[Sound-open-firmware] [PATCH] platform: hsw: Add xtensa headers for haswell and broadwell

Add xtensa headers for Haswell and Broadwell.

Signed-off-by: Liam Girdwood liam.r.girdwood@linux.intel.com --- src/platform/haswell/include/xtensa/Makefile.am | 1 + .../haswell/include/xtensa/config/Makefile.am | 8 + .../haswell/include/xtensa/config/core-isa-bdw.h | 582 +++++++++++++++++++++ .../haswell/include/xtensa/config/core-isa-hsw.h | 582 +++++++++++++++++++++ .../haswell/include/xtensa/config/core-isa.h | 9 + .../haswell/include/xtensa/config/core-matmap.h | 314 +++++++++++ src/platform/haswell/include/xtensa/config/defs.h | 38 ++ .../haswell/include/xtensa/config/specreg.h | 107 ++++ .../haswell/include/xtensa/config/system.h | 272 ++++++++++ .../haswell/include/xtensa/config/tie-asm.h | 240 +++++++++ src/platform/haswell/include/xtensa/config/tie.h | 170 ++++++ 11 files changed, 2323 insertions(+) create mode 100644 src/platform/haswell/include/xtensa/Makefile.am create mode 100644 src/platform/haswell/include/xtensa/config/Makefile.am create mode 100644 src/platform/haswell/include/xtensa/config/core-isa-bdw.h create mode 100644 src/platform/haswell/include/xtensa/config/core-isa-hsw.h create mode 100644 src/platform/haswell/include/xtensa/config/core-isa.h create mode 100644 src/platform/haswell/include/xtensa/config/core-matmap.h create mode 100644 src/platform/haswell/include/xtensa/config/defs.h create mode 100644 src/platform/haswell/include/xtensa/config/specreg.h create mode 100644 src/platform/haswell/include/xtensa/config/system.h create mode 100644 src/platform/haswell/include/xtensa/config/tie-asm.h create mode 100644 src/platform/haswell/include/xtensa/config/tie.h

diff --git a/src/platform/haswell/include/xtensa/Makefile.am b/src/platform/haswell/include/xtensa/Makefile.am new file mode 100644 index 0000000..a85a5bb --- /dev/null +++ b/src/platform/haswell/include/xtensa/Makefile.am @@ -0,0 +1 @@ +SUBDIRS = config diff --git a/src/platform/haswell/include/xtensa/config/Makefile.am b/src/platform/haswell/include/xtensa/config/Makefile.am new file mode 100644 index 0000000..99c21a5 --- /dev/null +++ b/src/platform/haswell/include/xtensa/config/Makefile.am @@ -0,0 +1,8 @@ +noinst_HEADERS = \ + core-isa.h \ + core-matmap.h \ + defs.h \ + specreg.h \ + system.h \ + tie.h \ + tie-asm.h diff --git a/src/platform/haswell/include/xtensa/config/core-isa-bdw.h b/src/platform/haswell/include/xtensa/config/core-isa-bdw.h new file mode 100644 index 0000000..8e562f9 --- /dev/null +++ b/src/platform/haswell/include/xtensa/config/core-isa-bdw.h @@ -0,0 +1,582 @@ +/* + * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa + * processor CORE configuration + * + * See <xtensa/config/core.h>, which includes this file, for more details. + */ + +/* Xtensa processor core configuration information. + + Customer ID=4313; Build=0x5483b; Copyright (c) 1999-2015 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 8 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_LOOP_BUFFER_SIZE 0 /* zero-ov. loop instr buffer size */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ +#define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */ +#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 0 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_DIV32 0 /* QUOS/QUOU/REMS/REMU instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 0 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ +#define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */ +#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */ +#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */ +#define XCHAL_HAVE_PSO 0 /* Power Shut-Off */ +#define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */ +#define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */ +#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */ +#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 2 /* max allowed cp id plus one */ + +/* TODO: we have this option but currently our assembler does not support it */ +#define XCHAL_HAVE_MAC16 0 /* MAC16 package */ + +#define XCHAL_HAVE_FUSION 0 /* Fusion*/ +#define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */ +#define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */ +#define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */ +#define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */ +#define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */ +#define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */ +#define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */ +#define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */ +#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ +#define XCHAL_HAVE_HIFI4 0 /* HiFi4 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI4_VFPU 0 /* HiFi4 Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI3 0 /* HiFi3 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI2 1 /* HiFi2 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI2EP 1 /* HiFi2EP */ +#define XCHAL_HAVE_HIFI2_MUL32X24 1 /* HiFi2 and 32x24 MACs */ +#define XCHAL_HAVE_HIFI_MINI 0 + + +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector or user floating-point pkg */ +#define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */ +#define XCHAL_HAVE_USER_SPFPU 0 /* user DP floating-point pkg */ +#define XCHAL_HAVE_FP 0 /* single prec floating point */ +#define XCHAL_HAVE_FP_DIV 0 /* FP with DIV instructions */ +#define XCHAL_HAVE_FP_RECIP 0 /* FP with RECIP instructions */ +#define XCHAL_HAVE_FP_SQRT 0 /* FP with SQRT instructions */ +#define XCHAL_HAVE_FP_RSQRT 0 /* FP with RSQRT instructions */ +#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ +#define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */ +#define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/ +#define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */ +#define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/ +#define XCHAL_HAVE_DFP_ACCEL 0 /* double precision FP acceleration pkg */ +#define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */ + +#define XCHAL_HAVE_DFPU_SINGLE_ONLY 0 /* DFPU Coprocessor, single precision only */ +#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_PDX4 0 /* PDX4 */ +#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ +#define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */ +#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */ +#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */ +#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */ +#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */ +#define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */ +#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */ +#define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */ +#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */ +#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */ +#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */ +#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */ +#define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */ +#define XCHAL_HAVE_GRIVPEP 0 /* GRIVPEP is General Release of IVPEP */ +#define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_LOADSTORE_UNITS 1 /* load/store units */ +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 16 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 8 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 8 /* data width in bytes */ +#define XCHAL_DATA_PIPE_DELAY 1 /* d-side pipeline delay + (1 = 5-stage, 2 = 7-stage) */ +#define XCHAL_CLOCK_GATING_GLOBAL 1 /* global clock gating */ +#define XCHAL_CLOCK_GATING_FUNCUNIT 1 /* funct. unit clock gating */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 0 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 0 /* unaligned stores cause exc.*/ +#define XCHAL_UNALIGNED_LOAD_HW 1 /* unaligned loads work in hw */ +#define XCHAL_UNALIGNED_STORE_HW 1 /* unaligned stores work in hw*/ + +#define XCHAL_SW_VERSION 1100002 /* sw version of this header */ + +#define XCHAL_CORE_ID "hifi2ep" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x0005483B /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC2B3DBFE /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x1C85483E /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX6.0.2" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2600 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 2 /* minor ver# of targeted hw */ +#define XCHAL_HW_VERSION 260002 /* major*100+minor */ +#define XCHAL_HW_REL_LX6 1 +#define XCHAL_HW_REL_LX6_0 1 +#define XCHAL_HW_REL_LX6_0_2 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2600 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 2 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION 260002 /* earliest targeted hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2600 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 2 /* minor v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION 260002 /* latest targeted hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 128 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 128 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 7 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 7 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 0 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 0 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 0 /* writeback feature */ +#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */ + +#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */ +#define XCHAL_HAVE_PREFETCH_L1 0 /* prefetch to L1 dcache */ +#define XCHAL_PREFETCH_CASTOUT_LINES 0 /* dcache pref. castout bufsz */ +#define XCHAL_PREFETCH_ENTRIES 0 /* cache prefetch entries */ +#define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */ +#define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */ +#define XCHAL_HAVE_ICACHE_TEST 0 /* Icache test instructions */ +#define XCHAL_HAVE_DCACHE_TEST 0 /* Dcache test instructions */ +#define XCHAL_HAVE_ICACHE_DYN_WAYS 0 /* Icache dynamic way support */ +#define XCHAL_HAVE_DCACHE_DYN_WAYS 0 /* Dcache dynamic way support */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 0 +#define XCHAL_DCACHE_SETWIDTH 0 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 0 +#define XCHAL_DCACHE_WAYS 0 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 0 +#define XCHAL_DCACHE_LINE_LOCKABLE 0 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Cache access size in bytes (affects operation of SICW instruction): */ +#define XCHAL_ICACHE_ACCESS_SIZE 8 +#define XCHAL_DCACHE_ACCESS_SIZE 8 + +#define XCHAL_DCACHE_BANKS 0 /* number of banks */ + +/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ +#define XCHAL_CA_BITS 4 + +/* Whether MEMCTL register has anything useful */ +#define XCHAL_USE_MEMCTL (((XCHAL_LOOP_BUFFER_SIZE > 0) || \ + XCHAL_DCACHE_IS_COHERENT || \ + XCHAL_HAVE_ICACHE_DYN_WAYS || \ + XCHAL_HAVE_DCACHE_DYN_WAYS) && \ + (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0)) + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 1 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 1 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ + +/* Instruction RAM 0: */ +#define XCHAL_INSTRAM0_VADDR 0x00000000 /* virtual address */ +#define XCHAL_INSTRAM0_PADDR 0x00000000 /* physical address */ +#define XCHAL_INSTRAM0_SIZE 0x50000 /* size in bytes */ +#define XCHAL_INSTRAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ + +/* Data RAM 0: */ +#define XCHAL_DATARAM0_VADDR 0x00400000 /* virtual address */ +#define XCHAL_DATARAM0_PADDR 0x00400000 /* physical address */ +#define