[alsa-devel] Intel hda ICH7 not worked anymore after using wine

Xavi de Blas xaviblas at gmail.com
Mon Jul 9 16:56:54 CEST 2007


2007/7/9, Takashi Iwai <tiwai at suse.de>:
> At Mon, 9 Jul 2007 16:36:35 +0200,
> Xavi de Blas wrote:
> >
> > 2007/7/9, Takashi Iwai <tiwai at suse.de>:
> > > At Mon, 9 Jul 2007 15:58:30 +0200,
> > > Xavi de Blas wrote:
> > > >
> > > > 2007/7/9, Takashi Iwai <tiwai at suse.de>:
> > > > > At Mon, 9 Jul 2007 15:26:59 +0200,
> > > > > Xavi de Blas wrote:
> > > > > >
> > > > > > Hello
> > > > > >
> > > > > > 2007/7/9, Takashi Iwai <tiwai at suse.de>:
> > > > > > > At Mon, 9 Jul 2007 14:16:43 +0200,
> > > > > > > Xavi de Blas wrote:
> > > > > > > >
> > > > > > > > Hello, I installed Wine on my Ubuntu Feisty on IBM-lenovo X60s, and
> > > > > > > > after reboot, sound never worked again.
> > > > > > > >
> > > > > > > > I tried to activate and to hide modem on the bios. I tried to stop
> > > > > > > > machine, take off battery, wait 10s, put battery again, and boot
> > > > > > > > without the power cable connected... and i tried lots of things from
> > > > > > > > ubuntuforums. I reinstalled feisty and sound doesn't work.
> > > > > > > >
> > > > > > > > I used alsa-info.sh script, here is the result:
> > > > > > > >
> > > > > > > > http://pastebin.ca/610317
> > > > > > >
> > > > > > > The codec isn't handled via the proper support code but only by the
> > > > > > > generic parser.  It won't work for Thinkpad.
> > > > > > >
> > > > > >
> > > > > > I'm not sure if i understood... then, no solution for me now?
> > > > > >
> > > > > > should i try the alsa svn code?
> > > > > >
> > > > > >
> > > > > > > > Should the new kernel 2.6.22 help me?
> > > > > > >
> > > > > > > X60 is known to work with recent kernels (but you'd better to give
> > > > > > > probe_mask=1 option to avoid the modem codec).
> > > > > > >
> > > > > >
> > > > > > I tried, rebooted and pastebin changed:
> > > > > > http://pastebin.ca/610387
> > > > > >
> > > > > > This doesn't exist now:
> > > > > > # Codec: Conexant ID 2bfa
> > > > > > # Address: 1
> > > > > > # Vendor Id: 0x14f12bfa
> > > > > > # Subsystem Id: 0x17aa201b
> > > > > > # Revision Id: 0x90000
> > > > >
> > > > > Err, it's a modem codec.  Pass probe_mask=2 instead, then.
> > > > >
> > > >
> > > > Now i have still no sound. But there's no messages about hda on dmesg
> > > >
> > > > $ dmesg | grep -i hda
> > > >
> > > > $ tail -2 /etc/modprobe.d/alsa-base
> > > > options snd-hda-intel probe_mask=2
> > > >
> > > > I commented the /etc/modprobe.d/snd-hda-intel.modprobe
> > > >
> > > > On pastebin:
> > > > http://pastebin.ca/610431
> > > >
> > > > The "HDA-Intel Codec information" changed a lot.
> > > >
> > > > Still any ideas?
> > >
> > > It's really from 2.6.22 kernel?  I won't debug 2.6.20 kernel drivers
> > > unless you build ALSA 1.0.14 driver from tarball separately.
> > >
> > > Once after upgrading 2.6.22 kernel, try at first without any module
> > > options for snd-hda-intel.  Check /proc/asound/card0/codec#* file (if
> > > any) whether it recogizes AD1981 codec.  If not, play with probe_mask
> > > option.  Once after the module gets loaded, then make sure that you
> > > unmuted / adjusted the mixer volumes.  Use aplay or speaker-test for
> > > testing.  Finally, if it still doesn't work, report again.
> > >
> >
> >
> > No, it's this kernel:
> > $ uname -a
> > Linux corall 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux
> >
> > I asked about upgrading to 2.6.22, but i'm still on 2.6.20
> >
> > But i built alsa 1.0.14 separately
>
> Then it should work definitely... at least on Thinkpad X60.
>
>
> > My asound/card... is:
> >
> > $ cat /proc/asound/card0/codec#*
> > Codec: Conexant ID 2bfa
> > Address: 1
> > Vendor Id: 0x14f12bfa
> > Subsystem Id: 0x17aa201b
> > Revision Id: 0x90000
> >
> > If you can help me now, i will be glad, if not, i will try to upload
> > to 2.6.22 as soon as possible. Thanks
>
> Remove all module options for snd-hda-intel.  That's the first step.
> After loading the module, see the file
> /sys/modules/snd_hda_intel/parameters/probe_mask.  This value should
> be -1 (not 1 or 2).
>
> Honestly, this is a kind of topic that is handled on alsa-users ML...
>

I continue on that list, thanks Takashi

>
> Takashi
>


More information about the Alsa-devel mailing list