[alsa-devel] Random inverted audio channels
Alexandre BOUIN
a.bouin at kerlink.fr
Mon Feb 18 11:00:43 CET 2008
> > We are porting a WM8900 driver from a 8731 one. It fit quite well our
> > requirements and should not be the same as your dev branch.
> > Sincerely, It didn't know you're working on it.
>
> No problem at all - I was just asking from curiosity.
>
> > > The most likely issue here is a DMA underrun but from what you say
> you
> > > may already have ruled that out? It would be helpful if you could
> run
> > > through the debugging you've already done here.
>
> > I had traced the addresses sent into PDC (soc/at91-pcm.c), and are
> always
> > the same.
> > What other traces are you looking for ?
>
> Have you checked to make sure that the PDC is not reporting any errors?
at91_pcm_dma_irq (soc/at91/at91-pcm.c) doesn't reports that there is
underrun or overruns.
I've seen the same swap behavior with codec configured as slave.
More information about the Alsa-devel
mailing list