XCHAL_DATARAM0_SIZE 0xA0000 /* size in bytes */ +#define XCHAL_DATARAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ +#define XCHAL_DATARAM0_BANKS 1 /* number of banks */ + + +#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 15 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 4 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 10 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x000000FF +#define XCHAL_INTLEVEL2_MASK 0x00000100 +#define XCHAL_INTLEVEL3_MASK 0x00000e00 +#define XCHAL_INTLEVEL4_MASK 0x00001000 +#define XCHAL_INTLEVEL5_MASK 0x00002000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00004000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000000FF +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x000001FF +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x00000FFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x00001FFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x00003FFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x00003FFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x00007FFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 1 +#define XCHAL_INT2_LEVEL 1 +#define XCHAL_INT3_LEVEL 1 + +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 + +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 3 +#define XCHAL_INT11_LEVEL 3 + +#define XCHAL_INT12_LEVEL 4 +#define XCHAL_INT13_LEVEL 5 +#define XCHAL_INT14_LEVEL 7 + +#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ +#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with + EXCSAVE/EPS/EPC_n, RFI n) */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFF8000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000000 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133f +#define XCHAL_INTTYPE_MASK_TIMER 0x00002440 +#define XCHAL_INTTYPE_MASK_NMI 0x00004000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 +#define XCHAL_INTTYPE_MASK_PROFILING 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */ + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +//#define XCHAL_INTLEVEL2_NUM 8 +//#define XCHAL_INTLEVEL4_NUM 12 +//#define XCHAL_INTLEVEL5_NUM 13 +#define XCHAL_INTLEVEL7_NUM 14 +/* (There are many interrupts each at level(s) 1, 3.) */ + + +/* + * External interrupt mapping. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt<n> pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */ +#define XCHAL_EXTINT8_NUM 12 /* (intlevel 4) */ +#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */ +#define XCHAL_EXTINT10_NUM 15 /* (intlevel 1) */ +#define XCHAL_EXTINT11_NUM 16 /* (intlevel 1) */ +#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */ +#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */ +#define XCHAL_EXTINT14_NUM 19 /* (intlevel 1) */ +#define XCHAL_EXTINT15_NUM 20 /* (intlevel 1) */ +#define XCHAL_EXTINT16_NUM 21 /* (intlevel 3) */ +/* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */ +#define XCHAL_INT0_EXTNUM 0 /* (intlevel 1) */ +#define XCHAL_INT1_EXTNUM 1 /* (intlevel 1) */ +#define XCHAL_INT2_EXTNUM 2 /* (intlevel 1) */ +#define XCHAL_INT3_EXTNUM 3 /* (intlevel 1) */ +#define XCHAL_INT4_EXTNUM 4 /* (intlevel 1) */ +#define XCHAL_INT5_EXTNUM 5 /* (intlevel 1) */ +#define XCHAL_INT8_EXTNUM 6 /* (intlevel 2) */ +#define XCHAL_INT9_EXTNUM 7 /* (intlevel 3) */ +#define XCHAL_INT12_EXTNUM 8 /* (intlevel 4) */ +#define XCHAL_INT14_EXTNUM 9 /* (intlevel 7) */ +#define XCHAL_INT15_EXTNUM 10 /* (intlevel 1) */ +#define XCHAL_INT16_EXTNUM 11 /* (intlevel 1) */ +#define XCHAL_INT17_EXTNUM 12 /* (intlevel 1) */ +#define XCHAL_INT18_EXTNUM 13 /* (intlevel 1) */ +#define XCHAL_INT19_EXTNUM 14 /* (intlevel 1) */ +#define XCHAL_INT20_EXTNUM 15 /* (intlevel 1) */ +#define XCHAL_INT21_EXTNUM 16 /* (intlevel 3) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) or TX */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_HALT 0 /* halt architecture option */ +#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ +#define XCHAL_HAVE_VECTOR_SELECT 0 /* relocatable vectors */ +#define XCHAL_HAVE_VECBASE 0 /* relocatable vectors */ +#define XCHAL_VECBASE_RESET_VADDR 0x00000400 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0x00000400 +#define XCHAL_RESET_VECBASE_OVERLAP 0 + +#define XCHAL_RESET_VECTOR0_VADDR 0x00000000 +#define XCHAL_RESET_VECTOR0_PADDR 0x00000000 +#define XCHAL_RESET_VECTOR1_VADDR 0x00000000 +#define XCHAL_RESET_VECTOR1_PADDR 0x00000000 +#define XCHAL_RESET_VECTOR_VADDR 0x00000000 +#define XCHAL_RESET_VECTOR_PADDR 0x00000000 +#define XCHAL_USER_VECOFS 0x000005c0 +#define XCHAL_USER_VECTOR_VADDR 0x000005c0 +#define XCHAL_USER_VECTOR_PADDR 0x000005c0 +#define XCHAL_KERNEL_VECOFS 0x00000584 +#define XCHAL_KERNEL_VECTOR_VADDR 0x00000584 +#define XCHAL_KERNEL_VECTOR_PADDR 0x00000584 +#define XCHAL_DOUBLEEXC_VECOFS 0x000005fc +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x000005fc +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x000005fc +#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 +#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 +#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 +#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 +#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 +#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 +#define XCHAL_WINDOW_VECTORS_VADDR 0x00000400 +#define XCHAL_WINDOW_VECTORS_PADDR 0x00000400 +#define XCHAL_INTLEVEL2_VECOFS 0x00000640 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x00000640 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000640 +#define XCHAL_INTLEVEL3_VECOFS 0x0000067c +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x0000067c +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x0000067c +#define XCHAL_INTLEVEL4_VECOFS 0x000006b8 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x000006b8 