Hi Pierre,
On 3/7/2018 10:01 PM, Pierre-Louis Bossart wrote:
On 3/6/18 10:31 PM, Rander Wang wrote:
set ssp according to DSP_B spec
Signed-off-by: Rander Wang rander.wang@linux.intel.com
src/drivers/apl-ssp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/src/drivers/apl-ssp.c b/src/drivers/apl-ssp.c index a726f3c..c32bd35 100644 --- a/src/drivers/apl-ssp.c +++ b/src/drivers/apl-ssp.c @@ -333,10 +333,11 @@ static inline int ssp_set_config(struct dai *dai, sscr0 |= SSCR0_MOD | SSCR0_FRDC(config->num_slots); /* set asserted frame length */ - frame_len = config->sample_container_bits; + frame_len = 1;
this needs to be done for DSP_B as well.
you mean DSP_A ? yes, this patch is for DSP_B, next DSP_A will be validated
/* handle frame polarity, DSP_A default is rising/active high */ - sspsp |= SSPSP_SFRMP(inverted_frame); + sspsp |= SSPSP_SFRMP(!inverted_frame);
I don't think this is correct. the documentation says with this bit asserted (value=1) the frame is active high which is exactly what we want.
No, the frame active low is what we want according to the ASOC spec. Data is sent when active low, frame sync is at active high.
And without this modification, the frame sync clock is rotated 180 compared to spec. And it is validated by Zhigang on APL and
also it is set by COE
+ sspsp |= SSPSP_FSRT;
why is this necessary? this disables a fix for dummy stop/padding.
it is get from COE setting.
break; default: