[alsa-devel] Juli - function of specific GPIOs?
Pavel Hofman
pavel.hofman at insite.cz
Mon Jan 21 17:05:23 CET 2008
Takashi Iwai wrote:
> At Fri, 18 Jan 2008 22:41:51 +0100,
> Pavel Hofman wrote:
>
>>Hi Takashi,
>>
>>Sorry for distracting you from the constant struggle with HDA.
>>
>>I would like to provide complete support for the ESI Juli@ card.
>>Informing the ADC (AK5385) about current sample rate via the dedicated
>>GPIOs is fairly simple, as well as the monitoring features (DIGOUT,
>>DIGIN, ANAIN, MUTE + volume control of the remaining DACs).
>>
>>However, I do not understand functions of the GPIO_FREQ_XXKHZ and
>>GPIO_MULTI_XX GPIOs. The card's user manual says the card can detect
>>incoming SPDIF rate. AK4114 can either read the rate from the input data
>>in professional format only, or detect it by comparing external clock
>>with the input rate. The AK4114 external clock pin does go to the Xilinx
>>CPLD. The GPIOs lead to the CPLD too. Do they in some way control the
>>CPLD to provide AK4114 with external clock so that AK4114 can provide
>>correct input rate data through its registers?
>
>
> Sorry, I have little idea about Juli (and all ESI boards). The
> datasheet was given only to Jaroslav (cc'ed) at that time.
>
>
> Takashi
Takashi,
Thanks a lot for the info and sorry for overlooking the initial
changetset author.
Perhaps Jaroslav will find a few minutes to recall the old story, pěkně
prosím :)
Regards,
Pavel.
--
-----------------
inSITE, s.r.o.
Rubesova 29, 326 00 Plzen
Tel., fax: +420 - 37 - 74 493 58
GSM: +420 - 603 - 163 973
Email: pavel.hofman at insite.cz
More information about the Alsa-devel
mailing list