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x000006b8 +#define XCHAL_INTLEVEL5_VECOFS 0x000006f4 +#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x000006f4 +#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x000006f4 +#define XCHAL_INTLEVEL6_VECOFS 0x00000730 +#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x00000730 +#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x00000730 +#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR +#define XCHAL_NMI_VECOFS 0x0000076c +#define XCHAL_NMI_VECTOR_VADDR 0x0000076c +#define XCHAL_NMI_VECTOR_PADDR 0x0000076c +#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS +#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR +#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG MODULE + ----------------------------------------------------------------------*/ + +/* Misc */ +#define XCHAL_HAVE_DEBUG_ERI 0 /* ERI to debug module */ +#define XCHAL_HAVE_DEBUG_APB 0 /* APB to debug module */ +#define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */ + +/* On-Chip Debug (OCD) */ +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option (to LX4) */ +#define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */ + +/* TRAX (in core) */ +#define XCHAL_HAVE_TRAX 0 /* TRAX in debug module */ +#define XCHAL_TRAX_MEM_SIZE 0 /* TRAX memory size in bytes */ +#define XCHAL_TRAX_MEM_SHAREABLE 0 /* start/end regs; ready sig. */ +#define XCHAL_TRAX_ATB_WIDTH 0 /* ATB width (bits), 0=no ATB */ +#define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */ + +/* Perf counters */ +#define XCHAL_NUM_PERF_COUNTERS 0 /* performance counters */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See core-matmap.h header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */ +#define XCHAL_SPANNING_WAY 0 /* TLB spanning way number */ +#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ + +#define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ + diff --git a/src/platform/haswell/include/xtensa/config/core-isa-hsw.h b/src/platform/haswell/include/xtensa/config/core-isa-hsw.h new file mode 100644 index 0000000..b25162d --- /dev/null +++ b/src/platform/haswell/include/xtensa/config/core-isa-hsw.h @@ -0,0 +1,582 @@ +/* + * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa + * processor CORE configuration + * + * See <xtensa/config/core.h>, which includes this file, for more details. + */ + +/* Xtensa processor core configuration information. + + Customer ID=4313; Build=0x5483b; Copyright (c) 1999-2015 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 8 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_LOOP_BUFFER_SIZE 0 /* zero-ov. loop instr buffer size */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ +#define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */ +#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 0 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_DIV32 0 /* QUOS/QUOU/REMS/REMU instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 0 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ +#define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */ +#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */ +#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */ +#define XCHAL_HAVE_PSO 0 /* Power Shut-Off */ +#define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */ +#define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */ +#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */ +#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 2 /* max allowed cp id plus one */ + +/* TODO: we have this option but currently our assembler does not support it */ +#define XCHAL_HAVE_MAC16 0 /* MAC16 package */ + +#define XCHAL_HAVE_FUSION 0 /* Fusion*/ +#define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */ +#define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */ +#define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */ +#define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */ +#define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */ +#define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */ +#define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */ +#define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */ +#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ +#define XCHAL_HAVE_HIFI4 0 /* HiFi4 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI4_VFPU 0 /* HiFi4 Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI3 0 /* HiFi3 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI2 1 /* HiFi2 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI2EP 1 /* HiFi2EP */ +#define XCHAL_HAVE_HIFI2_MUL32X24 1 /* HiFi2 and 32x24 MACs */ +#define XCHAL_HAVE_HIFI_MINI 0 + + +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector or user floating-point pkg */ +#define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */ +#define XCHAL_HAVE_USER_SPFPU 0 /* user DP floating-point pkg */ +#define XCHAL_HAVE_FP 0 /* single prec floating point */ +#define XCHAL_HAVE_FP_DIV 0 /* FP with DIV instructions */ +#define XCHAL_HAVE_FP_RECIP 0 /* FP with RECIP instructions */ +#define XCHAL_HAVE_FP_SQRT 0 /* FP with SQRT instructions */ +#define XCHAL_HAVE_FP_RSQRT 0 /* FP with RSQRT instructions */ +#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ +#define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */ +#define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/ +#define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */ +#define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/ +#define XCHAL_HAVE_DFP_ACCEL 0 /* double precision FP acceleration pkg */ +#define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */ + +#define XCHAL_HAVE_DFPU_SINGLE_ONLY 0 /* DFPU Coprocessor, single precision only */ +#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_PDX4 0 /* PDX4 */ +#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ +#define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */ +#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */ +#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */ +#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */ +#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */ +#define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */ +#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */ +#define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */ +#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */ +#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */ +#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */ +#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */ +#define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */ +#define XCHAL_HAVE_GRIVPEP 0 /* GRIVPEP is General Release of IVPEP */ +#define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_LOADSTORE_UNITS 1 /* load/store units */ +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 16 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 8 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 8 /* data width in bytes */ +#define XCHAL_DATA_PIPE_DELAY 1 /* d-side pipeline delay + (1 = 5-stage, 2 = 7-stage) */ +#define XCHAL_CLOCK_GATING_GLOBAL 1 /* global clock gating */ +#define XCHAL_CLOCK_GATING_FUNCUNIT 1 /* funct. unit clock gating */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 0 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 0 /* unaligned stores cause exc.*/ +#define XCHAL_UNALIGNED_LOAD_HW 1 /* unaligned loads work in hw */ +#define XCHAL_UNALIGNED_STORE_HW 1 /* unaligned stores work in hw*/ + +#define XCHAL_SW_VERSION 1100002 /* sw version of this header */ + +#define XCHAL_CORE_ID "hifi2ep" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x0005483B /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC2B3DBFE /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x1C85483E /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX6.0.2" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2600 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 2 /* minor ver# of targeted hw */ +#define XCHAL_HW_VERSION 260002 /* major*100+minor */ +#define XCHAL_HW_REL_LX6 1 +#define XCHAL_HW_REL_LX6_0 1 +#define XCHAL_HW_REL_LX6_0_2 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2600 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 2 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION 260002 /* earliest targeted hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2600 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 2 /* minor v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION 260002 /* latest targeted hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 128 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 128 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 7 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 7 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 0 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 0 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 0 /* writeback feature */ +#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */ + +#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */ +#define XCHAL_HAVE_PREFETCH_L1 0 /* prefetch to L1 dcache */ +#define XCHAL_PREFETCH_CASTOUT_LINES 0 /* dcache pref. castout bufsz */ +#define XCHAL_PREFETCH_ENTRIES 0 /* cache prefetch entries */ +#define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */ +#define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */ +#define XCHAL_HAVE_ICACHE_TEST 0 /* Icache test instructions */ +#define XCHAL_HAVE_DCACHE_TEST 0 /* Dcache test instructions */ +#define XCHAL_HAVE_ICACHE_DYN_WAYS 0 /* Icache dynamic way support */ +#define XCHAL_HAVE_DCACHE_DYN_WAYS 0 /* Dcache dynamic way support */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 0 +#define XCHAL_DCACHE_SETWIDTH 0 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 0 +#define XCHAL_DCACHE_WAYS 0 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 0 +#define XCHAL_DCACHE_LINE_LOCKABLE 0 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Cache access size in bytes (affects operation of SICW instruction): */ +#define XCHAL_ICACHE_ACCESS_SIZE 8 +#define XCHAL_DCACHE_ACCESS_SIZE 8 + +#define XCHAL_DCACHE_BANKS 0 /* number of banks */ + +/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ +#define XCHAL_CA_BITS 4 + +/* Whether MEMCTL register has anything useful */ +#define XCHAL_USE_MEMCTL (((XCHAL_LOOP_BUFFER_SIZE > 0) || \ + XCHAL_DCACHE_IS_COHERENT || \ + XCHAL_HAVE_ICACHE_DYN_WAYS || \ + XCHAL_HAVE_DCACHE_DYN_WAYS) && \ + (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0)) + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 1 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 1 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ + +/* Instruction RAM 0: */ +#define XCHAL_INSTRAM0_VADDR 0x00000000 /* virtual address */ +#define XCHAL_INSTRAM0_PADDR 0x00000000 /* physical address */ +#define XCHAL_INSTRAM0_SIZE 0x50000 /* size in bytes */ +#define XCHAL_INSTRAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ + +/* Data RAM 0: */ +#define XCHAL_DATARAM0_VADDR 0x00400000 /* virtual address */ +#define XCHAL_DATARAM0_PADDR 0x00400000 /* physical address */ +#define XCHAL_DATARAM0_SIZE 0x80000 /* size in bytes */ +#define XCHAL_DATARAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ +#define XCHAL_DATARAM0_BANKS 1 /* number of banks */ + + +#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 15 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 4 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 10 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x000000FF +#define