[alsa-devel] [HDA Intel/STAC92xx] Alsa 1.0.14: error in stac92xx_auto_fill_dac_nid
Jan de Mooij
jandemooij at gmail.com
Sat Jun 30 15:26:16 CEST 2007
I recompiled alsa-driver with --with-debug=full, and I attached the
files you asked for. In the dmesg file, alsa output starts on line
453.
Thanks for your help. Please let me know if you need more information.
Jan
On 6/30/07, Takashi Iwai <tiwai at suse.de> wrote:
> At Thu, 28 Jun 2007 16:22:22 +0200,
> Jan de Mooij wrote:
> >
> > I have a strange problem with alsa on Ubuntu Gutsy. If I compile and
> > install the Alsa 1.0.14 driver, my sound card is not detected, and
> > sound doesn't work. I also get the following message in dmesg:
> >
> > [ 33.360190] stac92xx_auto_fill_dac_nids: No available DAC for pin 0x15
> >
> > So the problem seems to be in the stac92xx_auto_fill_dac_nids
> > function. When I copy that function from alsa 1.0.13 into the 1.0.14
> > source, everything works okay...
> >
> > It looks like the function is rewritten for version 1.0.14, but for me
> > it does not work anymore. I have to do the above steps with each new
> > kernel update in Ubuntu Gutsy... Therefore I would like to fix it, but
> > I don't know where to start.
>
> Attach the contents of /proc/asound/card0/codec#* for further
> analysis. Also, check the earlier kernel message, especially the
> auto-pin configuration (make sure that you build the driver with
> --with-debug=full option).
>
>
> thanks,
>
> Takashi
>
-------------- next part --------------
[ 668.752520] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 686.471015] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 686.471047] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 686.745189] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2339: autoconfig: line_outs=3 (0xd/0xc/0xf/0x0/0x0)
[ 686.745198] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2343: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 686.745207] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2347: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 686.745213] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2355: inputs: mic=0xb, fmic=0xe, line=0x15, fline=0x0, cd=0x0, aux=0x0
[ 691.935241] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 723.711733] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 723.711764] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 723.957938] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2339: autoconfig: line_outs=3 (0xd/0xc/0xf/0x0/0x0)
[ 723.957948] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2343: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 723.957954] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2347: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 723.957960] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2355: inputs: mic=0xb, fmic=0xe, line=0x15, fline=0x0, cd=0x0, aux=0x0
-------------- next part --------------
[ 0.000000] Linux version 2.6.22-6-generic (buildd at rothera) (gcc version 4.1.3 20070528 (prerelease) (Ubuntu 4.1.2-9ubuntu2)) #1 SMP Fri Jun 1 19:24:12 GMT 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe8cc00 (usable)
[ 0.000000] BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fe8ec00 - 000000003fe90c00 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fe90c00 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe710
[ 0.000000] Entering add_active_range(0, 0, 261772) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261772
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261772
[ 0.000000] On node 0 totalpages: 261772
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32143 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FEB00, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FD265, 005C (r1 DELL 9100 7 ASL 61)
[ 0.000000] ACPI: FACP 000FD35D, 00F4 (r3 DELL 9100 7 ASL 61)
[ 0.000000] ACPI: DSDT FFFC7174, 308C (r1 DELL dt_ex 1000 INTL 20050309)
[ 0.000000] ACPI: FACS 3FE8CC00, 0040
[ 0.000000] ACPI: SSDT FFFCA321, 00AC (r1 DELL st_ex 1000 INTL 20050309)
[ 0.000000] ACPI: APIC 000FD451, 0072 (r1 DELL 9100 7 ASL 61)
[ 0.000000] ACPI: BOOT 000FD4C3, 0028 (r1 DELL 9100 7 ASL 61)
[ 0.000000] ACPI: ASF! 000FD4EB, 0067 (r16 DELL 9100 7 ASL 61)
[ 0.000000] ACPI: MCFG 000FD552, 003E (r1 DELL 9100 7 ASL 61)
[ 0.000000] ACPI: HPET 000FD590, 0038 (r1 DELL 9100 7 ASL 61)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] Built 1 zonelists. Total pages: 259727
[ 0.000000] Kernel command line: root=UUID=731f03ac-8ac8-4501-b930-3a9cf3938e78 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2992.837 MHz processor.
