[alsa-devel] [PATCH] Gallant SC-6000 driver (4th version)
Krzysztof Helt
krzysztof.h1 at wp.pl
Wed Sep 5 22:25:41 CEST 2007
From: Krzysztof Helt <krzysztof.h1 at wp.pl>
This is port of the Gallant SC-6000 driver from the OSS aedsp16 driver.
This card was also sold as AudioExcel DSP 16 and Zoltrix AV302 (Audio Plus True 16).
Signed-off-by: Krzysztof Helt <krzysztof.h1 at wp.pl>
---
This version fixes most of issues pointed by Rene Herman. Thank Clemens,
Takashi and Rene who contributed to this work.
I have left the ISA autodetection. It makes driver usage simpler for user.
The base port, mpu port and mss port can be read from jumper settings,
but irq or dma is not settable. A system may figure out which one is free
and use it.
I post this driver despite my question if it can be integrated into the sgalaxy driver.
I think that I can post it and see if it work for people and maybe contact
someone with SC-6600 model so the driver can be extended to handle this
chip also. It would replace the OSS driver completely then.
I am getting feeling that ad1848 and cs4231 libraries could be merged (or at least
produce some common part like mss_lib). This may allow to merge drivers using
cs4231-lib and ad1848-lib. I'll look into this (I do not have the CS4231 based card
but I should have it next week - Sound Galaxy Waverider).
Regards,
Krzysztof
diff -urpN linux-2.6.22.old/sound/isa/Kconfig linux-2.6.22/sound/isa/Kconfig
--- linux-2.6.22.old/sound/isa/Kconfig 2007-08-28 23:14:08.000000000 +0200
+++ linux-2.6.22/sound/isa/Kconfig 2007-09-01 18:38:41.000000000 +0200
@@ -191,6 +191,19 @@ config SND_ES18XX
To compile this driver as a module, choose M here: the module
will be called snd-es18xx.
+config SND_SC6000
+ tristate "Gallant SC-6000, Audio Excel DSP 16"
+ depends on SND
+ select SND_AD1848_LIB
+ select SND_OPL3_LIB
+ select SND_MPU401_UART
+ help
+ Say Y here to include support for Gallant SC-6000 card and clones:
+ Audio Excel DSP 16 and Zoltrix AV302.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-sc6000.
+
config SND_GUS_SYNTH
tristate
diff -urpN linux-2.6.22.old/sound/isa/Makefile linux-2.6.22/sound/isa/Makefile
--- linux-2.6.22.old/sound/isa/Makefile 2007-07-09 01:32:17.000000000 +0200
+++ linux-2.6.22/sound/isa/Makefile 2007-09-03 22:09:58.000000000 +0200
@@ -10,6 +10,7 @@ snd-cmi8330-objs := cmi8330.o
snd-dt019x-objs := dt019x.o
snd-es18xx-objs := es18xx.o
snd-opl3sa2-objs := opl3sa2.o
+snd-sc6000-objs := sc6000.o
snd-sgalaxy-objs := sgalaxy.o
snd-sscape-objs := sscape.o
@@ -21,6 +22,7 @@ obj-$(CONFIG_SND_CMI8330) += snd-cmi8330
obj-$(CONFIG_SND_DT019X) += snd-dt019x.o
obj-$(CONFIG_SND_ES18XX) += snd-es18xx.o
obj-$(CONFIG_SND_OPL3SA2) += snd-opl3sa2.o
+obj-$(CONFIG_SND_SC6000) += snd-sc6000.o
obj-$(CONFIG_SND_SGALAXY) += snd-sgalaxy.o
obj-$(CONFIG_SND_SSCAPE) += snd-sscape.o
diff -urpN linux-2.6.22.old/sound/isa/sc6000.c linux-2.6.22/sound/isa/sc6000.c
--- linux-2.6.22.old/sound/isa/sc6000.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.22/sound/isa/sc6000.c 2007-09-05 21:14:45.000000000 +0200
@@ -0,0 +1,630 @@
+/*
+ * Driver for Gallant SC-6000 soundcard. This card is also known as
+ * Audio Excel DSP 16 or Zoltrix AV302.
