[alsa-devel] [PATCH 3/4] ASOC: WM8731 codec: add SPI support as well as I2C

[Mark Brown]

On Wed, Aug 27, 2008 at 05:39:27PM +0800, Bryan Wu wrote:

This looks good, thanks but...

> -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
> +#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE) && !defined (CONFIG_SND_SOC_WM8731_SPI)
>  	if (setup->i2c_address) {
>  		normal_i2c[0] = setup->i2c_address;
>  		codec->hw_write = (hw_write_t)i2c_master_send;
> @@ -688,8 +745,14 @@ static int wm8731_probe(struct platform_device *pdev)
>  		if (ret != 0)
>  			printk(KERN_ERR "can't add i2c driver");
>  	}
> +#elif defined (CONFIG_SPI_MASTER) && defined (CONFIG_SND_SOC_WM8731_SPI)
> +	codec->hw_write = (hw_write_t)wm8731_spi_write;
> +	ret = spi_register_driver(&wm8731_spi_driver);
> +	if (ret != 0)
> +		printk(KERN_ERR "can't add spi driver");

...as for the SSM2602 it'd be good if it were possible to build a kernel
which supports both I2C and SPI.  If you like I could do this for you -
there's likely to be merge issues due to the update to the new I2C API
anyway?