[alsa-devel] intel-hd on an intel G33 motherboard
Jiang zhe
zhe.jiang at intel.com
Fri Jan 11 05:58:07 CET 2008
On Thu, 2008-01-10 at 16:09 +0000, De Fuuss wrote:
> Hi,
>
> 6stack-dig, 6stack-hp: I tested all channels, and indeed I get sound but only from the headphone jack on the front. All other channels remain silent (front, center,rear,...)
>
Hi,
It's a little weird that the sound only come from headphone.
Seems that the 0x1b is the hp pin and 0x14 is the Front line out pin.
Both of them are connected to 0x0c widget.
If there is sound on hp, there should be sound on Front line out.
May you rebuild the alsa-driver with debug option to get some info?
./configure --with-debug=detect;
make;make install;
After reload the driver,
please show the result of "amixer contents",
"cat /proc/asound/card0/codec#0" and "dmesg".
Thanks!
> Regards,
>
> Patrick
>
> > From: zhe.jiang at intel.com
> > To: fuuss at hotmail.com
> > Date: Thu, 10 Jan 2008 13:46:42 +0800
> > CC: alsa-devel at alsa-project.org
> > Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard
> >
> > On Fri, 2007-12-28 at 19:09 +0800, De Fuuss wrote:
> >>
> >> Hi,
> >>
> >> Here's the pastebin information http://pastebin.ca/834640
> >>
> >> That was using 3stack-6ch-dig
> > The 3stack-6ch-dig won't work because it use 0x18 and 0x1a as
> > the effective pins, which is different from your pins layout.
> >>
> >> For experimentation's sake:
> >>
> >> If I use 6stack-dig I get the following http://pastebin.ca/834644
> >> If I use 6stack-hp I get the following http://pastebin.ca/834646
> >>
> > Did you do any testing with those two configures?
> > After analyzing your information,
> > I guess that you can get voice from the output jacks with those
> > configurations.
> >
> >
> >> Thanks for helping me out. It would be nice if it worked :-)
> >>
> >> Patrick
> >>
> >>> From: tdavis at dsl-only.net
> >>> To: fuuss at hotmail.com
> >>> Date: Thu, 27 Dec 2007 20:22:57 -0800
> >>> CC: alsa-devel at alsa-project.org
> >>> Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard
> >>>
> >>> Ok, need to step back in the thread a bit. Now that we've
> >> established
> >>> that this is not an Intel manufactured motherboard (not that they
> >> make
> >>> their own anymore), I need more detailed information on what the OS
> >>> see's. Please run
> >>> http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh and post
> >> the
> >>> link that it generates. This will give me a detailed snapshot of
> >> your
> >>> hardware that I can use for debugging.
> >>>
> >>> I will begin working on this as soon as I get this info. I hope to
> >> get
> >>> you enabled this weekend if possible, this year at the latest. :)
> >>>
> >>> Thanks,
> >>>
> >>> Tobin
> >> ----------------------------------------
> >>> From: tdavis at dsl-only.net
> >>> To: fuuss at hotmail.com
> >>> Date: Thu, 27 Dec 2007 20:22:57 -0800
> >>> CC: alsa-devel at alsa-project.org
> >>> Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard
> >>>
> >>> Ok, need to step back in the thread a bit. Now that we've
> >> established
> >>> that this is not an Intel manufactured motherboard (not that they
> >> make
> >>> their own anymore), I need more detailed information on what the OS
> >>> see's. Please run
> >>> http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh and post
> >> the
> >>> link that it generates. This will give me a detailed snapshot of
> >> your
> >>> hardware that I can use for debugging.
> >>>
> >>> I will begin working on this as soon as I get this info. I hope to
> >> get
> >>> you enabled this weekend if possible, this year at the latest. :)
> >>>
> >>> Thanks,
> >>>
> >>> Tobin
> >>>
> >>>
> >>> On Thu, 2007-12-27 at 00:33 +0000, De Fuuss wrote:
> >>>
> >>>> Hi Tobin,
> >>>>
> >>>> Thanks for you quick reply.
