Add based on sof-glk-codec. In theory this is the same topology with only a swap of SSPs
FIXME: this is a mess between pipeline ID, PCM ID, DAI ID, DAI #. I could use additional eyes to proof-read this...
FIXME: not sure why we would need PCM_CAPTURE_ADD/PCM_PLAYBACK_DAI, this seems to be already done by DAI_ADD?
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- topology/Makefile.am | 1 + topology/sof-apl-da7219.m4 | 104 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 105 insertions(+) create mode 100644 topology/sof-apl-da7219.m4
diff --git a/topology/Makefile.am b/topology/Makefile.am index 33d0418..396b5b9 100644 --- a/topology/Makefile.am +++ b/topology/Makefile.am @@ -31,6 +31,7 @@ MACHINES = \ sof-hsw-rt5640.tplg \ sof-apl-tdf8532.tplg \ sof-apl-pcm512x.tplg \ + sof-apl-da7219.tplg \ sof-glk-codec.tplg
# Uncomment the following line if you want to debug conf files diff --git a/topology/sof-apl-da7219.m4 b/topology/sof-apl-da7219.m4 new file mode 100644 index 0000000..3934df5 --- /dev/null +++ b/topology/sof-apl-da7219.m4 @@ -0,0 +1,104 @@ +# +# Topology for AppoloLake with headset on SSP1, spk on SSP5 and DMIC capture +# + +# Include topology builder +include(`utils.m4') +include(`dai.m4') +include(`pipeline.m4') +include(`ssp.m4') + +# Include TLV library +include(`common/tlv.m4') + +# Include Token library +include(`sof/tokens.m4') + +# Include bxt DSP configuration +include(`platform/intel/bxt.m4') +include(`platform/intel/dmic.m4') + +# +# Define the pipelines +# +# PCM0 <---- volume <----- DMIC0 (dmic capture) +# PCM0 ----> volume -----> SSP5 (speaker - maxim98357a) +# PCM1 ----> volume -----> SSP1 (headset - da7219) +# + +# Low Latency capture pipeline 1 on PCM 0 using max 4 channels of s32le. +# Schedule 48 frames per 1000us deadline on core 0 with priority 0 +PIPELINE_PCM_ADD(sof/pipe-volume-capture.m4, + 1, 0, 4, s32le, + 48, 1000, 0, 0) + +# Low Latency playback pipeline 2 on PCM 0 using max 2 channels of s16le. +# Schedule 48 frames per 1000us deadline on core 0 with priority 0 +PIPELINE_PCM_ADD(sof/pipe-volume-playback.m4, + 2, 0, 2, s16le, + 48, 1000, 0, 0) + +# Low Latency playback pipeline 3 on PCM 1 using max 2 channels of s16le. +# Schedule 48 frames per 1000us deadline on core 0 with priority 0 +PIPELINE_PCM_ADD(sof/pipe-volume-playback.m4, + 3, 1, 2, s16le, + 48, 1000, 0, 0) + +# +# DAIs configuration +# + +# capture DAI is DMIC0 using 2 periods +# Buffers use s16le format, with 48 frame per 1000us on core 0 with priority 0 +DAI_ADD(sof/pipe-dai-capture.m4, + 1, DMIC, 0, DMIC0, + PIPELINE_SINK_1, 2, s32le, + 48, 1000, 0, 0) + +# playback DAI is SSP5 using 2 periods +# Buffers use s16le format, with 48 frame per 1000us on core 0 with priority 0 +DAI_ADD(sof/pipe-dai-playback.m4, + 2, SSP, 5, SSP5-Codec, + PIPELINE_SOURCE_2, 2, s16le, + 48, 1000, 0, 0) + +# playback DAI is SSP1 using 2 periods +# Buffers use s16le format, with 48 frame per 1000us on core 0 with priority 0 +DAI_ADD(sof/pipe-dai-playback.m4, + 3, SSP, 1, SSP1-Codec, + PIPELINE_SOURCE_3, 2, s16le, + 48, 1000, 0, 0) + +# FIXME: Why is this needed? And is this correct? +# PCM (PCM_CAPTURE_ADD(name, pipeline, pcm_id, dai_id, capture)) +#PCM_CAPTURE_ADD(DMIC0, 1, 0, 0, PIPELINE_PCM_1) +#PCM_PLAYBACK_ADD(SSP5, 2, 0, 5, PIPELINE_PCM_2) +#PCM_PLAYBACK_ADD(SSP1, 3, 1, 1, PIPELINE_PCM_3) + +# +# BE configurations - overrides config in ACPI if present +# +# FIXME: the machine driver uses .name = "dmic01" and .id=2 +# DMIC0 (id: 2) +DAI_CONFIG(DMIC, 0, 2, dmic01, + DMIC_CONFIG(1, 500000, 4800000, 40, 60, 48000, + DMIC_WORD_LENGTH(s32le), DMIC, 0, + PDM_CONFIG(DMIC, 0, FOUR_CH_PDM0_PDM1))) + +# FIXME: the machine driver uses .name = "SSP5-Codec", .id=0, .cpu_name="SSP5 Pin" +#SSP 5 (ID: 0) with 19.2MHz mclk with MCLK_ID 0 +DAI_CONFIG(SSP, 5, 0, SSP5-Codec, + SSP_CONFIG(I2S, SSP_CLOCK(mclk, 19200000, codec_mclk_in), + SSP_CLOCK(bclk, 1920000, codec_slave), + SSP_CLOCK(fsync, 48000, codec_slave), + SSP_TDM(2, 20, 3, 3), + SSP_CONFIG_DATA(SSP, 5, 16, 0))) + +# FIXME: the machine driver uses .name = "SSP1-Codec", .id=1, .cpu_name="SSP1 Pin" +#SSP 1 (ID: 1) with 19.2MHz mclk with MCLK_ID 0 +DAI_CONFIG(SSP, 1, 1, SSP1-Codec, + SSP_CONFIG(I2S, SSP_CLOCK(mclk, 19200000, codec_mclk_in), + SSP_CLOCK(bclk, 1920000, codec_slave), + SSP_CLOCK(fsync, 48000, codec_slave), + SSP_TDM(2, 20, 3, 3), + SSP_CONFIG_DATA(SSP, 1, 16, 0)))