virtio_rpmsg_bus.c keeps RPMsg protocol structure declarations and common defines like the ones, needed for name-space announcements, internal. Move them to common headers instead.
Signed-off-by: Guennadi Liakhovetski guennadi.liakhovetski@linux.intel.com --- drivers/rpmsg/virtio_rpmsg_bus.c | 78 +----------------------------- include/linux/rpmsg/virtio.h | 83 ++++++++++++++++++++++++++++++++ include/uapi/linux/rpmsg.h | 3 ++ 3 files changed, 88 insertions(+), 76 deletions(-) create mode 100644 include/linux/rpmsg/virtio.h
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index 9006fc7f73d0..f39c426f9c5e 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -19,6 +19,7 @@ #include <linux/mutex.h> #include <linux/of_device.h> #include <linux/rpmsg.h> +#include <linux/rpmsg/virtio.h> #include <linux/scatterlist.h> #include <linux/slab.h> #include <linux/sched.h> @@ -27,6 +28,7 @@ #include <linux/virtio_ids.h> #include <linux/virtio_config.h> #include <linux/wait.h> +#include <uapi/linux/rpmsg.h>
#include "rpmsg_internal.h"
@@ -70,58 +72,6 @@ struct virtproc_info { struct rpmsg_endpoint *ns_ept; };
-/* The feature bitmap for virtio rpmsg */ -#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */ - -/** - * struct rpmsg_hdr - common header for all rpmsg messages - * @src: source address - * @dst: destination address - * @reserved: reserved for future use - * @len: length of payload (in bytes) - * @flags: message flags - * @data: @len bytes of message payload data - * - * Every message sent(/received) on the rpmsg bus begins with this header. - */ -struct rpmsg_hdr { - __virtio32 src; - __virtio32 dst; - __virtio32 reserved; - __virtio16 len; - __virtio16 flags; - u8 data[]; -} __packed; - -/** - * struct rpmsg_ns_msg - dynamic name service announcement message - * @name: name of remote service that is published - * @addr: address of remote service that is published - * @flags: indicates whether service is created or destroyed - * - * This message is sent across to publish a new service, or announce - * about its removal. When we receive these messages, an appropriate - * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe() - * or ->remove() handler of the appropriate rpmsg driver will be invoked - * (if/as-soon-as one is registered). - */ -struct rpmsg_ns_msg { - char name[RPMSG_NAME_SIZE]; - __virtio32 addr; - __virtio32 flags; -} __packed; - -/** - * enum rpmsg_ns_flags - dynamic name service announcement flags - * - * @RPMSG_NS_CREATE: a new remote service was just created - * @RPMSG_NS_DESTROY: a known remote service was just destroyed - */ -enum rpmsg_ns_flags { - RPMSG_NS_CREATE = 0, - RPMSG_NS_DESTROY = 1, -}; - /** * @vrp: the remote processor this channel belongs to */ @@ -134,27 +84,6 @@ struct virtio_rpmsg_channel { #define to_virtio_rpmsg_channel(_rpdev) \ container_of(_rpdev, struct virtio_rpmsg_channel, rpdev)
-/* - * We're allocating buffers of 512 bytes each for communications. The - * number of buffers will be computed from the number of buffers supported - * by the vring, upto a maximum of 512 buffers (256 in each direction). - * - * Each buffer will have 16 bytes for the msg header and 496 bytes for - * the payload. - * - * This will utilize a maximum total space of 256KB for the buffers. - * - * We might also want to add support for user-provided buffers in time. - * This will allow bigger buffer size flexibility, and can also be used - * to achieve zero-copy messaging. - * - * Note that these numbers are purely a decision of this driver - we - * can change this without changing anything in the firmware of the remote - * processor. - */ -#define MAX_RPMSG_NUM_BUFS (512) -#define MAX_RPMSG_BUF_SIZE (512) - /* * Local addresses are dynamically allocated on-demand. * We do not dynamically assign addresses from the low 1024 range, @@ -162,9 +91,6 @@ struct virtio_rpmsg_channel { */ #define RPMSG_RESERVED_ADDRESSES (1024)
-/* Address 53 is reserved for advertising remote services */ -#define RPMSG_NS_ADDR (53) - static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept); static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len); static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, diff --git a/include/linux/rpmsg/virtio.h b/include/linux/rpmsg/virtio.h new file mode 100644 index 000000000000..3ede1a4a68a3 --- /dev/null +++ b/include/linux/rpmsg/virtio.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _LINUX_RPMSG_VIRTIO_H +#define _LINUX_RPMSG_VIRTIO_H + +#include <linux/mod_devicetable.h> +#include <linux/types.h> +#include <linux/virtio_types.h> + +/** + * struct rpmsg_hdr - common header for all rpmsg messages + * @src: source address + * @dst: destination address + * @reserved: reserved for future use + * @len: length of payload (in bytes) + * @flags: message flags + * @data: @len bytes of message payload data + * + * Every message sent(/received) on the rpmsg bus begins with this header. + */ +struct rpmsg_hdr { + __virtio32 src; + __virtio32 dst; + __virtio32 reserved; + __virtio16 len; + __virtio16 flags; + u8 data[]; +} __packed; + +/** + * struct rpmsg_ns_msg - dynamic name service announcement message + * @name: name of remote service that is published + * @addr: address of remote service that is published + * @flags: indicates whether service is created or destroyed + * + * This message is sent across to publish a new service, or announce + * about its removal. When we receive these messages, an appropriate + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe() + * or ->remove() handler of the appropriate rpmsg driver will be invoked + * (if/as-soon-as one is registered). + */ +struct rpmsg_ns_msg { + char name[RPMSG_NAME_SIZE]; + __virtio32 addr; + __virtio32 flags; +} __packed; + +/** + * enum rpmsg_ns_flags - dynamic name service announcement flags + * + * @RPMSG_NS_CREATE: a new remote service was just created + * @RPMSG_NS_DESTROY: a known remote service was just destroyed + */ +enum rpmsg_ns_flags { + RPMSG_NS_CREATE = 0, + RPMSG_NS_DESTROY = 1, +}; + +/* + * We're allocating buffers of 512 bytes each for communications. The + * number of buffers will be computed from the number of buffers supported + * by the vring, upto a maximum of 512 buffers (256 in each direction). + * + * Each buffer will have 16 bytes for the msg header and 496 bytes for + * the payload. + * + * This will utilize a maximum total space of 256KB for the buffers. + * + * We might also want to add support for user-provided buffers in time. + * This will allow bigger buffer size flexibility, and can also be used + * to achieve zero-copy messaging. + * + * Note that these numbers are purely a decision of this driver - we + * can change this without changing anything in the firmware of the remote + * processor. + */ +#define MAX_RPMSG_NUM_BUFS 512 +#define MAX_RPMSG_BUF_SIZE 512 + +/* Address 53 is reserved for advertising remote services */ +#define RPMSG_NS_ADDR 53 + +#endif diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h index e14c6dab4223..d669c04ef289 100644 --- a/include/uapi/linux/rpmsg.h +++ b/include/uapi/linux/rpmsg.h @@ -24,4 +24,7 @@ struct rpmsg_endpoint_info { #define RPMSG_CREATE_EPT_IOCTL _IOW(0xb5, 0x1, struct rpmsg_endpoint_info) #define RPMSG_DESTROY_EPT_IOCTL _IO(0xb5, 0x2)
+/* The feature bitmap for virtio rpmsg */ +#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */ + #endif