+ * These cards use CompuMedia ASC-9308 chip + AD1848 codec.
+ *
+ * Copyright (C) 2007 Krzysztof Helt <krzysztof.h1 at wp.pl>
+ *
+ * I don't have documentation for this card. I used the driver
+ * for OSS/Free included in the kernel source as reference.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <sound/driver.h>
+#include <linux/module.h>
+#include <linux/isa.h>
+#include <asm/dma.h>
+#include <sound/core.h>
+#include <sound/ad1848.h>
+#include <sound/opl3.h>
+#include <sound/mpu401.h>
+#include <sound/control.h>
+#define SNDRV_LEGACY_FIND_FREE_IRQ
+#define SNDRV_LEGACY_FIND_FREE_DMA
+#include <sound/initval.h>
+
+MODULE_AUTHOR("Krzysztof Helt");
+MODULE_DESCRIPTION("Gallant SC-6000");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Gallant, SC-6000},"
+ "{AudioExcel, Audio Excel DSP 16},"
+ "{Zoltrix, AV302}}");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
+static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220, 0x240 */
+static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5, 7, 9, 10, 11 */
+static long mss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x530, 0xe80 */
+static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+ /* 0x300, 0x310, 0x320, 0x330 */
+static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5, 7, 9, 10, 0 */
+static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 0, 1, 3 */
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for sc-6000 based soundcard.");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for sc-6000 based soundcard.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable sc-6000 based soundcard.");
+module_param_array(port, long, NULL, 0444);
+MODULE_PARM_DESC(port, "Port # for sc-6000 driver.");
+module_param_array(mss_port, long, NULL, 0444);
+MODULE_PARM_DESC(mss_port, "MSS Port # for sc-6000 driver.");
+module_param_array(mpu_port, long, NULL, 0444);
+MODULE_PARM_DESC(mpu_port, "MPU-401 port # for sc-6000 driver.");
+module_param_array(irq, int, NULL, 0444);
+MODULE_PARM_DESC(irq, "IRQ # for sc-6000 driver.");
+module_param_array(mpu_irq, int, NULL, 0444);
+MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver.");
+module_param_array(dma, int, NULL, 0444);
+MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver.");
+
+/*
+ * Commands of SC6000's DSP (SBPRO+special).
+ * Some of them are COMMAND_xx, in the future they may change.
+ */
+#define WRITE_MDIRQ_CFG 0x50 /* Set M&I&DRQ mask (the real config) */
+#define COMMAND_52 0x52 /* */
+#define READ_HARD_CFG 0x58 /* Read Hardware Config (I/O base etc) */
+#define COMMAND_5C 0x5c /* */
+#define COMMAND_60 0x60 /* */
+#define COMMAND_66 0x66 /* */
+#define COMMAND_6C 0x6c /* */
+#define COMMAND_6E 0x6e /* */
+#define COMMAND_88 0x88 /* Unknown command */
+#define DSP_INIT_MSS 0x8c /* Enable Microsoft Sound System mode */
+#define COMMAND_C5 0xc5 /* */
+#define GET_DSP_VERSION 0xe1 /* Get DSP Version */
+#define GET_DSP_COPYRIGHT 0xe3 /* Get DSP Copyright */
+
+/*
+ * Offsets of SC6000 DSP I/O ports. The offset is added to base I/O port
+ * to have the actual I/O port.
+ * Register permissions are:
+ * (wo) == Write Only
+ * (ro) == Read Only
+ * (w-) == Write
+ * (r-) == Read
+ */
+#define DSP_RESET 0x06 /* offset of DSP RESET (wo) */
+#define DSP_READ 0x0a /* offset of DSP READ (ro) */
+#define DSP_WRITE 0x0c /* offset of DSP WRITE (w-) */
+#define DSP_COMMAND 0x0c /* offset of DSP COMMAND (w-) */
+#define DSP_STATUS 0x0c /* offset of DSP STATUS (r-) */
+#define DSP_DATAVAIL 0x0e /* offset of DSP DATA AVAILABLE (ro) */
+
+#define PFX "sc6000: "
+
+/* hardware dependent functions */
+
+/*
+ * sc6000_irq_to_softcfg - Decode irq number into cfg code.
