[alsa-devel] default setting not fully working with new ALSA device

[Tobin Davis]

Could you post the output from
http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh ?  This
script will give us more detailed information on what sound chip it is.
We will also need to know the brand of board, for the driver file.

Thanks,

Tobin

On Wed, 2007-07-04 at 16:48 +0200, Peter Matthias wrote:

> Hello,
> 
> I have got a 690G board with following lspic -nv output:
> 
> 01:05.2 0403: 1002:7919
>         Subsystem: 1002:7919
>         Flags: bus master, fast devsel, latency 64, IRQ 19
>         Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K]
>         Capabilities: [50] Power Management version 2
>         Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 
> Enable-
> 
> With the default setting, microphone does not work. With module 
> parameter "modprobe -i snd-hda-intel model=6stack-dig" microphone works well. 
> Please add to default setting. It was written in Linux Kernel documentation 
> to report this issue here.
> 
> Thank you,
> 	Peter
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

-- 
Tobin Davis <tdavis at dsl-only.net>