[alsa-devel] No sound with ATI SB450

[Tobin Davis]

Try downloading a current daily snapshot from
ftp://ftp.suse.com/pub/projects/alsa/snapshot/ .

There was an issue with the ATI HD Audio detection that was fixed after
14rc3 was released.

Tobin

On Sat, 2007-04-21 at 16:00 +1000, Ben DiDonc wrote:

> The output of alsa-info.sh is available at http://pastebin.ca/451007
> 
> 
> 
> On 4/21/07, Tobin Davis <tdavis at dsl-only.net> wrote:
> 
>         Could you download an run
>         http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh ,
>         then post the resulting link?  This will help determine what
>         setup you have.
>         
>         Tobin Davis
>         
>         
>         
>         On Sat, 2007-04-21 at 14:56 +1000, Ben DiDonc wrote:
>         > Hi I have a toshiba A100 (see attached file lspci-nnv) with
>         > a ATI SB450. Sound worked fine with kernel 2.6.17 and alsa
>         > 1.0.12rc1 (ubuntu edgy). I just did a fresh install of
>         > ubuntu feisty (kernel 2.6.20, alsa 1.0.14rc1) and the only
>         > mixer settings available are those of the modem, named
>         > off-hook and caller-id (see output of amixer, aplay -l , and
>         > the rest in attached file output_feisty) I decided to
>         > upgrade alsa-driver and alsa-lib to 1.0.14rc2. after
>         > downloading the package, I unloaded all sound related
>         > modules (everything with "snd_" in it) in the right order
>         > and did: ./configure --with-oss=yes
>         > --with-cards=hda-intel;make; sudo make install; sudo
>         > modprobe snd_hda_intel A minor improvement: the mixer now
>         > shows controls for both the modem and the sound card (see
>         > output_after_upgrade_to_rc2), but unfortunately, there is
>         > still no sound coming out of those speakers (even though
>         > alsamixer shows control for PCM and the rest...). Finally, I
>         > downloaded alsa-driver-1.0.14rc3 and gave it a shot. This
>         > time again, only modem related settings appeared in
>         > alsamixer, and no sound card stuff (see aplay and amixer in
>         > output_after_upgrade_to_rc3), and no sound either. Does
>         > anyone know how to get some sound out of these speakers
>         > (given that it used to work with alsa1.0.12rc1...) ? Thanks
>         > for your help Ben 
>         > 
>         > _______________________________________________
>         > Alsa-devel mailing list
>         > Alsa-devel at alsa-project.org
>         > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>         > 
>         
>         -- 
>         Tobin Davis <tdavis at dsl-only.net>
> 
> 

-- 
Tobin Davis <tdavis at dsl-only.net>