[alsa-devel] rme multiface I=>pccard error -12

rmgls at free.fr rmgls at free.fr
Fri Nov 30 15:11:08 CET 2007


Hello,

on a laptop the old multiface I with a pccard (1) doesn't attach.
acore returns error -12.

      details:
dmesg:
pccard: CardBus card inserted into slot 0
ALSA /root/alsa-driver-hg20071129/acore/init.c:174: cannot find the slot for index 0 (range 0-0), error: -16
RME Hammerfall DSP: probe of 0000:07:00.0 failed with error -12
    	       config:
machine: sony vaio s5
kernel 2-6-24-rc3
all alsa-*-hg as you seen.
sound box: multiface I and pccard (I), the old one.

Socket 0 Bridge:   	[yenta_cardbus] 	(bus ID: 0000:06:05.0)

lspcmcia:
Configuration:	state: on	ready: yes
Voltage: 3.3V Vcc: 3.3V Vpp: 3.3V

lspci -v
06:05.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
	Subsystem: Sony Corporation Unknown device 818f
	Flags: bus master, medium devsel, latency 168, IRQ 17
	Memory at b0008000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
	Memory window 0: 50000000-53fff000 (prefetchable)
	Memory window 1: 54000000-57fff000
	I/O window 0: 00002400-000024ff
	I/O window 1: 00002800-000028ff
	16-bit legacy interface ports at 0001
07:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 10)
	Flags: medium devsel, IRQ 17
	Memory at 54000000 (32-bit, non-prefetchable) [disabled] [size=64K]

cat /dev/sndstat:
...
0: alc-260

any help would be appreciated.
thanks.

best regards
raoul
rmgls at free.fr


More information about the Alsa-devel mailing list