+ */
+static __devinit unsigned char sc6000_irq_to_softcfg(int irq)
+{
+ unsigned char val = 0;
+
+ switch (irq) {
+ case 5:
+ val = 0x28;
+ break;
+ case 7:
+ val = 0x8;
+ break;
+ case 9:
+ val = 0x10;
+ break;
+ case 10:
+ val = 0x18;
+ break;
+ case 11:
+ val = 0x20;
+ break;
+ default:
+ break;
+ }
+ return val;
+}
+
+/*
+ * sc6000_dma_to_softcfg - Decode dma number into cfg code.
+ */
+static __devinit unsigned char sc6000_dma_to_softcfg(int dma)
+{
+ unsigned char val = 0;
+
+ switch (dma) {
+ case 0:
+ val = 1;
+ break;
+ case 1:
+ val = 2;
+ break;
+ case 3:
+ val = 3;
+ break;
+ default:
+ break;
+ }
+ return val;
+}
+
+/*
+ * sc6000_mpu_irq_to_softcfg - Decode MPU-401 irq number into cfg code.
+ */
+static __devinit unsigned char sc6000_mpu_irq_to_softcfg(int mpu_irq)
+{
+ unsigned char val = 0;
+
+ switch (mpu_irq) {
+ case 5:
+ val = 4;
+ break;
+ case 7:
+ val = 0x44;
+ break;
+ case 9:
+ val = 0x84;
+ break;
+ case 10:
+ val = 0xc4;
+ break;
+ default:
+ break;
+ }
+ return val;
+}
+
+static __devinit int sc6000_wait_data(int port)
+{
+ int loop = 1000;
+ unsigned char val = 0;
+
+ do {
+ val = inb(port + DSP_DATAVAIL);
+ if (val & 0x80)
+ return 0;
+ cpu_relax();
+ } while (loop--);
+
+ return -EAGAIN;
+}
+
+static __devinit int sc6000_read(int port)
+{
+ if (sc6000_wait_data(port))
+ return -EBUSY;
+
+ return inb(port + DSP_READ);
+
+}
+
+static __devinit int sc6000_write(int port, int cmd)
+{
+ unsigned char val;
+ int loop = 500000;
+
+ do {
+ val = inb(port + DSP_STATUS);
+ /*
+ * DSP ready to receive data if bit 7 of val == 0
+ */
+ if (!(val & 0x80)) {
+ outb(cmd, port + DSP_COMMAND);
+ return 0;
+ }
+ cpu_relax();
+ } while (loop--);
+
+ snd_printk(KERN_ERR "DSP Command (0x%x) timeout.\n", cmd);
+
+ return -EAGAIN;
+}
+
+static int __devinit sc6000_dsp_get_answer(int port, int command, char *data,
+ int data_len)
+{
+ int len = 0;
+
+ if (sc6000_write(port, command)) {
+ snd_printk(KERN_ERR "CMD 0x%x: failed!\n", command);
+ return -EFAULT;
+ }
+
+ do {
+ int val = sc6000_read(port);
+
+ if (val < 0)
+ break;
+
+ data[len++] = val;
+
+ } while (len < data_len);
+
+ /*
+ * If no more data available, return to the caller, no error if len>0.
+ * We have no other way to know when the string is finished.
