[alsa-devel] Notebook Toshiba satellite x200-21g with realtek snd-hda-intel audio device still not supported (codec ALC268)

[Daniele (Mastro)]

Daniele (Mastro) ha scritto:
> Takashi Iwai ha scritto:
>> Basically run alsa-info.sh on your problematic configuration you
>> wanted to use.  So, don't pass model option unless you did so in the
>> earlier versions and it ran well.  If you have another better-working
>> configuration, take alsa-info.sh snapshot as well for comparison.
> 
> http://pastebin.ca/901893
> 
> this is with "default" configuration... and it's the best one...
> has this the things you need?
> 

with "default" configuration i mean model=auto
and.. i forgot to raise capture volume:

if i raise the second capture volume (capture 1) i got playback sound 
(even if i disable it) and record is a noisy sound...
if you want i can upload it somewhere

i've retoken the alsa-info
http://pastebin.ca/905273


i've noticed that now on aplay -L i have

default:CARD=Intel
     HDA Intel, ALC268 Analog
     Default Audio Device
front:CARD=Intel,DEV=0
     HDA Intel, ALC268 Analog
     Front speakers
surround40:CARD=Intel,DEV=0
     HDA Intel, ALC268 Analog
     4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
     HDA Intel, ALC268 Analog
     4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
     HDA Intel, ALC268 Analog
     5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
     HDA Intel, ALC268 Analog
     5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
     HDA Intel, ALC268 Analog
     7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
null
     Discard all samples (playback) or generate zero samples (capture)


but if i try to test surround with:
speaker-test -c6 -Dplug:surround51 -t wav -l1

i get:

speaker-test 1.0.15

Playback device is plug:surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
WAV file(s)
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
[....]

i don't know how to test the digital output/input

and i've no "mix, mux or aux" on capture device list (only mic, front 
mic and line)

-- 
Daniele