Re: [Sound-open-firmware] [PATCH v5 4/4] vhost: add an RPMsg API

Good afternoon,

On Wed, Aug 26, 2020 at 07:46:36PM +0200, Guennadi Liakhovetski wrote:

Linux supports running the RPMsg protocol over the VirtIO transport protocol, but currently there is only support for VirtIO clients and no support for a VirtIO server. This patch adds a vhost-based RPMsg server implementation.

This changelog is very confusing... At this time the name service in the remoteproc space runs as a server on the application processor. But from the above the remoteproc usecase seems to be considered to be a client configuration.

And I don't see a server implementation per se... It is more like a client implementation since vhost_rpmsg_announce() uses the RESPONSE queue, which sends messages from host to guest.

Perhaps it is my lack of familiarity with vhost terminology.

Signed-off-by: Guennadi Liakhovetski guennadi.liakhovetski@linux.intel.com

drivers/vhost/Kconfig | 7 + drivers/vhost/Makefile | 3 + drivers/vhost/rpmsg.c | 373 ++++++++++++++++++++++++++++++++++++ drivers/vhost/vhost_rpmsg.h | 74 +++++++ 4 files changed, 457 insertions(+) create mode 100644 drivers/vhost/rpmsg.c create mode 100644 drivers/vhost/vhost_rpmsg.h

diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig index 587fbae06182..046b948fc411 100644 --- a/drivers/vhost/Kconfig +++ b/drivers/vhost/Kconfig @@ -38,6 +38,13 @@ config VHOST_NET To compile this driver as a module, choose M here: the module will be called vhost_net.

+config VHOST_RPMSG

• tristate
• select VHOST
• help

•  Vhost RPMsg API allows vhost drivers to communicate with VirtIO
  

•  drivers, using the RPMsg over VirtIO protocol.
  

I had to assume vhost drivers are running on the host and virtIO drivers on the guests. This may be common knowledge for people familiar with vhosts but certainly obscur for commoners Having a help section that is clear on what is happening would remove any ambiguity.

config VHOST_SCSI tristate "VHOST_SCSI TCM fabric driver" depends on TARGET_CORE && EVENTFD diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile index f3e1897cce85..9cf459d59f97 100644 --- a/drivers/vhost/Makefile +++ b/drivers/vhost/Makefile @@ -2,6 +2,9 @@ obj-$(CONFIG_VHOST_NET) += vhost_net.o vhost_net-y := net.o

+obj-$(CONFIG_VHOST_RPMSG) += vhost_rpmsg.o +vhost_rpmsg-y := rpmsg.o

obj-$(CONFIG_VHOST_SCSI) += vhost_scsi.o vhost_scsi-y := scsi.o

diff --git a/drivers/vhost/rpmsg.c b/drivers/vhost/rpmsg.c new file mode 100644 index 000000000000..c26d7a4afc6d --- /dev/null +++ b/drivers/vhost/rpmsg.c @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: GPL-2.0-only +/*

• • Copyright(c) 2020 Intel Corporation. All rights reserved.
• • Author: Guennadi Liakhovetski guennadi.liakhovetski@linux.intel.com
• • Vhost RPMsg VirtIO interface. It provides a set of functions to match the
• • guest side RPMsg VirtIO API, provided by drivers/rpmsg/virtio_rpmsg_bus.c

Again, very confusing. The changelog refers to a server implementation but to me this refers to a client implementation, especially if rpmsg_recv_single() and rpmsg_ns_cb() are used on the other side of the pipe.

• • These functions handle creation of 2 virtual queues, handling of endpoint
• • addresses, sending a name-space announcement to the guest as well as any
• • user messages. This API can be used by any vhost driver to handle RPMsg
• • specific processing.
• • Specific vhost drivers, using this API will use their own VirtIO device
• • IDs, that should then also be added to the ID table in virtio_rpmsg_bus.c
• */

+#include <linux/compat.h> +#include <linux/file.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/vhost.h> +#include <linux/virtio_rpmsg.h> +#include <uapi/linux/rpmsg.h>

+#include "vhost.h" +#include "vhost_rpmsg.h"