+ */
+ return len ? len : -EIO;
+}
+
+static int __devinit sc6000_dsp_reset(int port)
+{
+ outb(1, port + DSP_RESET);
+ udelay(10);
+ outb(0, port + DSP_RESET);
+ udelay(20);
+ if (sc6000_read(port) == 0xaa)
+ return 0;
+ return -EBUSY;
+}
+
+/* detection and initialization */
+static int __devinit sc6000_cfg_write(int port, unsigned char softcfg)
+{
+
+ if (sc6000_write(port, WRITE_MDIRQ_CFG)) {
+ snd_printk(KERN_ERR "CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
+ return -EIO;
+ }
+ if (sc6000_write(port, softcfg)) {
+ snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+static int __devinit sc6000_setup_board(int port, int config)
+{
+ int loop = 10;
+
+ do {
+ if (sc6000_write(port, COMMAND_88)) {
+ snd_printk(KERN_ERR "CMD 0x%x: failed!\n",
+ COMMAND_88);
+ return -EIO;
+ }
+ } while ((sc6000_wait_data(port) < 0) && loop--);
+
+ if (sc6000_read(port) < 0) {
+ snd_printk(KERN_ERR "sc6000_read after CMD 0x%x: failed\n",
+ COMMAND_88);
+ return -EIO;
+ }
+
+ if (sc6000_cfg_write(port, config))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int __devinit sc6000_init_mss(int port, int config, int mss_port,
+ int mss_config)
+{
+ if (sc6000_write(port, DSP_INIT_MSS)) {
+ snd_printk(KERN_ERR "sc6000_init_mss [0x%x]: failed!\n",
+ DSP_INIT_MSS);
+ return -EIO;
+ }
+
+ msleep(10);
+
+ if (sc6000_cfg_write(port, config))
+ return -EIO;
+
+ outb(mss_config, mss_port);
+
+ return 0;
+}
+
+static int __devinit sc6000_init_board(int port, int irq, int dma,
+ int mss_port, int mpu_irq)
+{
+ char answer[15];
+ char version[2];
+ int mss_config = sc6000_irq_to_softcfg(irq) |
+ sc6000_dma_to_softcfg(dma);
+ int config = mss_config |
+ sc6000_mpu_irq_to_softcfg(mpu_irq);
+
+ if (sc6000_dsp_reset(port)) {
+ snd_printk(KERN_ERR "sc6000_dsp_reset: failed!\n");
+ return -EBUSY;
+ }
+
+ if (sc6000_dsp_get_answer(port, GET_DSP_COPYRIGHT, answer, 15) <= 0) {
+ snd_printk(KERN_ERR "sc6000_dsp_copyright: failed!\n");
+ return -ENODEV;
+ }
+ /*
+ * My SC-6000 card return "SC-6000" in DSPCopyright, so
+ * if we have something different, we have to be warned.
+ * Mine returns SC-6000A - KH
+ */
+ if (strncmp("SC-6000", answer, 7))
+ snd_printk(KERN_WARNING "Warning: non SC-6000 audio card!\n");
+
+ if (sc6000_dsp_get_answer(port, GET_DSP_VERSION, version, 2) < 2) {
+ snd_printk(KERN_ERR "sc6000_dsp_version: failed!\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO PFX "Detected model: %s, DSP version %d.%d\n",
+ answer, version[0], version[1]);
+
+ /*
+ * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
+ */
+ if (sc6000_cfg_write(port, 0x0a)) {
+ snd_printk(KERN_ERR "sc6000_cfg_write: failed!\n");
+ return -EFAULT;
+ }
+
+ if (sc6000_setup_board(port, config) < 0) {
+ snd_printk(KERN_ERR "sc6000_setup_board: failed!\n");
+ return -ENODEV;
+ }
+
+ if (sc6000_init_mss(port, config, mss_port,
+ mss_config) < 0) {
+ snd_printk(KERN_ERR "Can not initialize"
+ "Microsoft Sound System mode.\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int __devinit snd_sc6000_detect(int dev, int irq, int dma)
+{
+ int err = -ENODEV;
+
+ snd_printd("Initializing BASE[0x%lx] IRQ[%d] DMA[%d] MIRQ[%d]\n",
+ port[dev], irq, dma,
+ mpu_irq[dev] == SND_AUTO_IRQ ? 0 : mpu_irq[dev]);
+
+/*
+ * We must request the port region because these are the I/O
+ * ports to access card's control registers.
