[alsa-devel] [PATCH] stac9200 eapd fixes
Takashi Iwai
tiwai at suse.de
Wed Oct 10 10:08:38 CEST 2007
At Tue, 9 Oct 2007 22:18:00 -0400,
Brian Hinz wrote:
>
>
> Hi Takashi,
>
> Your updated version works fine with hg clone from tonight.
>
> Thanks,
> -brian
Great. I committed the patch right now to HG tree.
Thanks for quick reaction!
Takashi
>
>
> At Wed, 26 Sep 2007 21:39:47 -0400,
> Brian Hinz wrote:
> >
> > Hi,
> >
> > The following patch addresses alsa bug #0002948 and it's (many) duplicates.
> > Please consider it for inclusion in the next release.
>
> Thanks for the patch! It's been a real PITA.
>
> >
> > Thanks,
> > -brian
> >
> > --- alsa-kernel/pci/hda/hda_codec.c 2007-09-24 21:46:11.000000000 -0400
> > +++ alsa-kernel/pci/hda/hda_codec.c 2007-09-24 22:00:15.000000000 -0400
> > @@ -1629,11 +1629,30 @@
> > power_state);
> >
> > nid = codec->start_nid;
> > + unsigned int pincap;
> > for (i = 0; i < codec->num_nodes; i++, nid++) {
> > - if (get_wcaps(codec, nid) & AC_WCAP_POWER)
> > - snd_hda_codec_write(codec, nid, 0,
> > + if (get_wcaps(codec, nid) & AC_WCAP_POWER) {
> > + pincap = snd_hda_param_read(codec, nid,
> > + AC_PAR_PIN_CAP);
> > + /*
> > + * don't power down the widget if it controls eapd
> > + * and EAPD_BTLENABLE is set.
> > + */
> > + if (pincap & AC_PINCAP_EAPD) {
> > + int eapd = snd_hda_codec_read(codec, nid,
> > + 0, AC_VERB_GET_EAPD_BTLENABLE, 0);
> > + eapd &= 0x02;
> > + if (power_state != AC_PWRST_D3 || !eapd) {
> > + snd_hda_codec_write(codec, nid, 0,
> > + AC_VERB_SET_POWER_STATE,
> > + power_state);
> > + }
> > + } else {
> > + snd_hda_codec_write(codec, nid, 0,
> > AC_VERB_SET_POWER_STATE,
> > power_state);
> > + }
> > + }
> > }
> >
> > if (power_state == AC_PWRST_D0) {
>
> Hm, I'm not 100% sure whether this check is always needed for every
> pin with EAPD capability. But, surely, stopping the power-down
> doesn't hurt much but a slight power-loss. Let's add it.
>
>
> > --- alsa-kernel/pci/hda/patch_sigmatel.c 2007-09-24 21:46:12.000000000 -0400
> > +++ alsa-kernel/pci/hda/patch_sigmatel.c 2007-09-26 20:57:55.000000000 -0400
> > @@ -378,6 +378,13 @@
> > {}
> > };
> >
> > +static struct hda_verb stac9200_eapd_init[] = {
> > + /* set dac0mux for dac converter */
> > + { 0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
> > + { 0x08, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
> > + {}
> > +};
> > +
> > static struct hda_verb stac925x_core_init[] = {
> > /* set dac0mux for dac converter */
> > { 0x06, AC_VERB_SET_CONNECT_SEL, 0x00},
> > @@ -2492,7 +2499,23 @@
> > spec->num_dmics = 0;
> > spec->num_adcs = 1;
> >
> > - spec->init = stac9200_core_init;
> > + /*
> > + * EAPD needs to be set on resume
> > + */
> > + switch (codec->subsystem_id) {
> > + case 0x107b0205: /* Gateway S-7110M */
> > + spec->init = stac9200_eapd_init;
> > + break;
> > + case 0x107b0317: /* Gateway MT3423, MX3412, MX3410, MX3414 */
> > + spec->init = stac9200_eapd_init;
> > + break;
> > + case 0x107b0318: /* Gateway ML3109, MT3707 */
> > + spec->init = stac9200_eapd_init;
> > + break;
> > + default:
> > + spec->init = stac9200_core_init;
> > + break;
> > + }
> > spec->mixer = stac9200_mixer;
> >
> > err = stac9200_parse_auto_config(codec);
>
> I prefer a new model, e.g. STAC9200_GATEWAY, instead of checking each
> SSID there. Then you'll be able to add a quirk dynamically via model
> module option if any model is missing in the table.
>
>
> Could you check whether the patch below works? I rewrote
> hda_set_power_state() changes slightly, too. After confirming it
> works, I'd love to push it before 1.0.15 release.
>
>
> thanks,
>
> Takashi
>
More information about the Alsa-devel
mailing list