> >>>>
> >>>> I tried both 3stack-6ch and 3stack-6ch-dig (the card has a spdif
> >> out). I found out that when putting on headphones on a separate
> >> headphone jack I get some sound with both settings. Hoever, the front
> >> out l/r, center/bass sourround back l/r and side sourround l/r port
> >> remain silent.
> >>>>
> >>>> I set all channels to 80-100% in alsamixer.
> >>>>
> >>>> A few more details from my setup:
> >>>> Shuttle XPC SG33G5M
> >>>> Intel G33 Express + ICH9DH
> >>>>
> >>>> Interestingly, when I run alsamixer, it identifies the Chip as
> >> "Generic 1095 ID 1392", in other words in points to codec#1. I thought
> >> it should point to codec#0, e.g. RealTek ALC888
> >>>>
> >>>> I have the strong impression that the channels are not truly set by
> >> alsamixer as they point to the wrong codec. I'm only a layman in ALSA,
> >> and I have no idea how to tell alsamixer to consider codec#0 instead
> >> codec#1.
> >>>>
> >>>> Do you have any idea on how to crack this nut?
> >>>>
> >>>> Below is the output of both codecs:
> >>>>
> >>>> Thank you.
> >>>>
> >>>> Best regards,
> >>>>
> >>>> Patrick
> >>>>
> >>>> ____________________
> >>>> #cat /proc/asound/cards
> >>>>
> >>>> 0 [Intel ]: HDA-Intel - HDA Intel
> >>>> HDA Intel at 0xfdff8000 irq 22
> >>>>
> >>>> # cat /proc/asound/Intel/codec#0
> >>>> Codec: Realtek ALC888
> >>>> Address: 0
> >>>> Vendor Id: 0x10ec0888
> >>>> Subsystem Id: 0x12970888
> >>>> Revision Id: 0x100001
> >>>> No Modem Function Group found
> >>>> Default PCM:
> >>>> rates [0x560]: 44100 48000 96000 192000
> >>>> bits [0xe]: 16 20 24
> >>>> formats [0x1]: PCM
> >>>> Default Amp-In caps: N/A
> >>>> Default Amp-Out caps: N/A
> >>>> Node 0x02 [Audio Output] wcaps 0x11: Stereo
> >>>> PCM:
> >>>> rates [0x560]: 44100 48000 96000 192000
> >>>> bits [0xe]: 16 20 24
> >>>> formats [0x1]: PCM
> >>>> Node 0x03 [Audio Output] wcaps 0x11: Stereo
> >>>> PCM:
> >>>> rates [0x560]: 44100 48000 96000 192000
> >>>> bits [0xe]: 16 20 24
> >>>> formats [0x1]: PCM
> >>>> Node 0x04 [Audio Output] wcaps 0x11: Stereo
> >>>> PCM:
> >>>> rates [0x560]: 44100 48000 96000 192000
> >>>> bits [0xe]: 16 20 24
> >>>> formats [0x1]: PCM
> >>>> Node 0x05 [Audio Output] wcaps 0x11: Stereo
> >>>> PCM:
> >>>> rates [0x560]: 44100 48000 96000 192000
> >>>> bits [0xe]: 16 20 24
> >>>> formats [0x1]: PCM
> >>>> Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
> >>>> PCM:
> >>>> rates [0x5e0]: 44100 48000 88200 96000 192000
> >>>> bits [0x1e]: 16 20 24 32
> >>>> formats [0x1]: PCM
> >>>> Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
> >>>> Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
> >>>> Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
> >>>> Amp-In vals: [0x9f 0x9f]
> >>>> PCM:
> >>>> rates [0x160]: 44100 48000 96000
> >>>> bits [0x6]: 16 20
> >>>> formats [0x1]: PCM
> >>>> Connection: 1
> >>>> 0x23
> >>>> Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
> >>>> Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
> >>>> Amp-In vals: [0x9f 0x9f]
> >>>> PCM:
> >>>> rates [0x160]: 44100 48000 96000
> >>>> bits [0x6]: 16 20
> >>>> formats [0x1]: PCM
> >>>> Connection: 1
> >>>> 0x22
> >>>> Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
> >>>> PCM:
> >>>> rates [0x560]: 44100 48000 96000 192000
> >>>> bits [0x1e]: 16 20 24 32
> >>>> formats [0x1]: PCM
> >>>> Connection: 1
> >>>> 0x1f
> >>>> Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> >>>> Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> >>>> Amp-In vals: [0x80 0x80] [0x80 0x80] [0x9d 0x9d] [0x80 0x80]
> >> [0x9f 0x9f] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
> >> 0x80]
