From: Peter Ujfalusi peter.ujfalusi@linux.intel.com

[ Upstream commit c40aad7c81e5fba34b70123ed7ce3397fa62a4d2 ]

When the system is suspended while audio is active, the sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during suspend the DSP is turned off, streams will be re-started after resume.

If the firmware crashes during while audio is running (or when we reset the stream before suspend) then the sof_ipc4_set_multi_pipeline_state() will fail with IPC error and the state change is interrupted. This will cause misalignment between the kernel and firmware state on next DSP boot resulting errors returned by firmware for IPC messages, eventually failing the audio resume. On stream close the errors are ignored so the kernel state will be corrected on the next DSP boot, so the second boot after the DSP panic.

If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then state parameter is SOF_IPC4_PIPE_RESET and only in this case.

Treat a forced pipeline reset similarly to how we treat a pcm_free by ignoring error on state sending to allow the kernel's state to be consistent with the state the firmware will have after the next boot.

Link: https://github.com/thesofproject/sof/issues/8721 Signed-off-by: Peter Ujfalusi peter.ujfalusi@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sof/ipc4-pcm.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sof/ipc4-pcm.c b/sound/soc/sof/ipc4-pcm.c index 39039a647cca3..ea70c0d7cf75a 100644 --- a/sound/soc/sof/ipc4-pcm.c +++ b/sound/soc/sof/ipc4-pcm.c @@ -413,7 +413,18 @@ static int sof_ipc4_trigger_pipelines(struct snd_soc_component *component, ret = sof_ipc4_set_multi_pipeline_state(sdev, state, trigger_list); if (ret < 0) { dev_err(sdev->dev, "failed to set final state %d for all pipelines\n", state); - goto free; + /* + * workaround: if the firmware is crashed while setting the + * pipelines to reset state we must ignore the error code and + * reset it to 0. + * Since the firmware is crashed we will not send IPC messages + * and we are going to see errors printed, but the state of the + * widgets will be correct for the next boot. + */ + if (sdev->fw_state != SOF_FW_CRASHED || state != SOF_IPC4_PIPE_RESET) + goto free; + + ret = 0; }

/* update RUNNING/RESET state for all pipelines that were just triggered */