XCHAL_INTLEVEL2_MASK 0x00000100 +#define XCHAL_INTLEVEL3_MASK 0x00000e00 +#define XCHAL_INTLEVEL4_MASK 0x00001000 +#define XCHAL_INTLEVEL5_MASK 0x00002000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00004000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000000FF +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x000001FF +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x00000FFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x00001FFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x00003FFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x00003FFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x00007FFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 1 +#define XCHAL_INT2_LEVEL 1 +#define XCHAL_INT3_LEVEL 1 + +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 + +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 3 +#define XCHAL_INT11_LEVEL 3 + +#define XCHAL_INT12_LEVEL 4 +#define XCHAL_INT13_LEVEL 5 +#define XCHAL_INT14_LEVEL 7 + +#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ +#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with + EXCSAVE/EPS/EPC_n, RFI n) */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFF8000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000000 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133f +#define XCHAL_INTTYPE_MASK_TIMER 0x00002440 +#define XCHAL_INTTYPE_MASK_NMI 0x00004000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 +#define XCHAL_INTTYPE_MASK_PROFILING 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */ + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +//#define XCHAL_INTLEVEL2_NUM 8 +//#define XCHAL_INTLEVEL4_NUM 12 +//#define XCHAL_INTLEVEL5_NUM 13 +#define XCHAL_INTLEVEL7_NUM 14 +/* (There are many interrupts each at level(s) 1, 3.) */ + + +/* + * External interrupt mapping. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt<n> pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */ +#define XCHAL_EXTINT8_NUM 12 /* (intlevel 4) */ +#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */ +#define XCHAL_EXTINT10_NUM 15 /* (intlevel 1) */ +#define XCHAL_EXTINT11_NUM 16 /* (intlevel 1) */ +#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */ +#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */ +#define XCHAL_EXTINT14_NUM 19 /* (intlevel 1) */ +#define XCHAL_EXTINT15_NUM 20 /* (intlevel 1) */ +#define XCHAL_EXTINT16_NUM 21 /* (intlevel 3) */ +/* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */ +#define XCHAL_INT0_EXTNUM 0 /* (intlevel 1) */ +#define XCHAL_INT1_EXTNUM 1 /* (intlevel 1) */ +#define XCHAL_INT2_EXTNUM 2 /* (intlevel 1) */ +#define XCHAL_INT3_EXTNUM 3 /* (intlevel 1) */ +#define XCHAL_INT4_EXTNUM 4 /* (intlevel 1) */ +#define XCHAL_INT5_EXTNUM 5 /* (intlevel 1) */ +#define XCHAL_INT8_EXTNUM 6 /* (intlevel 2) */ +#define XCHAL_INT9_EXTNUM 7 /* (intlevel 3) */ +#define XCHAL_INT12_EXTNUM 8 /* (intlevel 4) */ +#define XCHAL_INT14_EXTNUM 9 /* (intlevel 7) */ +#define XCHAL_INT15_EXTNUM 10 /* (intlevel 1) */ +#define XCHAL_INT16_EXTNUM 11 /* (intlevel 1) */ +#define XCHAL_INT17_EXTNUM 12 /* (intlevel 1) */ +#define XCHAL_INT18_EXTNUM 13 /* (intlevel 1) */ +#define XCHAL_INT19_EXTNUM 14 /* (intlevel 1) */ +#define XCHAL_INT20_EXTNUM 15 /* (intlevel 1) */ +#define XCHAL_INT21_EXTNUM 16 /* (intlevel 3) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) or TX */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_HALT 0 /* halt architecture option */ +#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ +#define XCHAL_HAVE_VECTOR_SELECT 0 /* relocatable vectors */ +#define XCHAL_HAVE_VECBASE 0 /* relocatable vectors */ +#define XCHAL_VECBASE_RESET_VADDR 0x00000400 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0x00000400 +#define XCHAL_RESET_VECBASE_OVERLAP 0 + +#define XCHAL_RESET_VECTOR0_VADDR 0x00000000 +#define XCHAL_RESET_VECTOR0_PADDR 0x00000000 +#define XCHAL_RESET_VECTOR1_VADDR 0x00000000 +#define XCHAL_RESET_VECTOR1_PADDR 0x00000000 +#define XCHAL_RESET_VECTOR_VADDR 0x00000000 +#define XCHAL_RESET_VECTOR_PADDR 0x00000000 +#define XCHAL_USER_VECOFS 0x000005c0 +#define XCHAL_USER_VECTOR_VADDR 0x000005c0 +#define XCHAL_USER_VECTOR_PADDR 0x000005c0 +#define XCHAL_KERNEL_VECOFS 0x00000584 +#define XCHAL_KERNEL_VECTOR_VADDR 0x00000584 +#define XCHAL_KERNEL_VECTOR_PADDR 0x00000584 +#define XCHAL_DOUBLEEXC_VECOFS 0x000005fc +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x000005fc +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x000005fc +#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 +#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 +#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 +#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 +#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 +#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 +#define XCHAL_WINDOW_VECTORS_VADDR 0x00000400 +#define XCHAL_WINDOW_VECTORS_PADDR 0x00000400 +#define XCHAL_INTLEVEL2_VECOFS 0x00000640 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x00000640 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000640 +#define XCHAL_INTLEVEL3_VECOFS 0x0000067c +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x0000067c +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x0000067c +#define XCHAL_INTLEVEL4_VECOFS 0x000006b8 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x000006b8 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x000006b8 +#define XCHAL_INTLEVEL5_VECOFS 0x000006f4 +#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x000006f4 +#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x000006f4 +#define XCHAL_INTLEVEL6_VECOFS 0x00000730 +#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x00000730 +#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x00000730 +#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR +#define XCHAL_NMI_VECOFS 0x0000076c +#define XCHAL_NMI_VECTOR_VADDR 0x0000076c +#define XCHAL_NMI_VECTOR_PADDR 0x0000076c +#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS +#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR +#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG MODULE + ----------------------------------------------------------------------*/ + +/* Misc */ +#define XCHAL_HAVE_DEBUG_ERI 0 /* ERI to debug module */ +#define XCHAL_HAVE_DEBUG_APB 0 /* APB to debug module */ +#define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */ + +/* On-Chip Debug (OCD) */ +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option (to LX4) */ +#define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */ + +/* TRAX (in core) */ +#define XCHAL_HAVE_TRAX 0 /* TRAX in debug module */ +#define XCHAL_TRAX_MEM_SIZE 0 /* TRAX memory size in bytes */ +#define XCHAL_TRAX_MEM_SHAREABLE 0 /* start/end regs; ready sig. */ +#define XCHAL_TRAX_ATB_WIDTH 0 /* ATB width (bits), 0=no ATB */ +#define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */ + +/* Perf counters */ +#define XCHAL_NUM_PERF_COUNTERS 0 /* performance counters */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See core-matmap.h header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */ +#define XCHAL_SPANNING_WAY 0 /* TLB spanning way number */ +#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ + +#define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ + diff --git a/src/platform/haswell/include/xtensa/config/core-isa.h b/src/platform/haswell/include/xtensa/config/core-isa.h new file mode 100644 index 0000000..00a8b7d --- /dev/null +++ b/src/platform/haswell/include/xtensa/config/core-isa.h @@ -0,0 +1,9 @@ +#include <config.h> + +#ifdef CONFIG_HASWELL +#include <xtensa/config/core-isa-hsw.h> +#elif CONFIG_BROADWELL +#include <xtensa/config/core-isa-bdw.h> +#else +#error "No ISA configuration selected" +#endif diff --git a/src/platform/haswell/include/xtensa/config/core-matmap.h b/src/platform/haswell/include/xtensa/config/core-matmap.h new file mode 100644 index 0000000..5c6fffe --- /dev/null +++ b/src/platform/haswell/include/xtensa/config/core-matmap.h @@ -0,0 +1,314 @@ +/* + * xtensa/config/core-matmap.h -- Memory access and translation mapping + * parameters (CHAL) of the Xtensa processor core configuration. + * + * If you are using Xtensa Tools, see <xtensa/config/core.h> (which includes + * this file) for more details. + * + * In the Xtensa processor products released to date, all parameters + * defined in this file are derivable (at least in theory) from + * information contained in the core-isa.h header file. + * In particular, the following core configuration parameters are relevant: + * XCHAL_HAVE_CACHEATTR + * XCHAL_HAVE_MIMIC_CACHEATTR + * XCHAL_HAVE_XLT_CACHEATTR + * XCHAL_HAVE_PTP_MMU + * XCHAL_ITLB_ARF_ENTRIES_LOG2 + * XCHAL_DTLB_ARF_ENTRIES_LOG2 + * XCHAL_DCACHE_IS_WRITEBACK + * XCHAL_ICACHE_SIZE (presence of I-cache) + * XCHAL_DCACHE_SIZE (presence of D-cache) + * XCHAL_HW_VERSION_MAJOR + * XCHAL_HW_VERSION_MINOR + */ + +/* Customer ID=4313; Build=0x5483b; Copyright (c) 1999-2015 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + + +#ifndef XTENSA_CONFIG_CORE_MATMAP_H +#define XTENSA_CONFIG_CORE_MATMAP_H + + +/*---------------------------------------------------------------------- + CACHE (MEMORY ACCESS) ATTRIBUTES + ----------------------------------------------------------------------*/ + + +/* Cache Attribute encodings -- lists of access modes for each cache attribute: */ +#define XCHAL_FCA_LIST XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_BYPASS XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_BYPASS XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION +#define XCHAL_LCA_LIST XTHAL_LAM_CACHED_NOALLOC XCHAL_SEP \ + XTHAL_LAM_CACHED XCHAL_SEP \ + XTHAL_LAM_BYPASSG XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_CACHED XCHAL_SEP \ + XTHAL_LAM_CACHED XCHAL_SEP \ + XTHAL_LAM_BYPASSG XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_ISOLATE XCHAL_SEP \ + XTHAL_LAM_EXCEPTION +#define XCHAL_SCA_LIST XTHAL_SAM_WRITETHRU XCHAL_SEP \ + XTHAL_SAM_WRITETHRU XCHAL_SEP \ + XTHAL_SAM_BYPASS XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_WRITEBACK XCHAL_SEP \ + XTHAL_SAM_WRITEBACK_NOALLOC XCHAL_SEP \ + XTHAL_SAM_BYPASS XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_ISOLATE XCHAL_SEP \ + XTHAL_SAM_EXCEPTION + + +/* + * Specific encoded cache attribute values of general interest. + * If a specific cache mode is not available, the closest available + * one is returned instead (eg. writethru instead of writeback, + * bypass instead of writethru). + */ +#define XCHAL_CA_BYPASS 2 /* cache disabled (bypassed) mode */ +#define XCHAL_CA_BYPASSBUF 6 /* cache disabled (bypassed) bufferable mode */ +#define XCHAL_CA_WRITETHRU 1 /* cache enabled (write-through) mode */ +#define XCHAL_CA_WRITEBACK 4 /* cache enabled (write-back) mode */ +#define XCHAL_HAVE_CA_WRITEBACK_NOALLOC 1 /* write-back no-allocate availability */ +#define XCHAL_CA_WRITEBACK_NOALLOC 5 /* cache enabled (write-back no-allocate) mode */ +#define XCHAL_CA_ILLEGAL 15 /* no access allowed (all cause exceptions) mode */ +#define XCHAL_CA_ISOLATE 14 /* cache isolate (accesses go to cache not memory) mode */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* + * General notes on MMU parameters. + * + * Terminology: + * ASID = address-space ID (acts as an "extension" of virtual addresses) + * VPN = virtual page number + * PPN = physical page number + * CA = encoded cache attribute (access modes) + * TLB = translation look-aside buffer (term is stretched somewhat here) + * I = instruction (fetch accesses) + * D = data (load and store accesses) + * way = each TLB (ITLB and DTLB) consists