> >>>> Connection: 10
> >>>> 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
> >>>> Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
> >>>> Amp-Out vals: [0x1d 0x1d]
> >>>> Connection: 2
> >>>> 0x02 0x0b
> >>>> Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
> >>>> Amp-Out vals: [0x1f 0x1f]
> >>>> Connection: 2
> >>>> 0x03 0x0b
> >>>> Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
> >>>> Amp-Out vals: [0x1f 0x1f]
> >>>> Connection: 2
> >>>> 0x04 0x0b
> >>>> Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-In vals: [0x80 0x80] [0x80 0x80]
> >>>> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
> >>>> Amp-Out vals: [0x00 0x00]
> >>>> Connection: 2
> >>>> 0x05 0x0b
> >>>> Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
> >>>> Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
> >>>> Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
> >>>> Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
> >>>> Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
> >> [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-Out vals: [0x00 0x00]
> >>>> Pincap 0x083e: IN OUT HP Detect
> >>>> Pin Default 0x01014010: [Jack] Line Out at Ext Rear
> >>>> Conn = 1/8, Color = Green
> >>>> Pin-ctls: 0x40: OUT
> >>>> Connection: 5
> >>>> 0x0c* 0x0d 0x0e 0x0f 0x26
> >>>> Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
> >> [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-Out vals: [0x00 0x00]
> >>>> Pincap 0x083e: IN OUT HP Detect
> >>>> Pin Default 0x01011012: [Jack] Line Out at Ext Rear
> >>>> Conn = 1/8, Color = Black
> >>>> Pin-ctls: 0x40: OUT
> >>>> Connection: 5
> >>>> 0x0c 0x0d* 0x0e 0x0f 0x26
> >>>> Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
> >> [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-Out vals: [0x00 0x00]
> >>>> Pincap 0x0836: IN OUT Detect
> >>>> Pin Default 0x01016011: [Jack] Line Out at Ext Rear
> >>>> Conn = 1/8, Color = Orange
> >>>> Pin-ctls: 0x40: OUT
> >>>> Connection: 5
> >>>> 0x0c 0x0d 0x0e* 0x0f 0x26
> >>>> Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
> >> [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-Out vals: [0x00 0x00]
> >>>> Pincap 0x0836: IN OUT Detect
> >>>> Pin Default 0x01012014: [Jack] Line Out at Ext Rear
> >>>> Conn = 1/8, Color = Grey
> >>>> Pin-ctls: 0x40: OUT
> >>>> Connection: 5
> >>>> 0x0c 0x0d 0x0e 0x0f* 0x26
> >>>> Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
> >> [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-Out vals: [0x00 0x00]
> >>>> Pincap 0x08373e: IN OUT HP Detect
> >>>> Pin Default 0x01813040: [Jack] Line In at Ext Rear
> >>>> Conn = 1/8, Color = Blue
> >>>> Pin-ctls: 0x40: OUT
> >>>> Connection: 5
> >>>> 0x0c 0x0d 0x0e* 0x0f 0x26
> >>>> Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
> >> [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-Out vals: [0x80 0x80]
> >>>> Pincap 0x08373e: IN OUT HP Detect
> >>>> Pin Default 0x02a19850: [Jack] Mic at Ext Front
> >>>> Conn = 1/8, Color = Pink
> >>>> Pin-ctls: 0x24: IN
> >>>> Connection: 5
> >>>> 0x0c* 0x0d 0x0e 0x0f 0x26
> >>>> Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
> >> [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-Out vals: [0x00 0x00]
> >>>> Pincap 0x08373e: IN OUT HP Detect
> >>>> Pin Default 0x9993014f: [Fixed] Aux at Int ATAPI
> >>>> Conn = ATAPI, Color = Unknown
> >>>> Pin-ctls: 0x40: OUT
> >>>> Connection: 5
> >>>> 0x0c 0x0d* 0x0e 0x0f 0x26
> >>>> Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
> >> [0x00 0x00]
> >>>> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-Out vals: [0x00 0x00]
> >>>> Pincap 0x08373e: IN OUT HP Detect