+/*

• • All virtio-rpmsg virtual queue kicks always come with just one buffer -
• • either input or output, but we can also handle split messages
• */

+static int vhost_rpmsg_get_msg(struct vhost_virtqueue *vq, unsigned int *cnt) +{

• struct vhost_rpmsg *vr = container_of(vq->dev, struct vhost_rpmsg, dev);
• unsigned int out, in;
• int head = vhost_get_vq_desc(vq, vq->iov, ARRAY_SIZE(vq->iov), &out, &in,

• 		     NULL, NULL);
  

• if (head < 0) {

• vq_err(vq, "%s(): error %d getting buffer\n",
  

•        __func__, head);
  

• return head;
  

• }
• /* Nothing new? */
• if (head == vq->num)

• return head;
  

• if (vq == &vr->vq[VIRTIO_RPMSG_RESPONSE]) {

• if (out) {
  

• 	vq_err(vq, "%s(): invalid %d output in response queue\n",
  

• 	       __func__, out);
  

• 	goto return_buf;
  

• }
  

• *cnt = in;
  

• }
• if (vq == &vr->vq[VIRTIO_RPMSG_REQUEST]) {

• if (in) {
  

• 	vq_err(vq, "%s(): invalid %d input in request queue\n",
  

•        __func__, in);
  

• 	goto return_buf;
  

• }
  

• *cnt = out;
  

• }
• return head;

+return_buf:

• vhost_add_used(vq, head, 0);
• return -EINVAL;

+}

+static const struct vhost_rpmsg_ept *vhost_rpmsg_ept_find(struct vhost_rpmsg *vr, int addr) +{

• unsigned int i;
• for (i = 0; i < vr->n_epts; i++)

• if (vr->ept[i].addr == addr)
  

• 	return vr->ept + i;
  

• return NULL;

+}

+/*

• • if len < 0, then for reading a request, the complete virtual queue buffer
• • size is prepared, for sending a response, the length in the iterator is used
• */

+int vhost_rpmsg_start_lock(struct vhost_rpmsg *vr, struct vhost_rpmsg_iter *iter,

• 	   unsigned int qid, ssize_t len)
  

• __acquires(vq->mutex)

+{

• struct vhost_virtqueue *vq = vr->vq + qid;
• unsigned int cnt;
• ssize_t ret;
• size_t tmp;
• if (qid >= VIRTIO_RPMSG_NUM_OF_VQS)

• return -EINVAL;
  

• iter->vq = vq;
• mutex_lock(&vq->mutex);
• vhost_disable_notify(&vr->dev, vq);
• iter->head = vhost_rpmsg_get_msg(vq, &cnt);
• if (iter->head == vq->num)

• iter->head = -EAGAIN;
  

• if (iter->head < 0) {

• ret = iter->head;
  

• goto unlock;
  

• }
• tmp = iov_length(vq->iov, cnt);
• if (tmp < sizeof(iter->rhdr)) {

• vq_err(vq, "%s(): size %zu too small\n", __func__, tmp);
  

• ret = -ENOBUFS;
  

• goto return_buf;
  

• }
• switch (qid) {
• case VIRTIO_RPMSG_REQUEST:

• if (len >= 0) {
  

• 	if (tmp < sizeof(iter->rhdr) + len) {
  

• 		ret = -ENOBUFS;
  

• 		goto return_buf;
  

• 	}
  

• 	tmp = len + sizeof(iter->rhdr);
  

• }
  

• /* len is now the size of the payload */
  

• iov_iter_init(&iter->iov_iter, WRITE, vq->iov, cnt, tmp);
  

• /* Read the RPMSG header with endpoint addresses */
  

• tmp = copy_from_iter(&iter->rhdr, sizeof(iter->rhdr), &iter->iov_iter);
  

• if (tmp != sizeof(iter->rhdr)) {
  

• 	vq_err(vq, "%s(): got %zu instead of %zu\n", __func__,
  

• 	       tmp, sizeof(iter->rhdr));
  

• 	ret = -EIO;
  

• 	goto return_buf;
  

• }
  

• iter->ept = vhost_rpmsg_ept_find(vr, vhost32_to_cpu(vq, iter->rhdr.dst));
  

