[alsa-devel] S/PDIF-Out on Asus M3A-H/HDMI with ALC1200

[Wu Fengguang]

Hi Thomas,

Could you provide more information by running
        http://www.alsa-project.org/alsa-info.sh

I'm particularity interested in the full dmesg and contents of
        /proc/asound/card?/*\#?

Thanks,
Fengguang

On Tue, Dec 23, 2008 at 12:22:29PM +0100, Thomas Schneider wrote:
> Hi,
> 
> i am looking for a way to make Digital-Audio work with the external
> and internal S/PDIF-Output of my Motherboard Asus M3A-H/HDMI with
> ALC1200 Soundard. I use the latest unstable snapshot and i can´t
> make it work at the same time.
> 
> On the external S/PDIF-Output is my Digital Receiver connected,
> on the internal one my GeForce 8500GT to get sound over HDMI
> on my LCT-TV.
> 
> When i load the driver without any model-options my Soundcard is
> detected as Asus P5Q-EM HDMI
> 
> ALSA /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:2716: 
> hda_codec: model 'asus-p5q' is selected for config 1043:82fe (Asus 
> P5Q-EM HDMI)
> [ 6.721700] ALSA 
> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
> find slave Headphone Playback Volume, skipped
> [ 6.721714] ALSA 
> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
> find slave Speaker Playback Volume, skipped
> [ 6.721716] ALSA 
> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
> find slave Mono Playback Volume, skipped
> [ 6.721719] ALSA 
> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
> find slave Line-Out Playback Volume, skipped
> [ 6.721721] ALSA 
> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
> find slave PCM Playback Volume, skipped
> [ 6.721729] ALSA 
> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
> find slave Speaker Playback Switch, skipped
> [ 6.721731] ALSA 
> /usr/local/src/alsa-driver-unstable/pci/hda/hda_codec.c:1339: Cannot 
> find slave Mono Playback Switch, skipped
> 
> Now i have sound on my LCD-TV over HDMI (internal S/PDIF-Out)
> 
> When i load the driver with model=6stack-dig i have sound on my
> Digital-Receiver (external S/PDIF-Out).
> 
> In the mailinglist-archive or in the doku i have seen, that the only 
> difference
> between this models is the DIGOUT_NID
> 
> asus-p5q = 0x10
> 6stack-dig = 0x06
> 
> I there a way to get both output to work at the same time so i have 
> sound on my LCD-TV and my Digital-Receiver ?
> 
> 
> Regards
> 
> Thomas
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel