Re: [Sound-open-firmware] [PATCH 1/2] ASoC: SOF: imx: Add i.MX8ULP HW support
On Tue, Jul 19, 2022 at 7:41 PM Mark Brown broonie@kernel.org wrote:
On Tue, Jul 19, 2022 at 01:26:06PM +0800, Shengjiu Wang wrote:
Not a thorough review, just a few nitpicks:
Thanks.
+#define MBOX_SIZE 0x1000
+struct arm_smccc_res smc_resource;
This should be static shouldn't it?
I will move it to function as a local variable.
+static void imx8ulp_dsp_handle_reply(struct imx_dsp_ipc *ipc) +{
struct imx8ulp_priv *priv = imx_dsp_get_data(ipc);
unsigned long flags;
spin_lock_irqsave(&priv->sdev->ipc_lock, flags);
imx8ulp_get_reply(priv->sdev);
snd_sof_ipc_reply(priv->sdev, 0);
spin_unlock_irqrestore(&priv->sdev->ipc_lock, flags);
Minor nitpick but a blank line before the unlock to match the one after the lock would be a bit easier to read.
ok, will update
regmap_update_bits(priv->regmap, SYSCTRL0, EXECUTE_BIT,
EXECUTE_BIT);
usleep_range(1, 2);
arm_smccc_smc(FSL_SIP_HIFI_XRDC, 0, 0, 0, 0, 0, 0, 0,
&smc_resource);
You need linux/arm-smccc.h for this (as 0day said).
Yes, right.
if (ret) {
dev_err(&pdev->dev, "failed to init reserved memory region
%d\n", ret);
goto exit_pdev_unregister;
}
priv->clks->dsp_clks = imx8ulp_dsp_clks;
priv->clks->num_dsp_clks = ARRAY_SIZE(imx8ulp_dsp_clks);
ret = imx8_parse_clocks(sdev, priv->clks);
if (ret < 0)
goto exit_pdev_unregister;
ret = imx8_enable_clocks(sdev, priv->clks);
if (ret < 0)
goto exit_pdev_unregister;
We're registering the platform device before we enable the clocks - is that safe?
Yes, it is safe.
+static int imx8ulp_remove(struct snd_sof_dev *sdev) +{
struct imx8ulp_priv *priv = sdev->pdata->hw_pdata;
platform_device_unregister(priv->ipc_dev);
return 0;
+}
Could we just use devm? I'm not seeing an ordering issue but I might be missing something.
Which devm do you mean? There seems no devm_platform_device_register_data().
best regards wang shengjiu
participants (1)
-
Shengjiu Wang