+ */
+ if (!request_region(port[dev], 0x10, "sc-6000 (base)")) {
+ snd_printk(KERN_ERR
+ "SC-6000 port I/O port region is already in use.\n");
+ return -EBUSY;
+ }
+
+ err = sc6000_init_board(port[dev], irq, dma,
+ mss_port[dev], mpu_irq[dev]);
+
+ return err;
+}
+
+static int __devinit snd_sc6000_mixer(struct snd_ad1848 *chip)
+{
+ struct snd_card *card = chip->card;
+ struct snd_ctl_elem_id id1, id2;
+ int err;
+
+ memset(&id1, 0, sizeof(id1));
+ memset(&id2, 0, sizeof(id2));
+ id1.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ id2.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ /* reassign AUX0 to FM */
+ strcpy(id1.name, "Aux Playback Switch");
+ strcpy(id2.name, "FM Playback Switch");
+ err = snd_ctl_rename_id(card, &id1, &id2);
+ if (err < 0)
+ return err;
+ strcpy(id1.name, "Aux Playback Volume");
+ strcpy(id2.name, "FM Playback Volume");
+ err = snd_ctl_rename_id(card, &id1, &id2);
+ if (err < 0)
+ return err;
+ /* reassign AUX1 to CD */
+ strcpy(id1.name, "Aux Playback Switch"); id1.index = 1;
+ strcpy(id2.name, "CD Playback Switch");
+ err = snd_ctl_rename_id(card, &id1, &id2);
+ if (err < 0)
+ return err;
+ strcpy(id1.name, "Aux Playback Volume");
+ strcpy(id2.name, "CD Playback Volume");
+ err = snd_ctl_rename_id(card, &id1, &id2);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static int __devinit snd_sc6000_match(struct device *devptr, unsigned int dev)
+{
+ if (!enable[dev])
+ return 0;
+ if (port[dev] == SNDRV_AUTO_PORT) {
+ printk(KERN_ERR PFX "specify IO port\n");
+ return 0;
+ }
+ if (mss_port[dev] == SNDRV_AUTO_PORT) {
+ printk(KERN_ERR PFX "specify MSS port\n");
+ return 0;
+ }
+ if (port[dev] != 0x220 && port[dev] != 0x240) {
+ printk(KERN_ERR PFX "Port must be 0x220 or 0x240\n");
+ return 0;
+ }
+ if (mss_port[dev] != 0x530 && mss_port[dev] != 0xe80) {
+ printk(KERN_ERR PFX "MSS port must be 0x530 or 0xe80\n");
+ return 0;
+ }
+ if (irq[dev] != SNDRV_AUTO_IRQ && !sc6000_irq_to_softcfg(irq[dev])) {
+ printk(KERN_ERR PFX "invalid IRQ %d\n", irq[dev]);
+ return 0;
+ }
+ if (dma[dev] != SNDRV_AUTO_DMA && !sc6000_dma_to_softcfg(dma[dev])) {
+ printk(KERN_ERR PFX "invalid DMA %d\n", dma[dev]);
+ return 0;
+ }
+ if (mpu_port[dev] != SNDRV_AUTO_PORT &&
+ (mpu_port[dev] & ~0x30L) != 0x300) {
+ printk(KERN_ERR PFX "invalid MPU-401 port %lx\n",
+ mpu_port[dev]);
+ return 0;
+ }
+ if (mpu_port[dev] != SNDRV_AUTO_PORT &&
+ mpu_irq[dev] != SNDRV_AUTO_IRQ && mpu_irq[dev] != 0 &&
+ !sc6000_mpu_irq_to_softcfg(mpu_irq[dev])) {
+ printk(KERN_ERR PFX "invalid MPU-401 IRQ %d\n", mpu_irq[dev]);
+ return 0;
+ }
+ return 1;
+}
+
+static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
+{
+ static int possible_irqs[] = { 5, 7, 9, 10, 11, -1 };
+ static int possible_dmas[] = { 1, 3, 0, -1 };
+ int err;
+ int xirq = irq[dev];
+ int xdma = dma[dev];
+ struct snd_card *card;
+ struct snd_ad1848 *chip;
+ struct snd_opl3 *opl3;
+
