[alsa-devel] snd-hda-intel support for SPDIF-in wiht vt1708 card?
Takashi Iwai
tiwai at suse.de
Wed Jan 9 17:29:13 CET 2008
At Wed, 09 Jan 2008 02:06:53 -0800,
John Stile wrote:
>
> On Wed, 2008-01-09 at 08:39 +0100, Takashi Iwai wrote:
> > Thanks.
> You are welcome. Thank you for your patience.
>
> > You can put alsa-driver and alsa-kernel in the same directory level.
> > Make in alsa-driver will create a symlink automatically from
> > ../alsa-kernel.
> My procedure is changed:
> cd /usr/src/
> rm -rf alsa-lib
> rm -rf alsa-utils
> rm -rf alsa-driver
> rm -rf alsa-driver
> hg clone http://hg-mirror.alsa-project.org/alsa-lib alsa-lib
> hg clone http://hg-mirror.alsa-project.org/alsa-utils alsa-utils
> hg clone http://hg-mirror.alsa-project.org/alsa-kernel alsa-kernel
> hg clone http://hg-mirror.alsa-project.org/alsa-driver alsa-driver
> pushd alsa-lib
> ./hgcompile && make install
To be sure: you are using 32bit version, right?
For 64bit, the library path might be /usr/lib64, instead of /usr/lib
(depending on distro).
> popd
> pushd alsa-utils
> ./hgcompile && make install
> popd
> cd alsa-driver
> ./hgcompile && make install
> popd
> # Build completed successfully. Yay.
> /usr/sbin/alsaconf
> # Chose 'hda-intel VIA Technologies, Inc. VIA High Definition Audio Controller"
> /usr/bin/alsamixer -Vall
So far so good.
>
> IEC958 shows
> ┌──┐
> │MM│
> L└──┘R
> CAPTUR
>
> There are 2 'CAPTURE' columns where I maxed levels.
> 'Input So' is set to 'Stereo M'
Attach the generated file via "alsactl -f somefile store" instead of
ascii art. This contains the all mixer information.
> Play tests all work
> songs="/usr/share/sounds/alsa/Front_Right.wav
> /usr/share/sounds/alsa/Rear_Right.wav
> /usr/share/sounds/alsa/Rear_Left.wav
> /usr/share/sounds/alsa/Rear_Center.wav
> /usr/share/sounds/alsa/Front_Left.wav
> /usr/share/sounds/alsa/Noise.wav
> /usr/share/sounds/alsa/Side_Right.wav
> /usr/share/sounds/alsa/Side_Left.wav
> /usr/share/sounds/alsa/Front_Center.wav"
> echo "not setting hardware"
> for song in $songs;
> do
> aplay $song
> done
>
> arecord -l
> **** List of CAPTURE Hardware Devices ****
> card 0: VT82xx [HDA VIA VT82xx], device 0: VT1708 Analog [VT1708 Analog]
> Subdevices: 2/2
> Subdevice #0: subdevice #0
> Subdevice #1: subdevice #1
> card 0: VT82xx [HDA VIA VT82xx], device 1: VT1708 Digital [VT1708
> Digital]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
>
> One digital device is listed with: arecord -L
> iec958:CARD=VT82xx,DEV=0
> HDA VIA VT82xx, VT1708 Digital
> IEC958 (S/PDIF) Digital Audio Output
> null
> Discard all samples (playback) or generate zero samples (capture)
>
> Arecord without specifying -D makes a pulsing screech.
> arecord -d 10 -f dat -t wav |aplay
>
> This records 10 seconds and ends in an I/O error:
> arecord -D hw:0,1 -d 10 -f dat -t wav |aplay
>
> Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
> Playing WAVE 'stdin' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
> arecord: pcm_read:1324: read error: Input/output error
>
> All these record tests fail.
> arecord -D cards.pcm.Digital -d 10 -f dat -t wav |aplay
> ALSA lib pcm.c:2121:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.Digital
> arecord: main:540: audio open error: No such file or directory
> aplay: playback:1995: read error
>
> arecord -D cards.pcm.iec958 -d 10 -f dat -t wav |aplay
>
> ALSA lib dlmisc.c:118:(snd_dlsym_verify) unable to verify version for symbol _snd_pcm_hook_ctl_elems_install
> ALSA lib pcm_hooks.c:392:(snd_pcm_hook_add_conf) symbol _snd_pcm_hook_ctl_elems_install is not defined inside (null)
> arecord: main:540: audio open error: No such device or address
> aplay: playback:1995: read error
>
> arecord -D hwplug:0,1 -d 10 -f dat -t wav |aplay
>
> ALSA lib pcm.c:2121:(snd_pcm_open_noupdate) Unknown PCM hwplug:0,1
> arecord: main:540: audio open error: No such file or directory
> aplay: playback:1995: read error
It's a user error :) The usage below, -D plug:spdif, is correct,
though.
> arecord -D plug:spdif -d 10 -f dat -t wav |aplay
>
> ALSA lib dlmisc.c:118:(snd_dlsym_verify) unable to verify version for symbol _snd_pcm_hook_ctl_elems_install
OK, this is a bug in the recent alsa-lib.
I fixed it now on HG tree. Please update your alsa-lib repo (maybe
better from hg.alsa-project.org).
Takashi
More information about the Alsa-devel
mailing list