[alsa-devel] S/PDIF-Out on Asus M3A-H/HDMI with ALC1200]

[Thomas Schneider]

Hi,

here is the output from alsa-info.sh

http://www.alsa-project.org/db/?f=8282910dc807e1f141896886cd5f8fd574117000

I found another small mistake. In the Mixer my Soundcard is shown as 
"Realtek ALC888".
When i switch this to lines in patch_realtek.c then it is shown as 
"Realtek ALC1200".


static struct hda_codec_preset snd_hda_preset_realtek[] = {
......

     { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 },
     { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
       .patch = patch_alc883 },

.....


Thomas

Am 25.12.2008 05:31, schrieb Wu Fengguang:
> Hi Thomas,
>
> Could you provide more information by running
>          http://www.alsa-project.org/alsa-info.sh
>
> I'm particularity interested in the full dmesg and contents of
>          /proc/asound/card?/*\#?
>
> Thanks,
> Fengguang
>
> On Tue, Dec 23, 2008 at 12:22:29PM +0100, Thomas Schneider wrote:
>    
>> Hi,
>>
>> i am looking for a way to make Digital-Audio work with the external
>> and internal S/PDIF-Output of my Motherboard Asus M3A-H/HDMI with
>> ALC1200 Soundard. I use the latest unstable snapshot and i can´t
>> make it work at the same time.
>>
>> On the external S/PDIF-Output is my Digital Receiver connected,
>> on the internal one my GeForce 8500GT to get sound over HDMI
>> on my LCT-TV.
>>
>> When i load the driver without any model-options my Soundcard is
>> detected as Asus P5Q-EM HDMI
>>
>> ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:2716:
>> hda_codec: model 'asus-p5q' is selected for config 1043:82fe (Asus
>> P5Q-EM HDMI)
>> [ 6.721700] ALSA
>> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot
>> find slave Headphone Playback Volume, skipped
>> [ 6.721714] ALSA
>> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot
>> find slave Speaker Playback Volume, skipped
>> [ 6.721716] ALSA
>> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot
>> find slave Mono Playback Volume, skipped
>> [ 6.721719] ALSA
>> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot
>> find slave Line-Out Playback Volume, skipped
>> [ 6.721721] ALSA
>> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot
>> find slave PCM Playback Volume, skipped
>> [ 6.721729] ALSA
>> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot
>> find slave Speaker Playback Switch, skipped
>> [ 6.721731] ALSA
>> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot
>> find slave Mono Playback Switch, skipped
>>
>> Now i have sound on my LCD-TV over HDMI (internal S/PDIF-Out)
>>
>> When i load the driver with model=6stack-dig i have sound on my
>> Digital-Receiver (external S/PDIF-Out).
>>
>> In the mailinglist-archive or in the doku i have seen, that the only
>> difference
>> between this models is the DIGOUT_NID
>>
>> asus-p5q = 0x10
>> 6stack-dig = 0x06
>>
>> I there a way to get both output to work at the same time so i have
>> sound on my LCD-TV and my Digital-Receiver ?
>>
>>
>> Regards
>>
>> Thomas
>> _______________________________________________
>> Alsa-devel mailing list
>> Alsa-devel at alsa-project.org
>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>>      
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>    
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: proc_asound.txt
Url: http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20081225/f2d25383/attachment.txt 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: dmesg_alsa.txt
Url: http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20081225/f2d25383/attachment-0001.txt