[alsa-devel] [PATCH] opti931: additional check for OPL3 device

[Rene Herman]

On 09/17/2007 02:26 PM, Krzysztof Helt wrote:

> Look at the code. Shifting the fm_port address by 8 (Rene's) is correct
> way to do as the OPL3 is searched at fm_port and fm_port +2, but the OPL4
> is searched at fm_port and fm_port -8 (which will be the fm_port before
> shifting).

Ah, damn, crap. Yes, forget the version I just sent. Original (attached) was 
correct. Thanks for paying attention.

> Is the OPL4 located at 0x380 and 0x388 or 0x378 and 0x380? If the former,
> the Rene's patch is correct.

The OPL4 is at 0x380, with its OPL3 compatible part at 0x388. Could you add 
an Acked-by?

===
opti9xx: adjust OPL3 FM resource value

The OPTi ISA-PnP chips advertise their OPL4 base at 0x380 (to 0x3f0) through 
  pnp and put their on-chip OPL3 at +8. The driver assumes the provided 
value is the ALBase (OPL3 address) though and checks for an OPL4 at -8, 
which means that simply adding 8 to the pnp provides value works to fix 
detection of both OPL3 and OPL4.

Problem spotted on 931 and 933 by Krzysztof Helt and confirmed on 924 and 
925 (together all OPTi ISA-PnP chips) by me.

Signed-off-by; Rene Herman <rene.herman at gmail.com>
===

Rene.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: opti9xx-fm_port.diff
Url: http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20070917/2f5fe8d2/attachment-0001.bat