On Tue, 2019-11-19 at 15:33 +0000, Paul Olaru wrote:
Hello, I'm trying to begin doing all my builds with XCC for testing and, besides one issue where I need to manually insert stack alignment code in the IRQ handling function for the DMA domain it seems to work. Also, if I align the stack within my IRQ_STEER handler it remains aligned for the domain handler just fine.
My question is, why within irq_handler (see src/drivers/imx/interrupt.c, function begins around line 275) the stack is not aligned? Did you also encounter this issue on other platforms? And is there any good solution other than that bit of inline assembly that just force- aligns the stack pointer when entering the cascaded IRQ handler?
Never encountered this on Intel platforms. It could be another issue that shows up when handling an IRQ ?
Does the emulator shed any light on this ?
Without this code I seem to get panics with an alignment exception, the address pointing within an Interrupt stack and epc0 not being correct (I think I need to investigate that as well but that's a low-priority issue).
Could be corruption somewhere else ? I guess the timer IRQs and SW IRQs work fine without the alignment ?
Liam
Compiler version for reference (in case there is a known issue I'm not aware of):
xt-xcc -v xt-xcc version 11.0.4 Thread model: single _______________________________________________ Sound-open-firmware mailing list Sound-open-firmware@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/sound-open-firmware