(card->longname, "%s irq %i",
+ card->shortname,
+ SGI_HPCDMA_IRQ);
+
+ err = snd_card_register(card);
+ if (err < 0) {
+ snd_card_free(card);
+ return err;
+ }
+ platform_set_drvdata(pdev, card);
+ return 0;
+}
+
+static int __exit hal2_remove(struct platform_device *pdev)
+{
+ struct snd_card *card = platform_get_drvdata(pdev);
+
+ snd_card_free(card);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver hal2_driver = {
+ .probe = hal2_probe,
+ .remove = __devexit_p(hal2_remove),
+ .driver = {
+ .name = "sgihal2",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init alsa_card_hal2_init(void)
+{
+ return platform_driver_register(&hal2_driver);
+}
+
+static void __exit alsa_card_hal2_exit(void)
+{
+ platform_driver_unregister(&hal2_driver);
+}
+
+module_init(alsa_card_hal2_init);
+module_exit(alsa_card_hal2_exit);
diff --git a/sound/mips/hal2.h b/sound/mips/hal2.h
new file mode 100644
index 0000000..f19828b
--- /dev/null
+++ b/sound/mips/hal2.h
@@ -0,0 +1,245 @@
+#ifndef __HAL2_H
+#define __HAL2_H
+
+/*
+ * Driver for HAL2 sound processors
+ * Copyright (c) 1999 Ulf Carlsson <ulfc at bun.falkenberg.se>
+ * Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis at linux-mips.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/types.h>
+
+/* Indirect status register */
+
+#define H2_ISR_TSTATUS 0x01 /* RO: transaction status 1=busy */
+#define H2_ISR_USTATUS 0x02 /* RO: utime status bit 1=armed */
+#define H2_ISR_QUAD_MODE 0x04 /* codec mode 0=indigo 1=quad */
+#define H2_ISR_GLOBAL_RESET_N 0x08 /* chip global reset 0=reset */
+#define H2_ISR_CODEC_RESET_N 0x10 /* codec/synth reset 0=reset */
+
+/* Revision register */
+
+#define H2_REV_AUDIO_PRESENT 0x8000 /* RO: audio present 0=present */
+#define H2_REV_BOARD_M 0x7000 /* RO: bits 14:12, board revision */
+#define H2_REV_MAJOR_CHIP_M 0x00F0 /* RO: bits 7:4, major chip revision */
+#define H2_REV_MINOR_CHIP_M 0x000F /* RO: bits 3:0, minor chip revision */
+
+/* Indirect address register */
+
+/*
+ * Address of indirect internal register to be accessed. A write to this
+ * register initiates read or write access to the indirect registers in the
+ * HAL2. Note that there af four indirect data registers for write access to
+ * registers larger than 16 byte.
+ */
+
+#define H2_IAR_TYPE_M 0xF000 /* bits 15:12, type of functional */
+ /* block the register resides in */
+ /* 1=DMA Port */
+ /* 9=Global DMA Control */
+ /* 2=Bresenham */
+ /* 3=Unix Timer */
+#define H2_IAR_NUM_M 0x0F00 /* bits 11:8 instance of the */
+ /* blockin which the indirect */
+ /* register resides */
+ /* If IAR_TYPE_M=DMA Port: */
+ /* 1=Synth In */
+ /* 2=AES In */
+ /* 3=AES Out */
+ /* 4=DAC Out */
+ /* 5=ADC Out */
+ /* 6=Synth Control */
+ /* If IAR_TYPE_M=Global DMA Control: */
+ /* 1=Control */
+ /* If IAR_TYPE_M=Bresenham: */
+ /* 1=Bresenham Clock Gen 1 */
+ /* 2=Bresenham Clock Gen 2 */
+ /* 3=Bresenham Clock Gen 3 */
+ /* If IAR_TYPE_M=Unix Timer: */
+ /* 1=Unix Timer */
+#define H2_IAR_ACCESS_SELECT 0x0080 /* 1=read 0=write */
+#define H2_IAR_PARAM 0x000C /* Parameter Select */
+#define H2_IAR_RB_INDEX_M 0x0003 /* Read Back Index */
+ /* 00:word0 */
+ /* 01:word1 */
+ /* 10:word2 */
+ /* 11:word3 */
+/*
+ * HAL2 internal addressing
+ *
+ * The HAL2 has "indirect registers" (idr) which are accessed by writing to the
+ * Indirect Data registers. Write the address to the Indirect Address register
+ * to transfer the data.
