Hello all,
Here's one tutorial written from Zephyr perspective how to setup a Tiger
Lake Chromebook and get up and running with Zephyr code on the DSP: That is really helpful. Many thanks. I assume for other CPU vendors supporting SOF on Chromebooks the guide is similar.
Would it possible that some AMD guys comment on (sonly) available Chromebooks for SOF development with the Hifi5 on platform Rembrandt?
Kind regards Martin
-----Ursprüngliche Nachricht----- Von: Sound-open-firmware sound-open-firmware-bounces@alsa-project.org Im Auftrag von Kai Vehmanen Gesendet: Mittwoch, 1. Februar 2023 10:45 An: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Cc: sound-open-firmware@alsa-project.org; Gerion Entrup entrup@sra.uni-hannover.de Betreff: Re: [Sound-open-firmware] Real hardware (boards) on which the SOF runs
Hi,
On Tue, 31 Jan 2023, Pierre-Louis Bossart wrote:
On 1/31/23 04:26, Gerion Entrup wrote:
The only Intel-based devices you can use for you own development are the Up Extreme i11 boards or TigerLake+ Chromebooks in developer mode. These two sets of devices use the community key and
have the DSP configured.
The Extreme i11 boards look promising.
Regarding the Chrombooks: I'm not familiar with these devices. Is it possible to use them as a "server"? So reboot and connect to them over SSH while the developer mode stays active?
yes, the 'developer mode' is something that you can set once and it can remain on over reboot cycles. It's not that straightforward but it's not the end of the world either.
the typical setup is indeed to have a SSH connection set up between development and target machine. The CrOS developer documentation covers this well: https://chromium.googlesource.com/chromiumos/docs/+/HEAD/developer_guide.md https://chromium.googlesource.com/chromiumos/docs/+/HEAD/developer_mode.md
Here's one tutorial written from Zephyr perspective how to setup a Tiger Lake Chromebook and get up and running with Zephyr code on the DSP: https://github.com/zephyrproject-rtos/zephyr/blob/main/boards/xtensa/intel_a dsp_cavs25/doc/index.rst
This guide uses Crouton (to enable the full Zephyr test framework on the tested device), but that is not mandatory. Ssh connections are used to run tests on plain CrOS test images as well: https://chromium.googlesource.com/chromiumos/docs/+/HEAD/developer_guide.md# Set-up-SSH-connection-between-chroot-and-DUT
Br, Kai _______________________________________________ Sound-open-firmware mailing list Sound-open-firmware@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/sound-open-firmware