[ 13.216536] Console: colour VGA+ 80x25
[ 13.216866] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 13.217217] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.239439] Memory: 1026756k/1047088k available (2002k kernel code, 19688k reserved, 913k data, 360k init, 129584k highmem)
[ 13.239448] virtual kernel memory layout:
[ 13.239450] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 13.239451] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 13.239452] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 13.239453] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 13.239454] .init : 0xc03df000 - 0xc0439000 ( 360 kB)
[ 13.239455] .data : 0xc02f4a8a - 0xc03d90d4 ( 913 kB)
[ 13.239456] .text : 0xc0100000 - 0xc02f4a8a (2002 kB)
[ 13.239459] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 13.239497] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, Processors=2, Nodes=1
[ 13.239517] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 13.239524] hpet0: 3 64-bit timers, 14318180 Hz
[ 13.320497] Calibrating delay using timer specific routine.. 5990.50 BogoMIPS (lpj=11981017)
[ 13.320518] Security Framework v1.0.0 initialized
[ 13.320522] SELinux: Disabled at boot.
[ 13.320535] Mount-cache hash table entries: 512
[ 13.320650] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[ 13.320658] monitor/mwait feature present.
[ 13.320661] using mwait in idle threads.
[ 13.320667] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 13.320670] CPU: L2 cache: 2048K
[ 13.320673] CPU: Physical Processor ID: 0
[ 13.320675] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000649d 00000000 00000000
[ 13.320685] Compat vDSO mapped to ffffe000.
[ 13.320699] Checking 'hlt' instruction... OK.
[ 13.336582] SMP alternatives: switching to UP code
[ 13.336867] ACPI: Core revision 20070126
[ 13.452894] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[ 13.452912] SMP alternatives: switching to SMP code
[ 13.452929] Booting processor 1/1 eip 3000
[ 13.463270] Initializing CPU#1
[ 13.540377] Calibrating delay using timer specific routine.. 5985.19 BogoMIPS (lpj=11970387)
[ 13.540387] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[ 13.540394] monitor/mwait feature present.
[ 13.540401] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 13.540404] CPU: L2 cache: 2048K
[ 13.540406] CPU: Physical Processor ID: 0
[ 13.540409] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000649d 00000000 00000000
[ 13.540958] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[ 13.540999] Total of 2 processors activated (11975.70 BogoMIPS).
[ 13.541150] ENABLING IO-APIC IRQs
[ 13.541334] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 13.688401] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 13.708408] Brought up 2 CPUs
[ 13.887909] migration_cost=146
[ 13.888090] Booting paravirtualized kernel on bare hardware
[ 13.888157] Time: 13:11:55 Date: 05/30/107
[ 13.888182] NET: Registered protocol family 16
[ 13.888278] EISA bus registered
[ 13.888284] ACPI: bus type pci registered
[ 13.888294] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
[ 13.912692] PCI: PCI BIOS revision 2.10 entry at 0xfb8d3, last bus=5
[ 13.912695] PCI: Using configuration type 1
[ 13.912696] Setting up standard PCI resources
[ 13.951455] ACPI: Interpreter enabled
[ 13.951459] ACPI: (supports S0 S1 S3 S4 S5)
[ 13.951482] ACPI: Using IOAPIC for interrupt routing
[ 14.024368] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 14.024388] PCI: Probing PCI hardware (bus 00)
[ 14.024993] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 14.024998] PCI quirk: region 0880-08bf claimed by ICH6 GPIO
[ 14.025674] PCI: Firmware left 0000:05:08.0 e100 interrupts enabled, disabling
[ 14.025757] PCI: Transparent bridge - 0000:00:1e.0
[ 14.025830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 14.026430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 14.027045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 14.027393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 14.027669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
[ 14.028005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
[ 14.835105] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 14.835515] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 14.835962] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 14.836399] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 14.836804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 14.837258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 14.837676] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 14.838093] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 14.838270] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 14.838285] pnp: PnP ACPI init
[ 14.838294] ACPI: bus type pnp registered
[ 14.869415] pnp: PnP ACPI: found 8 devices
[ 14.869417] ACPI: ACPI bus type pnp unregistered
[ 14.869422] PnPBIOS: Disabled by ACPI PNP
[ 14.869479] PCI: Using ACPI for IRQ routing
[ 14.869483] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 14.884045] NET: Registered protocol family 8
[ 14.884048] NET: Registered protocol family 20
[ 14.884114] pnp: 00:01: ioport range 0x800-0x85f has been reserved
[ 14.884117] pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
[ 14.884120] pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
[ 14.884129] pnp: 00:06: iomem range 0x0-0x9ffff could not be reserved
[ 14.884133] pnp: 00:06: iomem range 0x100000-0xffffff could not be reserved
[ 14.884136] pnp: 00:06: iomem range 0x1000000-0x3fe8cbff could not be reserved
[ 14.884139] pnp: 00:06: iomem range 0xf0000-0xfffff could not be reserved
[ 14.884145] pnp: 00:07: ioport range 0x100-0x1fe could not be reserved
[ 14.884147] pnp: 00:07: ioport range 0x200-0x277 has been reserved
[ 14.884150] pnp: 00:07: ioport range 0x280-0x2e7 has been reserved
[ 14.884153] pnp: 00:07: ioport range 0x2e8-0x2ef has been reserved
[ 14.884155] pnp: 00:07: ioport range 0x2f0-0x2f7 has been reserved
[ 14.884158] pnp: 00:07: ioport range 0x2f8-0x2ff has been reserved
[ 14.884161] pnp: 00:07: ioport range 0x300-0x377 could not be reserved
[ 14.884164] pnp: 00:07: ioport range 0x380-0x3bb has been reserved
[ 14.884167] pnp: 00:07: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 14.884170] pnp: 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 14.887644] Time: tsc clocksource has been installed.
[ 14.887660] Switched to high resolution mode on CPU 0
[ 14.887769] Switched to high resolution mode on CPU 1
[ 14.914526] PCI: Bridge: 0000:00:01.0
[ 14.914528] IO window: disabled.
[ 14.914533] MEM window: e8000000-efefffff
[ 14.914537] PREFETCH window: d8000000-dfffffff
[ 14.914541] PCI: Bridge: 0000:00:1c.0
[ 14.914542] IO window: disabled.
[ 14.914548] MEM window: e7f00000-e7ffffff
[ 14.914551] PREFETCH window: disabled.
[ 14.914556] PCI: Bridge: 0000:00:1c.4
[ 14.914558] IO window: disabled.
[ 14.914563] MEM window: disabled.
[ 14.914566] PREFETCH window: disabled.
[ 14.914571] PCI: Bridge: 0000:00:1c.5
[ 14.914572] IO window: disabled.
[ 14.914577] MEM window: disabled.
[ 14.914581] PREFETCH window: disabled.
[ 14.914586] PCI: Bridge: 0000:00:1e.0
[ 14.914589] IO window: d000-dfff
[ 14.914594] MEM window: e7e00000-e7efffff
[ 14.914598] PREFETCH window: disabled.