• if (!iter->ept) {
  

• 	vq_err(vq, "%s(): no endpoint with address %d\n",
  

• 	       __func__, vhost32_to_cpu(vq, iter->rhdr.dst));
  

• 	ret = -ENOENT;
  

• 	goto return_buf;
  

• }
  

• /* Let the endpoint read the payload */
  

• if (iter->ept->read) {
  

• 	ret = iter->ept->read(vr, iter);
  

• 	if (ret < 0)
  

• 		goto return_buf;
  

• 	iter->rhdr.len = cpu_to_vhost16(vq, ret);
  

• } else {
  

• 	iter->rhdr.len = 0;
  

• }
  

• /* Prepare for the response phase */
  

• iter->rhdr.dst = iter->rhdr.src;
  

• iter->rhdr.src = cpu_to_vhost32(vq, iter->ept->addr);
  

• break;
  

• case VIRTIO_RPMSG_RESPONSE:

• if (!iter->ept && iter->rhdr.dst != cpu_to_vhost32(vq, RPMSG_NS_ADDR)) {
  

• 	/*
  

• 	 * Usually the iterator is configured when processing a
  

• 	 * message on the request queue, but it's also possible
  

• 	 * to send a message on the response queue without a
  

• 	 * preceding request, in that case the iterator must
  

• 	 * contain source and destination addresses.
  

• 	 */
  

• 	iter->ept = vhost_rpmsg_ept_find(vr, vhost32_to_cpu(vq, iter->rhdr.src));
  

• 	if (!iter->ept) {
  

• 		ret = -ENOENT;
  

• 		goto return_buf;
  

• 	}
  

• }
  

• if (len >= 0) {
  

• 	if (tmp < sizeof(iter->rhdr) + len) {
  

• 		ret = -ENOBUFS;
  

• 		goto return_buf;
  

• 	}
  

• 	iter->rhdr.len = cpu_to_vhost16(vq, len);
  

• 	tmp = len + sizeof(iter->rhdr);
  

• }
  

• /* len is now the size of the payload */
  

• iov_iter_init(&iter->iov_iter, READ, vq->iov, cnt, tmp);
  

• /* Write the RPMSG header with endpoint addresses */
  

• tmp = copy_to_iter(&iter->rhdr, sizeof(iter->rhdr), &iter->iov_iter);
  

• if (tmp != sizeof(iter->rhdr)) {
  

• 	ret = -EIO;
  

• 	goto return_buf;
  

• }
  

• /* Let the endpoint write the payload */
  

• if (iter->ept && iter->ept->write) {
  

• 	ret = iter->ept->write(vr, iter);
  

• 	if (ret < 0)
  

• 		goto return_buf;
  

• }
  

• break;
  

• }
• return 0;

+return_buf:

• vhost_add_used(vq, iter->head, 0);

+unlock:

• vhost_enable_notify(&vr->dev, vq);
• mutex_unlock(&vq->mutex);
• return ret;

+} +EXPORT_SYMBOL_GPL(vhost_rpmsg_start_lock);

+size_t vhost_rpmsg_copy(struct vhost_rpmsg *vr, struct vhost_rpmsg_iter *iter,

• 	void *data, size_t size)
  

+{

• /*

• * We could check for excess data, but copy_{to,from}_iter() don't do
  

• * that either
  

• */
  

• if (iter->vq == vr->vq + VIRTIO_RPMSG_RESPONSE)

• return copy_to_iter(data, size, &iter->iov_iter);
  

• return copy_from_iter(data, size, &iter->iov_iter);

+} +EXPORT_SYMBOL_GPL(vhost_rpmsg_copy);

+int vhost_rpmsg_finish_unlock(struct vhost_rpmsg *vr,

• 	      struct vhost_rpmsg_iter *iter)
  

• __releases(vq->mutex)

+{

• if (iter->head >= 0)

• vhost_add_used_and_signal(iter->vq->dev, iter->vq, iter->head,
  

• 			  vhost16_to_cpu(iter->vq, iter->rhdr.len) +
  

• 			  sizeof(iter->rhdr));
  

• vhost_enable_notify(&vr->dev, iter->vq);
• mutex_unlock(&iter->vq->mutex);
• return iter->head;