> >>>> Pin Default 0x02214020: [Jack] HP Out at Ext Front
> >>>> Conn = 1/8, Color = Green
> >>>> Pin-ctls: 0xc0: OUT HP
> >>>> Connection: 5
> >>>> 0x0c* 0x0d 0x0e 0x0f 0x26
> >>>> Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
> >>>> Pincap 0x0820: IN
> >>>> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> >>>> Conn = 1/8, Color = Black
> >>>> Pin-ctls: 0x20: IN
> >>>> Node 0x1d [Pin Complex] wcaps 0x400000: Mono
> >>>> Pincap 0x0820: IN
> >>>> Pin Default 0x4005a603: [N/A] Line Out at Ext N/A
> >>>> Conn = Optical, Color = UNKNOWN
> >>>> Pin-ctls: 0x20: IN
> >>>> Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
> >>>> Pincap 0x0810: OUT
> >>>> Pin Default 0x01451130: [Jack] SPDIF Out at Ext Rear
> >>>> Conn = Optical, Color = Black
> >>>> Pin-ctls: 0x40: OUT
> >>>> Connection: 1
> >>>> 0x06
> >>>> Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
> >>>> Pincap 0x0820: IN
> >>>> Pin Default 0x01c59160: [Jack] SPDIF In at Ext Rear
> >>>> Conn = Optical, Color = Pink
> >>>> Pin-ctls: 0x20: IN
> >>>> Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
> >>>> Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
> >>>> Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> >>>> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80]
> >> [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
> >> 0x80] [0x80 0x80]
> >>>> Connection: 11
> >>>> 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
> >>>> Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> >>>> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80]
> >> [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
> >> 0x80] [0x80 0x80]
> >>>> Connection: 11
> >>>> 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
> >>>> Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
> >>>> Node 0x25 [Audio Output] wcaps 0x11: Stereo
> >>>> PCM:
> >>>> rates [0x560]: 44100 48000 96000 192000
> >>>> bits [0xe]: 16 20 24
> >>>> formats [0x1]: PCM
> >>>> Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
> >>>> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-In vals: [0x00 0x00] [0x80 0x80]
> >>>> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
> >>>> Amp-Out vals: [0x00 0x00]
> >>>> Connection: 2
> >>>> 0x25 0x0b
> >>>>
> >>>> A second codec sits at /proc/asound/Intel/codec#0. A cat results
> >> in:
> >>>>
> >>>> Codec: Generic 1095 ID 1392
> >>>> Address: 1
> >>>> Vendor Id: 0x10951392
> >>>> Subsystem Id: 0xffffffff
> >>>> Revision Id: 0x100000
> >>>> No Modem Function Group found
> >>>> Default PCM:
> >>>> rates [0x0]:
> >>>> bits [0x0]:
> >>>> formats [0x0]:
> >>>> Default Amp-In caps: N/A
> >>>> Default Amp-Out caps: N/A
> >>>> Node 0x02 [Audio Output] wcaps 0x6211: Stereo Digital
> >>>> PCM:
> >>>> rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
> >>>> bits [0x1e]: 16 20 24 32
> >>>> formats [0x5]: PCM AC3
> >>>> Node 0x03 [Pin Complex] wcaps 0x40738d: Stereo Digital Amp-Out
> >>>> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> >>>> Amp-Out vals: [0x80 0x80]
> >>>> Pincap 0x0894: OUT Detect
> >>>> Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
> >>>> Conn = Digital, Color = Unknown
> >>>> Pin-ctls: 0x00:
> >>>> Connection: 1
> >>>> 0x02
> >>>>
> >>>>
> >>>>> From: tdavis at dsl-only.net
> >>>>> To: fuuss at hotmail.com
> >>>>> Date: Wed, 26 Dec 2007 11:30:28 -0800
> >>>>> CC: alsa-devel at alsa-project.org
> >>>>> Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard
> >>>>>
> >>>>> Try "model=3stack-6ch". Also, if you look in the
> >>>>>
> >> alsa-driver-1.0.15/alsa-kernel/Documentation/Alsa-Configuration.txt
> >>>>> file, there are other models you can select for the alc883/888
> >> codec.