[ 14.914615] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.914621] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 14.914639] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.914645] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 14.914663] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.914668] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 14.914687] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.914693] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 14.914705] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 14.914715] NET: Registered protocol family 2
[ 14.959563] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.959634] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 14.960469] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 14.960721] TCP: Hash tables configured (established 131072 bind 65536)
[ 14.960725] TCP reno registered
[ 14.975713] checking if image is initramfs... it is
[ 15.513866] Freeing initrd memory: 6797k freed
[ 15.513962] Simple Boot Flag at 0x7a set to 0x1
[ 15.514469] audit: initializing netlink socket (disabled)
[ 15.514483] audit(1183209117.024:1): initialized
[ 15.514594] highmem bounce pool size: 64 pages
[ 15.516974] VFS: Disk quotas dquot_6.5.1
[ 15.517038] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.517133] io scheduler noop registered
[ 15.517136] io scheduler anticipatory registered
[ 15.517138] io scheduler deadline registered
[ 15.517154] io scheduler cfq registered (default)
[ 15.531296] Boot video device is 0000:01:00.0
[ 15.531386] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.531429] assign_interrupt_mode Found MSI capability
[ 15.531465] Allocate Port Service[0000:00:01.0:pcie00]
[ 15.531557] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.531602] assign_interrupt_mode Found MSI capability
[ 15.531638] Allocate Port Service[0000:00:1c.0:pcie00]
[ 15.531677] Allocate Port Service[0000:00:1c.0:pcie02]
[ 15.531769] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 15.531814] assign_interrupt_mode Found MSI capability
[ 15.531851] Allocate Port Service[0000:00:1c.4:pcie00]
[ 15.531891] Allocate Port Service[0000:00:1c.4:pcie02]
[ 15.531982] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 15.532032] assign_interrupt_mode Found MSI capability
[ 15.532068] Allocate Port Service[0000:00:1c.5:pcie00]
[ 15.532107] Allocate Port Service[0000:00:1c.5:pcie02]
[ 15.532329] isapnp: Scanning for PnP cards...
[ 15.883801] isapnp: No Plug & Play device found
[ 15.910830] Real Time Clock Driver v1.12ac
[ 15.910925] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 15.912075] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 15.912315] input: Macintosh mouse button emulation as /class/input/input0
[ 15.912451] PNP: No PS/2 controller found. Probing ports directly.
[ 15.914968] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 15.914976] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 15.915191] mice: PS/2 mouse device common for all mice
[ 15.915314] EISA: Probing bus 0 at eisa.0
[ 15.915347] EISA: Detected 0 cards.
[ 15.915510] TCP cubic registered
[ 15.915522] NET: Registered protocol family 1
[ 15.915544] Using IPI No-Shortcut mode
[ 15.915700] Magic number: 11:249:181
[ 15.915751] hash matches device ttyr7
[ 15.916065] Freeing unused kernel memory: 360k freed
[ 17.125398] Capability LSM initialized
[ 17.133538] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 17.133552] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 17.632596] usbcore: registered new interface driver usbfs
[ 17.632639] usbcore: registered new interface driver hub
[ 17.632680] usbcore: registered new device driver usb
[ 17.633981] USB Universal Host Controller Interface driver v3.0
[ 17.634066] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
[ 17.634084] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 17.634090] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 17.634273] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 17.634306] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80
[ 17.634472] usb usb1: configuration #1 chosen from 1 choice
[ 17.634511] hub 1-0:1.0: USB hub found
[ 17.634521] hub 1-0:1.0: 2 ports detected
[ 17.727393] SCSI subsystem initialized
[ 17.738369] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 19
[ 17.738389] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 17.738395] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 17.738432] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 17.738468] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 17.738609] usb usb2: configuration #1 chosen from 1 choice
[ 17.738651] hub 2-0:1.0: USB hub found
[ 17.738666] hub 2-0:1.0: 2 ports detected
[ 17.787844] libata version 2.21 loaded.