+} +EXPORT_SYMBOL_GPL(vhost_rpmsg_finish_unlock);

+/*

• • Return false to terminate the external loop only if we fail to obtain either
• • a request or a response buffer
• */

+static bool handle_rpmsg_req_single(struct vhost_rpmsg *vr,

• 		    struct vhost_virtqueue *vq)
  

+{

• struct vhost_rpmsg_iter iter;
• int ret = vhost_rpmsg_start_lock(vr, &iter, VIRTIO_RPMSG_REQUEST, -EINVAL);
• if (!ret)

• ret = vhost_rpmsg_finish_unlock(vr, &iter);
  

• if (ret < 0) {

• if (ret != -EAGAIN)
  

• 	vq_err(vq, "%s(): RPMSG processing failed %d\n",
  

• 	       __func__, ret);
  

• return false;
  

• }
• if (!iter.ept->write)

• return true;
  

• ret = vhost_rpmsg_start_lock(vr, &iter, VIRTIO_RPMSG_RESPONSE, -EINVAL);
• if (!ret)

• ret = vhost_rpmsg_finish_unlock(vr, &iter);
  

• if (ret < 0) {

• vq_err(vq, "%s(): RPMSG finalising failed %d\n", __func__, ret);
  

• return false;
  

• }
• return true;

+}

+static void handle_rpmsg_req_kick(struct vhost_work *work) +{

• struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,

• 				  poll.work);
  

• struct vhost_rpmsg *vr = container_of(vq->dev, struct vhost_rpmsg, dev);
• while (handle_rpmsg_req_single(vr, vq))

• ;
  

+}

+/*

• • initialise two virtqueues with an array of endpoints,
• • request and response callbacks
• */

+void vhost_rpmsg_init(struct vhost_rpmsg *vr, const struct vhost_rpmsg_ept *ept,

•       unsigned int n_epts)
  

+{

• unsigned int i;
• for (i = 0; i < ARRAY_SIZE(vr->vq); i++)

• vr->vq_p[i] = &vr->vq[i];
  

• /* vq[0]: host -> guest, vq[1]: host <- guest */
• vr->vq[VIRTIO_RPMSG_REQUEST].handle_kick = handle_rpmsg_req_kick;
• vr->vq[VIRTIO_RPMSG_RESPONSE].handle_kick = NULL;
• vr->ept = ept;
• vr->n_epts = n_epts;
• vhost_dev_init(&vr->dev, vr->vq_p, VIRTIO_RPMSG_NUM_OF_VQS,

•        UIO_MAXIOV, 0, 0, true, NULL);
  

+} +EXPORT_SYMBOL_GPL(vhost_rpmsg_init);

+void vhost_rpmsg_destroy(struct vhost_rpmsg *vr) +{

• if (vhost_dev_has_owner(&vr->dev))

• vhost_poll_flush(&vr->vq[VIRTIO_RPMSG_REQUEST].poll);
  

• vhost_dev_cleanup(&vr->dev);

+} +EXPORT_SYMBOL_GPL(vhost_rpmsg_destroy);

+/* send namespace */ +int vhost_rpmsg_ns_announce(struct vhost_rpmsg *vr, const char *name, unsigned int src) +{

• struct vhost_virtqueue *vq = &vr->vq[VIRTIO_RPMSG_RESPONSE];
• struct vhost_rpmsg_iter iter = {

• .rhdr = {
  

• 	.src = 0,
  

• 	.dst = cpu_to_vhost32(vq, RPMSG_NS_ADDR),
  

• 	.flags = cpu_to_vhost16(vq, RPMSG_NS_CREATE), /* rpmsg_recv_single() */
  

Where is the flag used in rpmsg_recv_single()? It is used for the name space message (as you have below) but not in the header when doing a name space announcement.

