[alsa-devel] ALC268 "test" model

[Takashi Iwai]

At Tue, 8 Jan 2008 10:23:35 +1030 (CST),
Jonathan Woithe wrote:
> 
> Hi
> 
> > > +	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
> > > +	HDA_CODEC_VOLUME("Internal Mic Boost", 0x19, 0, HDA_INPUT),
> > > +	HDA_CODEC_VOLUME("Line In Boost", 0x1a, 0, HDA_INPUT),
> > > +	{ }
> > > +};
> > > +#endif
> > 
> > What's this chunk? ;)
> 
> Another brain fade.  I really must get out of holiday mode.
> 
> Find attached two revised patches against alsa-driver hg snapshot from
> 20080107:
> 
>  * alc260-test-eapd-0.2.diff
> 
>    This implements a switch control for the EAPD signal output by the ALC26x
>    chips.  Since some laptops may utilise this to activate useful things it
>    is handy to have a control for this in the ALC26x test models.  The patch
>    includes the control in the ALC260 test model.
> 
>    Signed-off-by: Jonathan Woithe <jwoithe at physics.adelaide.edu.au>
> 
> 
>  * alc268-test-0.4.diff
> 
>    This implements a test model for the ALC268.  It depends on the feature
>    added by alc260-test-eapd-0.2.diff.  This patch also adds a mention of
>    the ALC260 test model to ALSA-Configuration.txt since this seems to have
>    been missed.
> 
>    Signed-off-by: Jonathan Woithe <jwoithe at physics.adelaide.edu.au>

Applied both patches to HG tree now.  Thanks!


Takashi