[ 17.797888] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[ 17.797893] e100: Copyright(c) 1999-2006 Intel Corporation
[ 17.842273] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 17.842290] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 17.842296] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 17.842329] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 17.842364] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40
[ 17.842505] usb usb3: configuration #1 chosen from 1 choice
[ 17.842546] hub 3-0:1.0: USB hub found
[ 17.842557] hub 3-0:1.0: 2 ports detected
[ 17.946199] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21
[ 17.946212] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 17.946217] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 17.946257] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 17.946288] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000ff20
[ 17.946431] usb usb4: configuration #1 chosen from 1 choice
[ 17.946468] hub 4-0:1.0: USB hub found
[ 17.946477] hub 4-0:1.0: 2 ports detected
[ 18.050632] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
[ 18.050646] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 18.050652] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 18.050693] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 18.050736] ehci_hcd 0000:00:1d.7: debug port 1
[ 18.050745] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 18.050755] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800
[ 18.054651] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 18.054792] usb usb5: configuration #1 chosen from 1 choice
[ 18.054834] hub 5-0:1.0: USB hub found
[ 18.054846] hub 5-0:1.0: 8 ports detected
[ 18.082025] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 18.158421] ahci 0000:00:1f.2: version 2.2
[ 18.158450] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
[ 18.897617] usb 5-3: new high speed USB device using ehci_hcd and address 2
[ 19.032146] usb 5-3: configuration #1 chosen from 1 choice
[ 19.161499] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 19.161504] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 19.161510] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 19.161804] scsi0 : ahci
[ 19.161873] scsi1 : ahci
[ 19.161928] scsi2 : ahci
[ 19.162016] scsi3 : ahci
[ 19.162052] ata1: SATA max UDMA/133 cmd 0xf8854d00 ctl 0x00000000 bmdma 0x00000000 irq 0
[ 19.162058] ata2: SATA max UDMA/133 cmd 0xf8854d80 ctl 0x00000000 bmdma 0x00000000 irq 0
[ 19.162063] ata3: SATA max UDMA/133 cmd 0xf8854e00 ctl 0x00000000 bmdma 0x00000000 irq 0
[ 19.162068] ata4: SATA max UDMA/133 cmd 0xf8854e80 ctl 0x00000000 bmdma 0x00000000 irq 0
[ 19.645238] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 19.647365] ata1.00: ata_hpa_resize 1: sectors = 312500000, hpa_sectors = 312500000
[ 19.647371] ata1.00: ATA-7: Maxtor 6L160M0, BANC1G10, max UDMA/133
[ 19.647374] ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 19.650851] ata1.00: ata_hpa_resize 1: sectors = 312500000, hpa_sectors = 312500000
[ 19.650857] ata1.00: configured for UDMA/133
[ 19.825222] usbcore: registered new interface driver libusual
[ 19.833306] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 19.833314] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 19.835540] Initializing USB Mass Storage driver...
[ 19.961102] ata2: SATA link down (SStatus 0 SControl 300)
[ 20.065029] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 20.239252] usb 3-1: configuration #1 chosen from 1 choice
[ 20.276927] ata3: SATA link down (SStatus 0 SControl 300)
[ 20.480821] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 20.588769] ata4: SATA link down (SStatus 0 SControl 300)
[ 20.588904] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L160M0 BANC PQ: 0 ANSI: 5
[ 20.589953] ata_piix 0000:00:1f.1: version 2.11
[ 20.589975] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 20.590023] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.590088] scsi4 : ata_piix
[ 20.590146] scsi5 : ata_piix
[ 20.590190] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 20.590195] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 20.597028] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 20.597051] sd 0:0:0:0: [sda] Write Protect is off
[ 20.597056] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.597090] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.597165] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 20.597184] sd 0:0:0:0: [sda] Write Protect is off
[ 20.597188] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.597219] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.597225] sda: sda1 sda2 sda3 sda4
[ 20.655038] usb 3-2: configuration #1 chosen from 1 choice
[ 20.663687] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.671452] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.912684] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 20.951700] Attempting manual resume
[ 20.951704] swsusp: Resume From Partition 8:4
[ 20.951706] PM: Checking swsusp image.
[ 20.951800] PM: Resume from disk failed.
[ 20.975725] kjournald starting. Commit interval 5 seconds
[ 20.975733] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.065847] usb 4-1: configuration #1 chosen from 1 choice
[ 21.076807] ata5.00: ATAPI, max UDMA/33
[ 21.076813] ata5.01: ATAPI, max UDMA/33
[ 21.240702] ata5.00: configured for UDMA/33
[ 21.308413] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 21.404862] ata5.01: configured for UDMA/33
[ 21.404896] ata6: port disabled. ignoring.