• },
  

• };
• struct rpmsg_ns_msg ns = {

• .addr = cpu_to_vhost32(vq, src),
  

• .flags = cpu_to_vhost32(vq, RPMSG_NS_CREATE), /* for rpmsg_ns_cb() */
  

• };
• int ret = vhost_rpmsg_start_lock(vr, &iter, VIRTIO_RPMSG_RESPONSE, sizeof(ns));
• if (ret < 0)

• return ret;
  

• strlcpy(ns.name, name, sizeof(ns.name));
• ret = vhost_rpmsg_copy(vr, &iter, &ns, sizeof(ns));
• if (ret != sizeof(ns))

• vq_err(iter.vq, "%s(): added %d instead of %zu bytes\n",
  

•        __func__, ret, sizeof(ns));
  

• ret = vhost_rpmsg_finish_unlock(vr, &iter);
• if (ret < 0)

• vq_err(iter.vq, "%s(): namespace announcement failed: %d\n",
  

•        __func__, ret);
  

• return ret;

+} +EXPORT_SYMBOL_GPL(vhost_rpmsg_ns_announce);

+MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Intel, Inc."); +MODULE_DESCRIPTION("Vhost RPMsg API"); diff --git a/drivers/vhost/vhost_rpmsg.h b/drivers/vhost/vhost_rpmsg.h new file mode 100644 index 000000000000..30072cecb8a0 --- /dev/null +++ b/drivers/vhost/vhost_rpmsg.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/*

• • Copyright(c) 2020 Intel Corporation. All rights reserved.
• • Author: Guennadi Liakhovetski guennadi.liakhovetski@linux.intel.com
• */

+#ifndef VHOST_RPMSG_H +#define VHOST_RPMSG_H

+#include <linux/uio.h> +#include <linux/virtio_rpmsg.h>

+#include "vhost.h"

+/* RPMsg uses two VirtQueues: one for each direction */ +enum {

• VIRTIO_RPMSG_RESPONSE, /* RPMsg response (host->guest) buffers */
• VIRTIO_RPMSG_REQUEST, /* RPMsg request (guest->host) buffers */
• /* Keep last */
• VIRTIO_RPMSG_NUM_OF_VQS,

+};

+struct vhost_rpmsg_ept;

+struct vhost_rpmsg_iter {

• struct iov_iter iov_iter;
• struct rpmsg_hdr rhdr;
• struct vhost_virtqueue *vq;
• const struct vhost_rpmsg_ept *ept;
• int head;
• void *priv;

I don't see @priv being used anywhere.

+};

+struct vhost_rpmsg {

• struct vhost_dev dev;
• struct vhost_virtqueue vq[VIRTIO_RPMSG_NUM_OF_VQS];
• struct vhost_virtqueue *vq_p[VIRTIO_RPMSG_NUM_OF_VQS];
• const struct vhost_rpmsg_ept *ept;
• unsigned int n_epts;

+};

+struct vhost_rpmsg_ept {

• ssize_t (*read)(struct vhost_rpmsg *, struct vhost_rpmsg_iter *);
• ssize_t (*write)(struct vhost_rpmsg *, struct vhost_rpmsg_iter *);
• int addr;

+};

+static inline size_t vhost_rpmsg_iter_len(const struct vhost_rpmsg_iter *iter) +{

• return iter->rhdr.len;

+}

Again, I don't see where this is used.

+#define VHOST_RPMSG_ITER(_vq, _src, _dst) { \

• .rhdr = { \

• 	.src = cpu_to_vhost32(_vq, _src),	\
  

• 	.dst = cpu_to_vhost32(_vq, _dst),	\
  

• },						\
  

• }

Same.

Thanks, Mathieu

+void vhost_rpmsg_init(struct vhost_rpmsg *vr, const struct vhost_rpmsg_ept *ept,

•       unsigned int n_epts);
  

+void vhost_rpmsg_destroy(struct vhost_rpmsg *vr); +int vhost_rpmsg_ns_announce(struct vhost_rpmsg *vr, const char *name,

• 	    unsigned int src);
  

+int vhost_rpmsg_start_lock(struct vhost_rpmsg *vr,

• 	   struct vhost_rpmsg_iter *iter,
  

• 	   unsigned int qid, ssize_t len);
  

+size_t vhost_rpmsg_copy(struct vhost_rpmsg *vr, struct vhost_rpmsg_iter *iter,

• 	void *data, size_t size);
  

+int vhost_rpmsg_finish_unlock(struct vhost_rpmsg *vr,

• 	      struct vhost_rpmsg_iter *iter);
  

+#endif

2.28.0