[alsa-devel] [PATCH] hda: In-Amp support for 92HD7xxx codecs.
Matthew Ranostay
mranostay at embeddedalley.com
Fri Jan 25 05:06:46 CET 2008
Takashi Iwai wrote:
> At Thu, 24 Jan 2008 11:54:02 -0500,
> Matthew Ranostay wrote:
>> Some 92HD7xxx codecs have amps on the ports to volume control and/or mute certain ports.
>> Also this makes stac92hd71bxx unmute amps lines in the init not needed.
>>
>> Signed-off-by: Matthew Ranostay <mranostay at embeddedalley.com>
>
> The patch will create more controls such as "Headphone Gain Playback
> Control". What would be a benifit to have both "Headphone" and
> "Headphone Gain" controls? I'd like to avoid redundancy if both
> provide a similar functionality.
>
Well as in the 92HD71Bxxx case it would be useless, but for 92HD73xx series where we have
two headphone outs which share the same DAC, you could control the gains/mutes for each HP port.
Same with the line-outs and speaker outs.
> Also, "Line In As Output Gain Playback Volume" is hard to understand.
> Let's make it simple.
>
Ok I can see your point here, "Line In As Output Gain Switch" is kinda no not needed now that
I think about it(since if you switch a port to output it powers down the in-amp).
As for "Line In As Output Gain Playback Volume" it could be changed to "Line In as Output Volume"
so that would be part of "Line In as Output" mixer, I think that would be more clear.
>
> thanks,
>
> Takashi
>
>
>> ---
>> diff -r 5bf4c5d02f4b pci/hda/patch_sigmatel.c
>> --- a/pci/hda/patch_sigmatel.c Thu Jan 24 15:32:15 2008 +0100
>> +++ b/pci/hda/patch_sigmatel.c Thu Jan 24 11:25:36 2008 -0500
>> @@ -577,10 +577,6 @@ static struct hda_verb stac92hd71bxx_cor
>> /* connect headphone jack to dac1 */
>> { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
>> { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Speaker */
>> - /* unmute right and left channels for nodes 0x0a, 0xd, 0x0f */
>> - { 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
>> - { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
>> - { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
>> };
>>
>> static struct hda_verb stac92hd71bxx_analog_core_init[] = {
>> @@ -594,11 +590,6 @@ static struct hda_verb stac92hd71bxx_ana
>> { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Speaker */
>> /* unmute dac0 input in audio mixer */
>> { 0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0x701f},
>> - /* unmute right and left channels for nodes 0x0a, 0xd, 0x0f */
>> - { 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
>> - { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
>> - { 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
>> - {}
>> };
>>
>> static struct hda_verb stac925x_core_init[] = {
>> @@ -2215,6 +2206,37 @@ static int create_controls(struct sigmat
>> return 0;
>> }
>>
>> +/* add playback controls for ports that have amps */
>> +static int stac92xx_create_amp_ctls(struct hda_codec *codec,
>> + hda_nid_t nid, char *pfx, int idx)
>> +{
>> + struct sigmatel_spec *spec = codec->spec;
>> + int err;
>> + char name[48];
>> + u32 caps = query_amp_caps(codec, nid, HDA_INPUT);
>> + if (idx)
>> + sprintf(name, "%s %d", pfx, idx);
>> + else
>> + strcpy(name, pfx);
>> +
>> + if ((caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT) {
>> + sprintf(name, "%s Playback Volume", name);
>> + err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL, name,
>> + HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
>> + if (err < 0)
>> + return err;
>> + }
>> +
>> + if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
>> + sprintf(name, "%s Playback Switch", name);
>> + err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE, name,
>> + HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
>> + if (err < 0)
>> + return err;
>> + }
>> + return 0;
>> +}
>> +
>> /* add playback controls from the parsed DAC table */
>> static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
>> const struct auto_pin_cfg *cfg)
>> @@ -2262,13 +2284,39 @@ static int stac92xx_auto_create_multi_ou
>> }
>> }
>>
>> - if (spec->line_switch)
>> - if ((err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH, "Line In as Output Switch", cfg->input_pins[AUTO_PIN_LINE] << 8)) < 0)
>> + if (spec->line_switch) {
>> + int val = cfg->input_pins[AUTO_PIN_LINE] << 8;
>> + wid_caps = get_wcaps(codec, val >> 8);
>> +
>> + err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
>> + "Line In as Output Switch", val);
>> + if (err < 0)
>> return err;
>>
>> - if (spec->mic_switch)
>> - if ((err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH, "Mic as Output Switch", (cfg->input_pins[AUTO_PIN_MIC] << 8) | 1)) < 0)
>> + if (wid_caps & AC_WCAP_IN_AMP) {
>> + err = stac92xx_create_amp_ctls(codec, val >> 8,
>> + "Line In as Output Gain", 0);
>> + if (err < 0)
>> + return err;
>> + }
>> + }
>> +
>> + if (spec->mic_switch) {
>> + int val = cfg->input_pins[AUTO_PIN_MIC] << 8;
>> + wid_caps = get_wcaps(codec, val >> 8);
>> +
>> + err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
>> + "Mic as Output Switch", val | 1);
>> + if (err < 0)
>> return err;
>> +
>> + if (wid_caps & AC_WCAP_IN_AMP) {
>> + err = stac92xx_create_amp_ctls(codec, val >> 8,
>> + "Mic as Output Gain", 0);
>> + if (err < 0)
>> + return err;
>> + }
>> + }
>>
>> return 0;
>> }
>> @@ -2311,6 +2359,13 @@ static int stac92xx_auto_create_hp_ctls(
>> spec->hp_detect = 1;
>> nid = snd_hda_codec_read(codec, cfg->hp_pins[i], 0,
>> AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
>> + if (wid_caps & AC_WCAP_IN_AMP) {
>> + err = stac92xx_create_amp_ctls(codec,
>> + cfg->hp_pins[i],
>> + "Headphone Gain", i);
>> + if (err < 0)
>> + return err;
>> + }
>> if (check_in_dac_nids(spec, nid))
>> nid = 0;
>> if (! nid)
>> @@ -2320,6 +2375,14 @@ static int stac92xx_auto_create_hp_ctls(
>> for (i = 0; i < cfg->speaker_outs; i++) {
>> nid = snd_hda_codec_read(codec, cfg->speaker_pins[i], 0,
>> AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
>> + if (get_wcaps(codec, cfg->speaker_pins[i]) & AC_WCAP_IN_AMP) {
>> + err = stac92xx_create_amp_ctls(codec,
>> + cfg->speaker_pins[i],
>> + "Speaker Gain", i);
>> + if (err < 0)
>> + return err;
>> + }
>> +
>> if (check_in_dac_nids(spec, nid))
>> nid = 0;
>> if (! nid)
>> @@ -2329,6 +2392,13 @@ static int stac92xx_auto_create_hp_ctls(
>> for (i = 0; i < cfg->line_outs; i++) {
>> nid = snd_hda_codec_read(codec, cfg->line_out_pins[i], 0,
>> AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
>> + if (get_wcaps(codec, cfg->line_out_pins[i]) & AC_WCAP_IN_AMP) {
>> + err = stac92xx_create_amp_ctls(codec,
>> + cfg->line_out_pins[i],
>> + "Line Out Gain", i);
>> + if (err < 0)
>> + return err;
>> + }
>> if (check_in_dac_nids(spec, nid))
>> nid = 0;
>> if (! nid)
>>
>
More information about the Alsa-devel
mailing list