MCLK and BCLK can be independentely divided from Xtal or Audio cardinal clock. With this patch MCLK can be divided by at most a factor of 8.
The M/N dividers remain bypassed since they introduce an irregular duty-cycle for the BCLK, which isn't desirable if the BCLK is used as a reference by an external device.
The MCLK1 output was not tested since I don't have hardware to test this configuration but the register address is set according to the specification.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- src/drivers/apl-ssp.c | 123 +++++++++++++++++++++++++++++++++++++++----------- src/include/sof/ssp.h | 5 ++ 2 files changed, 101 insertions(+), 27 deletions(-)
diff --git a/src/drivers/apl-ssp.c b/src/drivers/apl-ssp.c index 1190596..df0c0f8 100644 --- a/src/drivers/apl-ssp.c +++ b/src/drivers/apl-ssp.c @@ -44,6 +44,10 @@ #define trace_ssp_error(__e) trace_error(TRACE_CLASS_SSP, __e) #define tracev_ssp(__e) tracev_event(TRACE_CLASS_SSP, __e)
+#define F_19200_kHz 19200000 +#define F_24000_kHz 24000000 +#define F_24576_kHz 24576000 + /* FIXME: move this to a helper and optimize */ static int hweight_32(uint32_t mask) { @@ -103,6 +107,7 @@ static inline int ssp_set_config(struct dai *dai, uint32_t bdiv; uint32_t mdivc; uint32_t mdivr; + uint32_t mdivr_val; uint32_t i2s_m; uint32_t i2s_n; uint32_t data_size; @@ -232,21 +237,104 @@ static inline int ssp_set_config(struct dai *dai, goto out; }
-if CONFIG_APOLLOLAKE - sscr0 |= SSCR0_MOD | SSCR0_ACS | SSCR0_ECS; -#else sscr0 |= SSCR0_MOD | SSCR0_ACS; + + mdivc = 0x1; +#ifdef CONFIG_CANNONLAKE + if (!config->ssp.mclk_rate || config->ssp.mclk_rate > F_24000_kHz) { + trace_ssp_error("eci"); + ret = -EINVAL; + goto out; + } + if (!config->ssp.bclk_rate || + config->ssp.bclk_rate > config->ssp.mclk_rate) { + trace_ssp_error("ecj"); + ret = -EINVAL; + goto out; + } + + if (F_24000_kHz % config->ssp.mclk_rate == 0) { + mdivr_val = F_24000_kHz / config->ssp.mclk_rate; + } else { + trace_ssp_error("eck"); + ret = -EINVAL; + goto out; + } + + if (F_24000_kHz % config->ssp.bclk_rate == 0) { + mdiv = F_24000_kHz / config->ssp.bclk_rate; + } else { + trace_ssp_error("ecl"); + ret = -EINVAL; + goto out; + } +#else + if (!config->ssp.mclk_rate || config->ssp.mclk_rate > F_24576_kHz) { + trace_ssp_error("eci"); + ret = -EINVAL; + goto out; + } + if (!config->ssp.bclk_rate || + config->ssp.bclk_rate > config->ssp.mclk_rate) { + trace_ssp_error("ecj"); + ret = -EINVAL; + goto out; + } + if (F_24576_kHz % config->ssp.mclk_rate == 0) { + /* select Audio Cardinal clock for MCLK */ + mdivc |= MCDSS(1); + mdivr_val = F_24576_kHz / config->ssp.mclk_rate; + } else if (config->ssp.mclk_rate <= F_19200_kHz && + F_19200_kHz % config->ssp.mclk_rate == 0) { + mdivr_val = F_19200_kHz / config->ssp.mclk_rate; + } else { + trace_ssp_error("eck"); + ret = -EINVAL; + goto out; + } + + if (F_24576_kHz % config->ssp.bclk_rate == 0) { + /* select Audio Cardinal clock for M/N dividers */ + mdivc |= MNDSS(1); + mdiv = F_24576_kHz / config->ssp.bclk_rate; + /* select M/N output for bclk */ + sscr0 |= SSCR0_ECS; + } else if (F_19200_kHz % config->ssp.bclk_rate == 0) { + mdiv = F_19200_kHz / config->ssp.bclk_rate; + } else { + trace_ssp_error("ecl"); + ret = -EINVAL; + goto out; + } #endif
- /* BCLK is generated from MCLK - must be divisable */ - if (config->ssp.mclk_rate % config->ssp.bclk_rate) { - trace_ssp_error("ec5"); + switch (mdivr_val) { + case 1: + mdivr = 0x00000fff; /* bypass divider for MCLK */ + break; + case 2: + mdivr = 0x0; /* 1/2 */ + break; + case 4: + mdivr = 0x2; /* 1/4 */ + break; + case 8: + mdivr = 0x6; /* 1/8 */ + break; + default: + trace_ssp_error("ecm"); + ret = -EINVAL; + goto out; + } + + if (config->ssp.mclk_id > 1) { + trace_ssp_error("ecn"); ret = -EINVAL; goto out; }
/* divisor must be within SCR range */ - mdiv = (config->ssp.mclk_rate / config->ssp.bclk_rate) - 1; + mdiv -= 1; if (mdiv > (SSCR0_SCR_MASK >> 8)) { trace_ssp_error("ec6"); ret = -EINVAL; @@ -263,7 +351,6 @@ if CONFIG_APOLLOLAKE goto out; }
- /* must be enough BCLKs for data */ bdiv = config->ssp.bclk_rate / config->ssp.fsync_rate; if (bdiv < config->ssp.tdm_slot_width * config->ssp.tdm_slots) { @@ -457,24 +544,6 @@ if CONFIG_APOLLOLAKE else sscr0 |= SSCR0_DSIZE(data_size);
-#ifdef CONFIG_CANNONLAKE - mdivc = 0x1; -#else - if (config->ssp.mclk_rate == 24576000) { - /* enable PLL, bypass M/N dividers */ - mdivc = 0x00100001; - } else if (config->ssp.mclk_rate == 19200000) { - /* no PLL, use XTAl oscillator as source */ - mdivc = 0; - } else { - trace_ssp_error("eci"); - ret = -EINVAL; - goto out; - } -#endif - /* bypass divider for MCLK */ - mdivr = 0x00000fff; - /* setting TFT and RFT */ switch (config->ssp.sample_valid_bits) { case 16: @@ -522,7 +591,7 @@ if CONFIG_APOLLOLAKE
/* TODO: move this into M/N driver */ mn_reg_write(0x0, mdivc); - mn_reg_write(0x80, mdivr); + mn_reg_write(0x80 + config->ssp.mclk_id * 0x4, mdivr); mn_reg_write(0x100 + config->id * 0x8 + 0x0, i2s_m); mn_reg_write(0x100 + config->id * 0x8 + 0x4, i2s_n);
diff --git a/src/include/sof/ssp.h b/src/include/sof/ssp.h index d34b011..5244296 100644 --- a/src/include/sof/ssp.h +++ b/src/include/sof/ssp.h @@ -215,6 +215,11 @@ extern const struct dai_ops ssp_ops; #define SSIOC_SCOE BIT(5) #endif
+#if defined CONFIG_APOLLOLAKE || defined CONFIG_CANNONLAKE +#define MNDSS(x) ((x) << 20) +#define MCDSS(x) ((x) << 16) +#endif + /* tracing */ #define trace_ssp(__e) trace_event(TRACE_CLASS_SSP, __e) #define trace_ssp_error(__e) trace_error(TRACE_CLASS_SSP, __e)