I just realized how useless my response was...a bit lacking in specifics
When running 'speaker-test -D hw:0,0 -c 2' I get "playback open error: -22 Invalid argument" And similarly with 'arecord -f dat -D hw:0,6 -d 5 test.wav' we get: " arecord: main:828: audio open error: Invalid argument"
These commands are all working on my cometlake based system (admittedly with the 5.3 kernel) and the devices all show up with arecord/aplay.
Reviewing the dmesg (and I can attach the log if it's helpful) it starts off well but I noticed these messages: [ 3.003833] sof-audio-pci 0000:00:1f.3: Firmware info: version 1:1:0-5dd9a [ 3.003834] sof-audio-pci 0000:00:1f.3: Firmware: ABI 3:7:0 Kernel ABI 3:6:0 [ 3.003835] sof-audio-pci 0000:00:1f.3: warn: FW ABI is more recent than kernel [ 3.005845] sof-audio-pci 0000:00:1f.3: Topology: ABI 3:7:0 Kernel ABI 3:6:0 [ 3.005846] sof-audio-pci 0000:00:1f.3: warn: topology ABI is more recent than kernel
Which makes me wonder if I should be using an older firmware/topology version? Any thoughts and where would I get 'compatible' versions to try out?
I also see further down still: [ 1116.759684] sof-audio-pci 0000:00:1f.3: error: volume get failed to idle -16 [ 1209.452223] sof-audio-pci 0000:00:1f.3: error: no reply expected, received 0x0 [ 1212.452605] sof-audio-pci 0000:00:1f.3: error: load fw failed ret: -110 [ 1212.452628] sof-audio-pci 0000:00:1f.3: error: status = 0x00000000 panic = 0x00000000 [ 1212.452633] sof-audio-pci 0000:00:1f.3: error: failed to reset DSP [ 1212.452637] sof-audio-pci 0000:00:1f.3: error: failed to boot DSP firmware after resume -110 [ 1212.452655] sof-audio-pci 0000:00:1f.3: error: pcm open failed to resume -22 [ 1212.452658] sof-audio-pci 0000:00:1f.3: ASoC: can't open component 0000:00:1f.3: -22 [ 1212.452662] HDA Analog: ASoC: failed to start FE -22
But at this point I'm assuming it's all gone rather wrong.
Mark
-----Original Message----- From: Sound-open-firmware sound-open-firmware-bounces@alsa-project.org On Behalf Of Mark Pearson Sent: Thursday, September 12, 2019 8:54 AM To: Kai Vehmanen kai.vehmanen@linux.intel.com Cc: sound-open-firmware@alsa-project.org Subject: Re: [Sound-open-firmware] [External] Re: Whiskeylake support and kernel version
Hi Kai,
OK - good to know it should work. I'm seeing the card and devices show up under aplay/arecord but am not getting any audio out with speaker-test and haven't really gotten into debugging the input side yet
Mark
-----Original Message----- From: Kai Vehmanen kai.vehmanen@linux.intel.com Sent: Thursday, September 12, 2019 8:50 AM To: Mark Pearson mpearson@lenovo.com Cc: sound-open-firmware@alsa-project.org Subject: [External] Re: [Sound-open-firmware] Whiskeylake support and kernel version
Hi,
On Thu, 12 Sep 2019, Mark Pearson wrote:
I'm working on bringing up Debian on a Whiskeylake based system and having some problems with the audio not working. I'm running a 5.2.9 kernel with the 1.3 SOF firmware - will that support whiskeylake or do I need to update to newer (I also have a cometlake system and I needed 5.3 there - but it was more obvious in the kernel configuration)
yes, that should work. Based on a quick check, 5.2.9 should have all the needed patches in. What kind of issues you are having?
Br, Kai
_______________________________________________ Sound-open-firmware mailing list Sound-open-firmware@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/sound-open-firmware