[alsa-devel] [PATCH 1/5] soc - Support PXA3xx AC97
Takashi Iwai
tiwai at suse.de
Tue Apr 22 16:11:58 CEST 2008
At Tue, 22 Apr 2008 14:14:35 +0100,
Mark Brown wrote:
>
> The PXA3xx does not support the use of interrupts during reset and access
> to the GPIO status requires similar handling to that for PXA27x.
>
> Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
Applied to HG tree now. Thanks.
Takashi
> ---
> sound/soc/pxa/pxa2xx-ac97.c | 29 +++++++++++++++++++++++++++--
> 1 files changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
> index 815c153..95ae509 100644
> --- a/sound/soc/pxa/pxa2xx-ac97.c
> +++ b/sound/soc/pxa/pxa2xx-ac97.c
> @@ -55,7 +55,7 @@ static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97,
> mutex_lock(&car_mutex);
>
> /* set up primary or secondary codec/modem space */
> -#ifdef CONFIG_PXA27x
> +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
> reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
> #else
> if (reg == AC97_GPIO_STATUS)
> @@ -105,7 +105,7 @@ static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
> mutex_lock(&car_mutex);
>
> /* set up primary or secondary codec/modem space */
> -#ifdef CONFIG_PXA27x
> +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
> reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
> #else
> if (reg == AC97_GPIO_STATUS)
> @@ -128,6 +128,9 @@ static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
>
> static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
> {
> +#ifdef CONFIG_PXA3xx
> + int timeout = 100;
> +#endif
> gsr_bits = 0;
>
> #ifdef CONFIG_PXA27x
> @@ -138,6 +141,11 @@ static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
> GCR |= GCR_WARM_RST;
> pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
> udelay(500);
> +#elif defined(CONFIG_PXA3xx)
> + /* Can't use interrupts */
> + GCR |= GCR_WARM_RST;
> + while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
> + mdelay(1);
> #else
> GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
> wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
> @@ -153,6 +161,16 @@ static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
>
> static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
> {
> +#ifdef CONFIG_PXA3xx
> + int timeout = 1000;
> +
> + /* Hold CLKBPB for 100us */
> + GCR = 0;
> + GCR = GCR_CLKBPB;
> + udelay(100);
> + GCR = 0;
> +#endif
> +
> GCR &= GCR_COLD_RST; /* clear everything but nCRST */
> GCR &= ~GCR_COLD_RST; /* then assert nCRST */
>
> @@ -164,6 +182,13 @@ static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
> pxa_set_cken(CKEN_AC97CONF, 0);
> GCR = GCR_COLD_RST;
> udelay(50);
> +#elif defined(CONFIG_PXA3xx)
> + /* Can't use interrupts on PXA3xx */
> + GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
> +
> + GCR = GCR_WARM_RST | GCR_COLD_RST;
> + while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
> + mdelay(10);
> #else
> GCR = GCR_COLD_RST;
> GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
> --
> 1.5.5
>
More information about the Alsa-devel
mailing list