[alsa-devel] Can someone verify support for "AzTech Sound Galaxy Nova 16 Extra II-3D - using AZT-2316/R Chipset - FCC-ID:I38-MMSN846" ?

[ramkromberg at mail.com]

Since the only successful modprobe is done with the jumper on SOFTWARE
instead of EPPROM, I'll only tested the following:

Jumper: Software:

sudo modprobe snd-sb8 port=0x220 irq=5 dma8=1
without an error,
dmesg - gives no hint, verbose, mention...

cat /proc/asound/cards:
 0 [Pro            ]: SB Pro - Sound Blaster Pro
Sound Blaster Pro at 0x220, irq 5, dma 1

So I did the following:
cd /proc/asound/
cat *

cat: Pro: Is a directory
cat: card0: Is a directory
 0 [Pro            ]: SB Pro - Sound Blaster Pro
Sound Blaster Pro at 0x220, irq 5, dma 1
2:        : timer
3:        : sequencer
4: [ 0- 0]: raw midi
5: [ 0- 0]: hardware dependent
6: [ 0- 0]: digital audio playback
7: [ 0- 0]: digital audio capture
8: [ 0]   : control
00-00: OPL3 FM
 0 snd_sb8
cat: oss: Is a directory
00-00: SB8 DSP : DSP v3.1 : playback 1 : capture 1
cat: seq: Is a directory
G0: system timer : 4000.000us (10000000 ticks)
P0-0-0: PCM playback 0-0-0 : SLAVE
P0-0-1: PCM capture 0-0-1 : SLAVE
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09
09:56:17 2007 UTC).

Thanks for your help,
Ram Kromberg,
ramkromberg at mail.com