[alsa-devel] Sound problem in Toshiba
Furkan Cayci
furkanca02 at gmail.com
Sat Jun 16 23:02:52 CEST 2007
Hi,
I am using Ubuntu 7.04.
After installing Ubuntu, I could't hear any sound from
my Toshiba Satellite A205-S4577, so I did the things
related with this article;
http://pastebin.ca/522731
After restarting laptop, I didn't take any errors, but there was
no sound again. Then I realized the output of the dmesg.
$ dmesg|grep alsa
[ 18.948000] ALSA /home/leonetix/alsa-driver/pci/hda/hda_codec.c:2339:
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 18.948000] ALSA /home/leonetix/alsa-driver/pci/hda/hda_codec.c:2343:
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.948000] ALSA /home/leonetix/alsa-driver/pci/hda/hda_codec.c:2347:
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 18.948000] ALSA /home/leonetix/alsa-driver/pci/hda/hda_codec.c:2355:
inputs: mic=0x19, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
[ 19.672000] ALSA
/home/leonetix/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:244:
si3054: cannot initialize. EXT MID = 0000
[ 19.680000] ALSA
/home/leonetix/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:256:
Link Frame Detect(FDT) is not ready (line status: 0000)
[ 33.572000] ALSA /home/leonetix/alsa-driver/pci/hda/hda_codec.c:1810:
hda_codec: model 'auto' is selected
[ 33.620000] ALSA /home/leonetix/alsa-driver/pci/hda/hda_codec.c:2339:
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 33.620000] ALSA /home/leonetix/alsa-driver/pci/hda/hda_codec.c:2343:
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 33.620000] ALSA /home/leonetix/alsa-driver/pci/hda/hda_codec.c:2347:
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 33.620000] ALSA /home/leonetix/alsa-driver/pci/hda/hda_codec.c:2355:
inputs: mic=0x19, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
[ 34.360000] ALSA
/home/leonetix/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:244:
si3054: cannot initialize. EXT MID = 0000
[ 34.368000] ALSA
/home/leonetix/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:256:
Link Frame Detect(FDT) is not ready (line status: 0000)
-------------------------
So, there is something wrong, but I didn't understand
and I was wondering if you could solve or show a way to do it.
Also, here is the output of lcpci -v
"00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff10
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at f0b40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0"
Thanks for your help,
Furkan
More information about the Alsa-devel
mailing list