+ *
+ * We define the H2IR_* to the read address and H2IW_* to the write address and
+ * H2I_* to be fields in whatever register is referred to.
+ *
+ * When we write to indirect registers which are larger than one word (16 bit)
+ * we have to fill more than one indirect register before writing. When we read
+ * back however we have to read several times, each time with different Read
+ * Back Indexes (there are defs for doing this easily).
+ */
+
+/*
+ * Relay Control
+ */
+#define H2I_RELAY_C 0x9100
+#define H2I_RELAY_C_STATE 0x01 /* state of RELAY pin signal */
+
+/* DMA port enable */
+
+#define H2I_DMA_PORT_EN 0x9104
+#define H2I_DMA_PORT_EN_SY_IN 0x01 /* Synth_in DMA port */
+#define H2I_DMA_PORT_EN_AESRX 0x02 /* AES receiver DMA port */
+#define H2I_DMA_PORT_EN_AESTX 0x04 /* AES transmitter DMA port */
+#define H2I_DMA_PORT_EN_CODECTX 0x08 /* CODEC transmit DMA port */
+#define H2I_DMA_PORT_EN_CODECR 0x10 /* CODEC receive DMA port */
+
+#define H2I_DMA_END 0x9108 /* global dma endian select */
+#define H2I_DMA_END_SY_IN 0x01 /* Synth_in DMA port */
+#define H2I_DMA_END_AESRX 0x02 /* AES receiver DMA port */
+#define H2I_DMA_END_AESTX 0x04 /* AES transmitter DMA port */
+#define H2I_DMA_END_CODECTX 0x08 /* CODEC transmit DMA port */
+#define H2I_DMA_END_CODECR 0x10 /* CODEC receive DMA port */
+ /* 0=b_end 1=l_end */
+
+#define H2I_DMA_DRV 0x910C /* global PBUS DMA enable */
+
+#define H2I_SYNTH_C 0x1104 /* Synth DMA control */
+
+#define H2I_AESRX_C 0x1204 /* AES RX dma control */
+
+#define H2I_C_TS_EN 0x20 /* Timestamp enable */
+#define H2I_C_TS_FRMT 0x40 /* Timestamp format */
+#define H2I_C_NAUDIO 0x80 /* Sign extend */
+
+/* AESRX CTL, 16 bit */
+
+#define H2I_AESTX_C 0x1304 /* AES TX DMA control */
+#define H2I_AESTX_C_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */
+#define H2I_AESTX_C_CLKID_M 0x18
+#define H2I_AESTX_C_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */
+#define H2I_AESTX_C_DATAT_M 0x300
+
+/* CODEC registers */
+
+#define H2I_DAC_C1 0x1404 /* DAC DMA control, 16 bit */
+#define H2I_DAC_C2 0x1408 /* DAC DMA control, 32 bit */
+#define H2I_ADC_C1 0x1504 /* ADC DMA control, 16 bit */
+#define H2I_ADC_C2 0x1508 /* ADC DMA control, 32 bit */
+
+/* Bits in CTL1 register */
+
+#define H2I_C1_DMA_SHIFT 0 /* DMA channel */
+#define H2I_C1_DMA_M 0x7
+#define H2I_C1_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */
+#define H2I_C1_CLKID_M 0x18
+#define H2I_C1_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */
+#define H2I_C1_DATAT_M 0x300
+
+/* Bits in CTL2 register */
+
+#define H2I_C2_R_GAIN_SHIFT 0 /* right a/d input gain */
+#define H2I_C2_R_GAIN_M 0xf
+#define H2I_C2_L_GAIN_SHIFT 4 /* left a/d input gain */
