From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> [ Upstream commit bbfef046c6613404c01aeb9e9928bebb78dd327a ] Update the comment for the cl_dsp_init() to clarify what is done by the function and use the chip->init_core_mask instead of BIT(0) when unstalling/running the init core. Complements: 2a68ff846164 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220609085949.29062-4-peter.ujfalusi@linux.intel.... Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> --- sound/soc/sof/intel/hda-loader.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c index 14469e087b00..ee09393d42cb 100644 --- a/sound/soc/sof/intel/hda-loader.c +++ b/sound/soc/sof/intel/hda-loader.c @@ -80,9 +80,9 @@ static struct hdac_ext_stream *cl_stream_prepare(struct snd_sof_dev *sdev, unsig } /* - * first boot sequence has some extra steps. core 0 waits for power - * status on core 1, so power up core 1 also momentarily, keep it in - * reset/stall and then turn it off + * first boot sequence has some extra steps. + * power on all host managed cores and only unstall/run the boot core to boot the + * DSP then turn off all non boot cores (if any) is powered on. */ static int cl_dsp_init(struct snd_sof_dev *sdev, int stream_tag) { @@ -117,7 +117,7 @@ static int cl_dsp_init(struct snd_sof_dev *sdev, int stream_tag) ((stream_tag - 1) << 9))); /* step 3: unset core 0 reset state & unstall/run core 0 */ - ret = hda_dsp_core_run(sdev, BIT(0)); + ret = hda_dsp_core_run(sdev, chip->init_core_mask); if (ret < 0) { if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS) dev_err(sdev->dev, -- 2.35.1