On 7/19/23 18:41, Maarten Lankhorst wrote:
This was only used to allow modprobing i915, by converting to the -EPROBE_DEFER mechanism, it can be completely removed, and is in fact counterproductive since -EPROBE_DEFER otherwise won't be handled correctly.
I personally remember only that the request_module("i915") was the main motivation for the use of the workqueue, but when it comes to the HDaudio codec management we don't even know what we don't know.
I am a bit worried that the snd-hda-intel driver keeps the workqueue for HDaudio codec initialization, and this patch removes the workqueue completely for SOF. That doesn't seem right. Either both drivers need a workqueue or none need a workqueue.
Maybe what we need is to move the i915/xe initialization out of the workqueue, and see in a second pass if that workqueue can be safely removed from the SOF driver?
Signed-off-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com Acked-by: Matthew Auld matthew.auld@intel.com Acked-by: Mark Brown broonie@kernel.org
sound/soc/sof/Kconfig | 19 ----------------- sound/soc/sof/core.c | 38 ++------------------------------- sound/soc/sof/intel/Kconfig | 1 - sound/soc/sof/intel/hda-codec.c | 2 +- sound/soc/sof/intel/hda.c | 32 ++++++++++++++++----------- sound/soc/sof/sof-pci-dev.c | 3 +-- sound/soc/sof/sof-priv.h | 5 ----- 7 files changed, 23 insertions(+), 77 deletions(-)
diff --git a/sound/soc/sof/Kconfig b/sound/soc/sof/Kconfig index 80361139a49ad..8ee39e5558062 100644 --- a/sound/soc/sof/Kconfig +++ b/sound/soc/sof/Kconfig @@ -82,17 +82,6 @@ config SND_SOC_SOF_DEVELOPER_SUPPORT
if SND_SOC_SOF_DEVELOPER_SUPPORT
-config SND_SOC_SOF_FORCE_PROBE_WORKQUEUE
- bool "SOF force probe workqueue"
- select SND_SOC_SOF_PROBE_WORK_QUEUE
- help
This option forces the use of a probe workqueue, which is only used
when HDaudio is enabled due to module dependencies. Forcing this
option is intended for debug only, but this should not add any
functional issues in nominal cases.
Say Y if you are involved in SOF development and need this option.
If not, select N.
config SND_SOC_SOF_NOCODEC tristate
@@ -271,14 +260,6 @@ config SND_SOC_SOF module dependencies but since the module or built-in type is decided at the top level it doesn't matter.
-config SND_SOC_SOF_PROBE_WORK_QUEUE
- bool
- help
This option is not user-selectable but automagically handled by
'select' statements at a higher level.
When selected, the probe is handled in two steps, for example to
avoid lockdeps if request_module is used in the probe.
# Supported IPC versions config SND_SOC_SOF_IPC3 bool diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c index 30db685cc5f4b..cdf86dc4a8a87 100644 --- a/sound/soc/sof/core.c +++ b/sound/soc/sof/core.c @@ -191,7 +191,8 @@ static int sof_probe_continue(struct snd_sof_dev *sdev) /* probe the DSP hardware */ ret = snd_sof_probe(sdev); if (ret < 0) {
dev_err(sdev->dev, "error: failed to probe DSP %d\n", ret);
if (ret != -EPROBE_DEFER)
goto probe_err; }dev_err(sdev->dev, "error: failed to probe DSP %d\n", ret);
@@ -309,8 +310,6 @@ static int sof_probe_continue(struct snd_sof_dev *sdev) if (plat_data->sof_probe_complete) plat_data->sof_probe_complete(sdev->dev);
- sdev->probe_completed = true;
- return 0;
sof_machine_err: @@ -336,19 +335,6 @@ static int sof_probe_continue(struct snd_sof_dev *sdev) return ret; }
-static void sof_probe_work(struct work_struct *work) -{
- struct snd_sof_dev *sdev =
container_of(work, struct snd_sof_dev, probe_work);
- int ret;
- ret = sof_probe_continue(sdev);
- if (ret < 0) {
/* errors cannot be propagated, log */
dev_err(sdev->dev, "error: %s failed err: %d\n", __func__, ret);
- }
-}
int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data) { struct snd_sof_dev *sdev; @@ -436,33 +422,16 @@ int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data)
sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED);
- if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) {
INIT_WORK(&sdev->probe_work, sof_probe_work);
schedule_work(&sdev->probe_work);
return 0;
- }
- return sof_probe_continue(sdev);
} EXPORT_SYMBOL(snd_sof_device_probe);
-bool snd_sof_device_probe_completed(struct device *dev) -{
- struct snd_sof_dev *sdev = dev_get_drvdata(dev);
- return sdev->probe_completed;
-} -EXPORT_SYMBOL(snd_sof_device_probe_completed);
int snd_sof_device_remove(struct device *dev) { struct snd_sof_dev *sdev = dev_get_drvdata(dev); struct snd_sof_pdata *pdata = sdev->pdata; int ret;
- if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE))
cancel_work_sync(&sdev->probe_work);
- /*
- Unregister any registered client device first before IPC and debugfs
- to allow client drivers to be removed cleanly
@@ -501,9 +470,6 @@ int snd_sof_device_shutdown(struct device *dev) { struct snd_sof_dev *sdev = dev_get_drvdata(dev);
- if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE))
cancel_work_sync(&sdev->probe_work);
- if (sdev->fw_state == SOF_FW_BOOT_COMPLETE) { sof_fw_trace_free(sdev); return snd_sof_shutdown(sdev);
diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig index 69c1a370d3b61..d9e87a91670a3 100644 --- a/sound/soc/sof/intel/Kconfig +++ b/sound/soc/sof/intel/Kconfig @@ -293,7 +293,6 @@ config SND_SOC_SOF_HDA_LINK config SND_SOC_SOF_HDA_AUDIO_CODEC bool "SOF support for HDAudio codecs" depends on SND_SOC_SOF_HDA_LINK
- select SND_SOC_SOF_PROBE_WORK_QUEUE help This adds support for HDAudio codecs with Sound Open Firmware for Intel(R) platforms.
diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c index f1fd5b44aaac9..344b61576c0e3 100644 --- a/sound/soc/sof/intel/hda-codec.c +++ b/sound/soc/sof/intel/hda-codec.c @@ -415,7 +415,7 @@ int hda_codec_i915_init(struct snd_sof_dev *sdev) return 0;
/* i915 exposes a HDA codec for HDMI audio */
- ret = snd_hdac_i915_init(bus, true);
- ret = snd_hdac_i915_init(bus, false); if (ret < 0) return ret;
diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index 64bebe1a72bbc..a8b7a68142c05 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -801,8 +801,11 @@ static int hda_init(struct snd_sof_dev *sdev)
/* init i915 and HDMI codecs */ ret = hda_codec_i915_init(sdev);
- if (ret < 0)
dev_warn(sdev->dev, "init of i915 and HDMI codec failed\n");
if (ret < 0) {
if (ret != -EPROBE_DEFER)
dev_warn(sdev->dev, "init of i915 and HDMI codec failed: %i\n", ret);
return ret;
}
/* get controller capabilities */ ret = hda_dsp_ctrl_get_caps(sdev);
@@ -1115,14 +1118,6 @@ int hda_dsp_probe(struct snd_sof_dev *sdev) sdev->pdata->hw_pdata = hdev; hdev->desc = chip;
- hdev->dmic_dev = platform_device_register_data(sdev->dev, "dmic-codec",
PLATFORM_DEVID_NONE,
NULL, 0);
- if (IS_ERR(hdev->dmic_dev)) {
dev_err(sdev->dev, "error: failed to create DMIC device\n");
return PTR_ERR(hdev->dmic_dev);
- }
- /*
- use position update IPC if either it is forced
- or we don't have other choice
@@ -1142,6 +1137,15 @@ int hda_dsp_probe(struct snd_sof_dev *sdev) if (ret < 0) goto hdac_bus_unmap;
- hdev->dmic_dev = platform_device_register_data(sdev->dev, "dmic-codec",
PLATFORM_DEVID_NONE,
NULL, 0);
- if (IS_ERR(hdev->dmic_dev)) {
dev_err(sdev->dev, "error: failed to create DMIC device\n");
ret = PTR_ERR(hdev->dmic_dev);
goto hdac_exit;
- }
I am not following why we have to move dmic-related code, can we try to move this in a separate patch?
if (sdev->dspless_mode_selected) goto skip_dsp_setup;
@@ -1150,7 +1154,7 @@ int hda_dsp_probe(struct snd_sof_dev *sdev) if (!sdev->bar[HDA_DSP_BAR]) { dev_err(sdev->dev, "error: ioremap error\n"); ret = -ENXIO;
goto hdac_bus_unmap;
goto platform_unreg;
}
sdev->mmio_bar = HDA_DSP_BAR;
@@ -1248,10 +1252,12 @@ int hda_dsp_probe(struct snd_sof_dev *sdev) /* dsp_unmap: not currently used */ if (!sdev->dspless_mode_selected) iounmap(sdev->bar[HDA_DSP_BAR]); -hdac_bus_unmap: +platform_unreg: platform_device_unregister(hdev->dmic_dev);
- iounmap(bus->remap_addr);
+hdac_exit: hda_codec_i915_exit(sdev); +hdac_bus_unmap:
- iounmap(bus->remap_addr);
err: return ret; } diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c index f5ece43d0ec24..0fa424613082e 100644 --- a/sound/soc/sof/sof-pci-dev.c +++ b/sound/soc/sof/sof-pci-dev.c @@ -339,8 +339,7 @@ void sof_pci_remove(struct pci_dev *pci) snd_sof_device_remove(&pci->dev);
/* follow recommendation in pci-driver.c to increment usage counter */
- if (snd_sof_device_probe_completed(&pci->dev) &&
!(sof_pci_debug & SOF_PCI_DISABLE_PM_RUNTIME))
if (!(sof_pci_debug & SOF_PCI_DISABLE_PM_RUNTIME)) pm_runtime_get_noresume(&pci->dev);
/* release pci regions and disable device */
diff --git a/sound/soc/sof/sof-priv.h b/sound/soc/sof/sof-priv.h index d4f6702e93dcb..71db636cfdccc 100644 --- a/sound/soc/sof/sof-priv.h +++ b/sound/soc/sof/sof-priv.h @@ -564,10 +564,6 @@ struct snd_sof_dev { enum sof_fw_state fw_state; bool first_boot;
- /* work queue in case the probe is implemented in two steps */
- struct work_struct probe_work;
- bool probe_completed;
- /* DSP HW differentiation */ struct snd_sof_pdata *pdata;
@@ -675,7 +671,6 @@ struct snd_sof_dev { int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data); int snd_sof_device_remove(struct device *dev); int snd_sof_device_shutdown(struct device *dev); -bool snd_sof_device_probe_completed(struct device *dev);
int snd_sof_runtime_suspend(struct device *dev); int snd_sof_runtime_resume(struct device *dev);