[ 21.412971] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B 0D20 PQ: 0 ANSI: 5
[ 21.413041] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 21.415039] scsi 4:0:1:0: CD-ROM PHILIPS DVD+-RW DVD8701 5D24 PQ: 0 ANSI: 5
[ 21.415089] scsi 4:0:1:0: Attached scsi generic sg2 type 5
[ 21.415163] ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 22
[ 21.436270] e100: eth0: e100_probe: addr 0xe7efd000, irq 22, MAC addr 00:12:3F:73:9F:AB
[ 21.496612] usb 4-2: configuration #1 chosen from 1 choice
[ 21.501647] usbcore: registered new interface driver hiddev
[ 21.501746] scsi6 : SCSI emulation for USB Mass Storage devices
[ 21.501801] usb-storage: device found at 2
[ 21.501805] usb-storage: waiting for device to settle before scanning
[ 21.519699] input: Logitech USB Receiver as /class/input/input1
[ 21.519726] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1
[ 21.534679] input: Dell Dell USB Keyboard as /class/input/input2
[ 21.534689] input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-2
[ 21.567644] input: HID 04d9:1166 as /class/input/input3
[ 21.567666] input: USB HID v1.10 Mouse [HID 04d9:1166] on usb-0000:00:1d.3-2
[ 21.567705] usbcore: registered new interface driver usbhid
[ 21.567710] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 21.567715] usbcore: registered new interface driver usb-storage
[ 21.567723] USB Mass Storage support registered.
[ 26.498019] usb-storage: device scan complete
[ 26.501876] scsi 6:0:0:0: Direct-Access Samsung CF Card CF 1.6E PQ: 0 ANSI: 0 CCS
[ 26.505877] scsi 6:0:0:1: Direct-Access Samsung MS Card MS 1.6E PQ: 0 ANSI: 0 CCS
[ 26.508477] scsi 6:0:0:2: Direct-Access Samsung SD Card MMC/SD 1.6E PQ: 0 ANSI: 0 CCS
[ 26.510790] scsi 6:0:0:3: Direct-Access Samsung SM/XD Card SM 1.6E PQ: 0 ANSI: 0 CCS
[ 26.515975] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 26.516039] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 26.517888] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 26.517946] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 26.521912] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 26.521981] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 26.525206] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 26.525270] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 28.495550] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 28.506105] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.511531] iTCO_vendor_support: vendor-support=0
[ 28.512706] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 28.512798] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 28.512811] iTCO_wdt: No card detected
[ 28.537315] Linux agpgart interface v0.102 (c) Dave Jones
[ 28.647505] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.647514] rt2500 1.1.0 CVS 2007061415 http://rt2x00.serialmonkey.com
[ 28.652873] intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
[ 28.652877] don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
[ 28.652879] you are certain that your <4>intel_rng: system has a functional
[ 28.652881] RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
[ 28.654899] agpgart: Detected an Intel 945G Chipset.
[ 28.675954] agpgart: AGP aperture is 256M @ 0x0
[ 28.677650] input: PC Speaker as /class/input/input4
[ 29.095235] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 29.095241] Uniform CD-ROM driver Revision: 3.20
[ 29.095337] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 29.104472] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
[ 29.104485] rt2500 EEPROM: 4 4 4 4 4 4 5 5 5 5 5 5 5 5 dBm Maximum
[ 29.115726] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 29.115823] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 29.245774] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/wireless/at76/at76c503.c: Atmel at76c50x USB Wireless LAN Driver 0.14beta1 loading
[ 29.516305] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/wireless/at76/at76c503.c: firmware version 1.101.2 #84 (fcs_len 4)
[ 29.517309] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/wireless/at76/at76c503.c: device's MAC 00:09:92:00:33:35, regulatory domain ETSI (Europe - (Spain+France) (id 48)
[ 29.517438] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/wireless/at76/at76c503.c: registered wlan0
[ 29.517467] usbcore: registered new interface driver lmpcm_usb
[ 29.517472] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/misc/lmpcm_usb.c: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[ 29.517489] usbcore: registered new interface driver at76_usb
[ 29.708218] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.708250] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 29.778770] NET: Registered protocol family 10
[ 29.778880] lo: Disabled Privacy Extensions
[ 29.956124] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2339: autoconfig: line_outs=3 (0xd/0xc/0xf/0x0/0x0)