> >>>>>
> >>>>> Let me know if this works and I'll add your system to the driver.
> >>>>>
> >>>>> Tobin
> >>>>>
> >>>>> On Wed, 2007-12-26 at 18:42 +0000, De Fuuss wrote:
> >>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> Maybe I'm missing something, but I've failed to get even the
> >> slightest
> >>>>>> noise out of the onboard sound card from a Intel G33 motherboard.
> >> I
> >>>>>> tried the alsa drivers from the alsa-driver-1.0.15 package as
> >> well as
> >>>>>> the the alsa drivers provided by kernel 2.6.23 (built as
> >> modules), to
> >>>>>> no avail.
> >>>>>>
> >>>>>> The sound chip is identified as a Intel HDA / Realtek ALC888 on
> >> the Intel G33 ICH9 motherboard.
> >>>>>>
> >>>>>> After reading some of the documentation from the ALSA site and
> >> googling through half the internet I haven't found out yet if this
> >> specific sound card is supported by ALSA and if some module options
> >> must be passed (such as options snd-intel-hda model=.....).
> >>>>>>
> >>>>>> Could somebody be so kind as to point me into the right
> >> direction?
> >>>>>>
> >>>>>> Thank you.
> >>>>>>
> >>>>>> Best regards,
> >>>>>>
> >>>>>> Patrick
> >>>>>>
> >>>>>> _________________________________________________________________
> >>>>>> Express yourself instantly with MSN Messenger! Download today
> >> it's FREE!
> >>>>>> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> >>>>>> _______________________________________________
> >>>>>> Alsa-devel mailing list
> >>>>>> Alsa-devel at alsa-project.org
> >>>>>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >>>>>
> >>>>> --
> >>>>> Tobin Davis
> >>>>>
> >>>>>
> >>>>> TONY RANDALL! Is YOUR life a PATIO of FUN??
> >>>>> _______________________________________________
> >>>>> Alsa-devel mailing list
> >>>>> Alsa-devel at alsa-project.org
> >>>>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >>>>
> >>>> _________________________________________________________________
> >>>> Express yourself instantly with MSN Messenger! Download today it's
> >> FREE!
> >>>> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> >>>> _______________________________________________
> >>>> Alsa-devel mailing list
> >>>> Alsa-devel at alsa-project.org
> >>>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >>>
> >>> --
> >>> Tobin Davis
> >>>
> >>>
> >>> Authors are easy to get on with -- if you're fond of children.
> >>> -- Michael Joseph, "Observer"
> >>
> >> _________________________________________________________________
> >> Express yourself instantly with MSN Messenger! Download today it's
> >> FREE!
> >> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> >> _______________________________________________
> >> Alsa-devel mailing list
> >> Alsa-devel at alsa-project.org
> >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >>
> >>
> >
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel at alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
> _________________________________________________________________
> Express yourself instantly with MSN Messenger! Download today it's FREE!
> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
More information about the Alsa-devel
mailing list