[alsa-devel] No recording on hda-intel (AD1981HD)

[Ustun ERGENOGLU]

> It looks like this is a generic problem of ATI SB chipset.  Which
> model is it?  SB450, SB460 or SB600?

it is SB450

>
>
> Takashi
>
>
> > 2008/2/12, Takashi Iwai <tiwai at suse.de>:
> > > At Fri, 8 Feb 2008 19:51:39 +0100,
> > > Grzegorz Chwesewicz wrote:
> > > >
> > > > Friday 08 of February 2008 16:57:37 Takashi Iwai napisał(a):
> > > > > At Fri, 08 Feb 2008 13:24:52 +0100,
> > > > >
> > > > > I wrote:
> > > > > > BTW, do you have problems found in below?
> > > > > >   https://bugzilla.novell.com/show_bug.cgi?id=297703
> > > > > >
> > > > > > According to the reporter, nc6400 with AD1981 has a problem with
> > > > > > headphone jack auto-muting and with the non-linear master volume.
> > > > > >
> > > > > > I supplied two test patches there.
> > > > >
> > > > > For convenience, I attach patches here.
> > > >
> > > > Hi, I had no time to test your first patch (this one which check if irq
> > > > handler is called), I've only tested it for a while (working on MSI turned
> > > > on, sometimes hard locks my laptop).
> > > >
> > > > I also have similiar problems with automute, and non-linear master volume
> > > > control.
> > > >
> > > > Without automute patch, automute works from time to time. With your patch
> > > > applied to latest git it works all the time, until the recording breaks. When
> > > > it happens I have sound only in headphones, but not in internal speaker.
> > > > Pluging and unpluging HP doesn't help, only reloading hda-intel fixes
> > > > problem.
> > > > Assuming, your automute patch is ok, but it helps me only until mic breaks.
> > >
> > > OK, this patch is now on HG tree.
> > >
> > > > Without ad1981-hp-master-amp-fix muting (muting=disabling it, not making it's
> > > > value equal 0) "Master" and "PCM" control works ok. Decrementing Master and
> > > > PCM controls to 0 is possible, but after that I can hear very quiet output
> > > > from internal speakers.
> > > > With your patch (ad1981-hp-master-amp-fix) applied to latest git I can't
> > > > decrement Master control to 0 (I can do that with PCM, but behavior is same
> > > > as described upper). I can only decrement it to value 3, and when I press
> > > > down key (in alsamixer) to step to lower level of loudness, it's switching to
> > > > value 103. When Master has 103 value I can hear very quiet output from
> > > > internal speakers and HP (if plugged).
> > >
> > > The patch will change only the behavior of Master control.  PCM should
> > > be as same as before.
> > >
> > > What "value" are you referring in the above context?  Is it a raw
> > > mixer value, percent or dB, or the codec amp value?
> > >
> > > Maybe we need to make clear how the master volume control behaves.
> > > According to the original bug reporter, the master volume behaves like
> > > below:
> > >
> > > - from 0% to 49%
> > >   sounds are still audible, and the volume doesn't change at all
> > > - from 50% to 100%
> > >   sounds get louder normally
> > >
> > > How about yours?
> > >
> > >
> > > Takashi
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel at alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > >
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel at alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>