[ 29.956130] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2343: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 29.956134] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2347: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 29.956138] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/hda_codec.c:2355: inputs: mic=0xb, fmic=0xe, line=0x15, fline=0x0, cd=0x0, aux=0x0
[ 29.996102] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:1232: stac92xx_auto_fill_dac_nids: No available DAC for pin 0x15
[ 29.996111] ALSA /usr/src/alsa/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:1020: hda-intel: no codecs initialized
[ 29.996167] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 30.113477] fuse init (API version 7.8)
[ 30.162831] lp: driver loaded but no devices found
[ 30.227288] Adding 594396k swap on /dev/disk/by-uuid/75b6d6d2-755e-4f0b-8446-f26ab3f8b3ac. Priority:-1 extents:1 across:594396k
[ 30.379850] EXT3 FS on sda1, internal journal
[ 30.708595] kjournald starting. Commit interval 5 seconds
[ 30.708733] EXT3 FS on sda3, internal journal
[ 30.708738] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.709462] kjournald starting. Commit interval 5 seconds
[ 30.709560] EXT3 FS on sda2, internal journal
[ 30.709565] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.311112] input: Power Button (FF) as /class/input/input5
[ 31.311123] ACPI: Power Button (FF) [PWRF]
[ 31.311182] input: Power Button (CM) as /class/input/input6
[ 31.311192] ACPI: Power Button (CM) [VBTN]
[ 31.377077] No dock devices found.
[ 31.438845] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 32.922657] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/wireless/at76/at76c503.c: 2522: assertion dev->istate == INIT failed
[ 33.655134] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/wireless/at76/at76c503.c: 2492: assertion dev->istate == SCANNING failed
[ 40.139047] ra0: no IPv6 routers present
[ 41.631974] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 41.631985] apm: disabled - APM is not SMP safe.
[ 41.830246] wlan0: no IPv6 routers present
[ 42.315165] Registering unionfs 1.4
[ 42.315171] unionfs: debugging is not enabled
[ 42.690666] Bluetooth: Core ver 2.11
[ 42.691079] NET: Registered protocol family 31
[ 42.691086] Bluetooth: HCI device and connection manager initialized
[ 42.691091] Bluetooth: HCI socket layer initialized
[ 42.698470] Bluetooth: L2CAP ver 2.8
[ 42.698476] Bluetooth: L2CAP socket layer initialized
[ 42.747642] Bluetooth: RFCOMM socket layer initialized
[ 42.747989] Bluetooth: RFCOMM TTY layer initialized
[ 42.747996] Bluetooth: RFCOMM ver 1.8
-------------- next part --------------
Codec: SigmaTel STAC9221 A1
Address: 0
Vendor Id: 0x83847680
Subsystem Id: 0x102801a7
Revision Id: 0x103201
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x69 0x69]
Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x17
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x18
Node 0x08 [Audio Output] wcaps 0x40211: Stereo Digital
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Node 0x09 [Audio Input] wcaps 0x140311: Stereo Digital
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Connection: 1
0x11
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect
Pin Default 0x02214030: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x02
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x01a19021: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1
0x04
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT Detect
Pin Default 0x01111012: [Jack] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173f: IN OUT HP Detect
Pin Default 0x01114010: [Jack] Speaker at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0824: IN Detect
Pin Default 0x02a19020: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x20: IN
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x01117011: [Jack] Speaker at Ext Rear
Conn = 1/8, Color = Yellow
Pin-ctls: 0x40: OUT
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 3
0x08* 0x17 0x19
Node 0x11 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN EAPD Detect
Pin Default 0x400000f1: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 7
0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 7
0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x01813122: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Node 0x16 [Volume Knob Widget] wcaps 0x600000: Mono
Node 0x17 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x80 0x80]
Connection: 1
0x12
Node 0x18 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x80 0x80]
Connection: 1
0x13
Node 0x19 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x1a [Audio Output] wcaps 0x30201: Stereo Digital
Node 0x1b [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x400000f2: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x1a
More information about the Alsa-devel
mailing list