+ card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+ if (!card)
+ return -ENOMEM;
+
+ if (xirq == SNDRV_AUTO_IRQ) {
+ xirq = snd_legacy_find_free_irq(possible_irqs);
+ if (xirq < 0) {
+ snd_printk(KERN_ERR "unable to find a free IRQ\n");
+ err = -EBUSY;
+ goto _err;
+ }
+ }
+
+ if (xdma == SNDRV_AUTO_DMA) {
+ xdma = snd_legacy_find_free_dma(possible_dmas);
+ if (xdma < 0) {
+ snd_printk(KERN_ERR "unable to find a free DMA\n");
+ err = -EBUSY;
+ goto _err;
+ }
+ }
+
+ err = snd_sc6000_detect(dev, xirq, xdma);
+ if (err < 0)
+ goto _err;
+
+ err = snd_ad1848_create(card, mss_port[dev] + 4, xirq, xdma,
+ AD1848_HW_DETECT, &chip);
+ if (err < 0)
+ goto _err;
+ card->private_data = chip;
+
+ err = snd_ad1848_pcm(chip, 0, NULL);
+ if (err < 0) {
+ snd_printk(KERN_ERR
+ "error creating new ad1848 PCM device\n");
+ goto _err;
+ }
+ err = snd_ad1848_mixer(chip);
+ if (err < 0) {
+ snd_printk(KERN_ERR "error creating new ad1848 mixer\n");
+ goto _err;
+ }
+ err = snd_sc6000_mixer(chip);
+ if (err < 0) {
+ snd_printk(KERN_ERR "the mixer rewrite failed\n");
+ goto _err;
+ }
+ if (snd_opl3_create(card,
+ 0x388, 0x388 + 2,
+ OPL3_HW_AUTO, 0, &opl3) < 0) {
+ snd_printk(KERN_ERR "no OPL device at 0x%x-0x%x ?\n",
+ 0x388, 0x388 + 2);
+ } else {
+ err = snd_opl3_timer_new(opl3, 0, 1);
+ if (err < 0)
+ goto _err;
+
+ err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
+ if (err < 0)
+ goto _err;
+ }
+
+ if (mpu_port[dev] != SNDRV_AUTO_PORT) {
+ if (mpu_irq[dev] == SNDRV_AUTO_IRQ)
+ mpu_irq[dev] = -1;
+ if (snd_mpu401_uart_new(card, 0,
+ MPU401_HW_MPU401,
+ mpu_port[dev], 0,
+ mpu_irq[dev],
+ mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
+ NULL) < 0)
+ snd_printk(KERN_ERR "no MPU-401 device at 0x%lx ?\n",
+ mpu_port[dev]);
+ }
+
+ strcpy(card->driver, "Gallant SC-6000");
+ strcpy(card->shortname, "Gallant SC-6000");
+ sprintf(card->longname, "Gallant SC-6000 at 0x%lx, irq %d, dma %d",
+ mss_port[dev], xirq, xdma);
+
+ snd_card_set_dev(card, devptr);
+
+ err = snd_card_register(card);
+ if (err < 0)
+ goto _err;
+
+ dev_set_drvdata(devptr, card);
+ return 0;
+
+ _err:
+ snd_card_free(card);
+ return err;
+}
+
+static int __devexit snd_sc6000_remove(struct device *devptr, unsigned int dev)
+{
+ release_region(port[dev], 0x10);
+
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
+ return 0;
+}
+
+static struct isa_driver snd_sc6000_driver = {
+ .match = snd_sc6000_match,
+ .probe = snd_sc6000_probe,
+ .remove = __devexit_p(snd_sc6000_remove),
+ /* FIXME: suspend/resume */
+ .driver = {
+ .name = "sc6000",
+ },
+};
+
+
+static int __init alsa_card_sc6000_init(void)
+{
+ return isa_register_driver(&snd_sc6000_driver, SNDRV_CARDS);
+}
+
+static void __exit alsa_card_sc6000_exit(void)
+{
+ isa_unregister_driver(&snd_sc6000_driver);
+}
+
+module_init(alsa_card_sc6000_init)
+module_exit(alsa_card_sc6000_exit)
More information about the Alsa-devel
mailing list