+#define H2I_C2_L_GAIN_M 0xf0
+#define H2I_C2_R_SEL 0x100 /* right input select */
+#define H2I_C2_L_SEL 0x200 /* left input select */
+#define H2I_C2_MUTE 0x400 /* mute */
+#define H2I_C2_DO1 0x00010000 /* digital output port bit 0 */
+#define H2I_C2_DO2 0x00020000 /* digital output port bit 1 */
+#define H2I_C2_R_ATT_SHIFT 18 /* right d/a output - */
+#define H2I_C2_R_ATT_M 0x007c0000 /* attenuation */
+#define H2I_C2_L_ATT_SHIFT 23 /* left d/a output - */
+#define H2I_C2_L_ATT_M 0x0f800000 /* attenuation */
+
+#define H2I_SYNTH_MAP_C 0x1104 /* synth dma handshake ctrl */
+
+/* Clock generator CTL 1, 16 bit */
+
+#define H2I_BRES1_C1 0x2104
+#define H2I_BRES2_C1 0x2204
+#define H2I_BRES3_C1 0x2304
+
+#define H2I_BRES_C1_SHIFT 0 /* 0=48.0 1=44.1 2=aes_rx */
+#define H2I_BRES_C1_M 0x03
+
+/* Clock generator CTL 2, 32 bit */
+
+#define H2I_BRES1_C2 0x2108
+#define H2I_BRES2_C2 0x2208
+#define H2I_BRES3_C2 0x2308
+
+#define H2I_BRES_C2_INC_SHIFT 0 /* increment value */
+#define H2I_BRES_C2_INC_M 0xffff
+#define H2I_BRES_C2_MOD_SHIFT 16 /* modcontrol value */
+#define H2I_BRES_C2_MOD_M 0xffff0000 /* modctrl=0xffff&(modinc-1) */
+
+/* Unix timer, 64 bit */
+
+#define H2I_UTIME 0x3104
+#define H2I_UTIME_0_LD 0xffff /* microseconds, LSB's */
+#define H2I_UTIME_1_LD0 0x0f /* microseconds, MSB's */
+#define H2I_UTIME_1_LD1 0xf0 /* tenths of microseconds */
+#define H2I_UTIME_2_LD 0xffff /* seconds, LSB's */
+#define H2I_UTIME_3_LD 0xffff /* seconds, MSB's */
+
+struct hal2_ctl_regs {
+ u32 _unused0[4];
+ u32 isr; /* 0x10 Status Register */
+ u32 _unused1[3];
+ u32 rev; /* 0x20 Revision Register */
+ u32 _unused2[3];
+ u32 iar; /* 0x30 Indirect Address Register */
+ u32 _unused3[3];
+ u32 idr0; /* 0x40 Indirect Data Register 0 */
+ u32 _unused4[3];
+ u32 idr1; /* 0x50 Indirect Data Register 1 */
+ u32 _unused5[3];
+ u32 idr2; /* 0x60 Indirect Data Register 2 */
+ u32 _unused6[3];
+ u32 idr3; /* 0x70 Indirect Data Register 3 */
+};
+
+struct hal2_aes_regs {
+ u32 rx_stat[2]; /* Status registers */
+ u32 rx_cr[2]; /* Control registers */
+ u32 rx_ud[4]; /* User data window */
+ u32 rx_st[24]; /* Channel status data */
+
+ u32 tx_stat[1]; /* Status register */
+ u32 tx_cr[3]; /* Control registers */
+ u32 tx_ud[4]; /* User data window */
+ u32 tx_st[24]; /* Channel status data */
+};
+
+struct hal2_vol_regs {
+ u32 right; /* Right volume */
+ u32 left; /* Left volume */
+};
+
+struct hal2_syn_regs {
+ u32 _unused0[2];
+ u32 page; /* DOC Page register */
+ u32 regsel; /* DOC Register selection */
+ u32 dlow; /* DOC Data low */
+ u32 dhigh; /* DOC Data high */
+ u32 irq; /* IRQ Status */
+ u32 dram; /* DRAM Access */
+};
+
+#endif /* __HAL2_H */
More information about the Alsa-devel
mailing list