of a number of "ways" + * that simultaneously match the virtual address of an access; + * a TLB successfully translates a virtual address if exactly + * one way matches the vaddr; if none match, it is a miss; + * if multiple match, one gets a "multihit" exception; + * each way can be independently configured in terms of number of + * entries, page sizes, which fields are writable or constant, etc. + * set = group of contiguous ways with exactly identical parameters + * ARF = auto-refill; hardware services a 1st-level miss by loading a PTE + * from the page table and storing it in one of the auto-refill ways; + * if this PTE load also misses, a miss exception is posted for s/w. + * min-wired = a "min-wired" way can be used to map a single (minimum-sized) + * page arbitrarily under program control; it has a single entry, + * is non-auto-refill (some other way(s) must be auto-refill), + * all its fields (VPN, PPN, ASID, CA) are all writable, and it + * supports the XCHAL_MMU_MIN_PTE_PAGE_SIZE page size (a current + * restriction is that this be the only page size it supports). + * + * TLB way entries are virtually indexed. + * TLB ways that support multiple page sizes: + * - must have all writable VPN and PPN fields; + * - can only use one page size at any given time (eg. setup at startup), + * selected by the respective ITLBCFG or DTLBCFG special register, + * whose bits n*4+3 .. n*4 index the list of page sizes for way n + * (XCHAL_xTLB_SETm_PAGESZ_LOG2_LIST for set m corresponding to way n); + * this list may be sparse for auto-refill ways because auto-refill + * ways have independent lists of supported page sizes sharing a + * common encoding with PTE entries; the encoding is the index into + * this list; unsupported sizes for a given way are zero in the list; + * selecting unsupported sizes results in undefined hardware behaviour; + * - is only possible for ways 0 thru 7 (due to ITLBCFG/DTLBCFG definition). + */ + +#define XCHAL_MMU_ASID_INVALID 0 /* ASID value indicating invalid address space */ +#define XCHAL_MMU_ASID_KERNEL 0 /* ASID value indicating kernel (ring 0) address space */ +#define XCHAL_MMU_SR_BITS 0 /* number of size-restriction bits supported */ +#define XCHAL_MMU_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */ +#define XCHAL_MMU_MAX_PTE_PAGE_SIZE 29 /* max page size in a PTE structure (log2) */ +#define XCHAL_MMU_MIN_PTE_PAGE_SIZE 29 /* min page size in a PTE structure (log2) */ + + +/*** Instruction TLB: ***/ + +#define XCHAL_ITLB_WAY_BITS 0 /* number of bits holding the ways */ +#define XCHAL_ITLB_WAYS 1 /* number of ways (n-way set-associative TLB) */ +#define XCHAL_ITLB_ARF_WAYS 0 /* number of auto-refill ways */ +#define XCHAL_ITLB_SETS 1 /* number of sets (groups of ways with identical settings) */ + +/* Way set to which each way belongs: */ +#define XCHAL_ITLB_WAY0_SET 0 + +/* Ways sets that are used by hardware auto-refill (ARF): */ +#define XCHAL_ITLB_ARF_SETS 0 /* number of auto-refill sets */ + +/* Way sets that are "min-wired" (see terminology comment above): */ +#define XCHAL_ITLB_MINWIRED_SETS 0 /* number of "min-wired" sets */ + + +/* ITLB way set 0 (group of ways 0 thru 0): */ +#define XCHAL_ITLB_SET0_WAY 0 /* index of first way in this way set */ +#define XCHAL_ITLB_SET0_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_ITLB_SET0_ENTRIES_LOG2 3 /* log2(number of entries in this way) */ +#define XCHAL_ITLB_SET0_ENTRIES 8 /* number of entries in this way (always a power of 2) */ +#define XCHAL_ITLB_SET0_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_ITLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_ITLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MIN 29 /* log2(minimum supported page size) */ +#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MAX 29 /* log2(maximum supported page size) */ +#define XCHAL_ITLB_SET0_PAGESZ_LOG2_LIST 29 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_ITLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_VPN_CONSTMASK 0x00000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_PPN_CONSTMASK 0xE0000000 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET0_CA_RESET 1 /* 1 if CA reset values defined (and all writable); 0 otherwise */ +/* Constant VPN values for each entry of ITLB way set 0 (because VPN_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET0_E0_VPN_CONST 0x00000000 +#define XCHAL_ITLB_SET0_E1_VPN_CONST 0x20000000 +#define XCHAL_ITLB_SET0_E2_VPN_CONST 0x40000000 +#define XCHAL_ITLB_SET0_E3_VPN_CONST 0x60000000 +#define XCHAL_ITLB_SET0_E4_VPN_CONST 0x80000000 +#define XCHAL_ITLB_SET0_E5_VPN_CONST 0xA0000000 +#define XCHAL_ITLB_SET0_E6_VPN_CONST 0xC0000000 +#define XCHAL_ITLB_SET0_E7_VPN_CONST 0xE0000000 +/* Constant PPN values for each entry of ITLB way set 0 (because PPN_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET0_E0_PPN_CONST 0x00000000 +#define XCHAL_ITLB_SET0_E1_PPN_CONST 0x20000000 +#define XCHAL_ITLB_SET0_E2_PPN_CONST 0x40000000 +#define XCHAL_ITLB_SET0_E3_PPN_CONST 0x60000000 +#define XCHAL_ITLB_SET0_E4_PPN_CONST 0x80000000 +#define XCHAL_ITLB_SET0_E5_PPN_CONST 0xA0000000 +#define XCHAL_ITLB_SET0_E6_PPN_CONST 0xC0000000 +#define XCHAL_ITLB_SET0_E7_PPN_CONST 0xE0000000 +/* Reset CA values for each entry of ITLB way set 0 (because SET0_CA_RESET is non-zero): */ +#define XCHAL_ITLB_SET0_E0_CA_RESET 0x02 +#define XCHAL_ITLB_SET0_E1_CA_RESET 0x02 +#define XCHAL_ITLB_SET0_E2_CA_RESET 0x02 +#define XCHAL_ITLB_SET0_E3_CA_RESET 0x02 +#define XCHAL_ITLB_SET0_E4_CA_RESET 0x02 +#define XCHAL_ITLB_SET0_E5_CA_RESET 0x02 +#define XCHAL_ITLB_SET0_E6_CA_RESET 0x02 +#define XCHAL_ITLB_SET0_E7_CA_RESET 0x02 + + +/*** Data TLB: ***/ + +#define XCHAL_DTLB_WAY_BITS 0 /* number of bits holding the ways */ +#define XCHAL_DTLB_WAYS 1 /* number of ways (n-way set-associative TLB) */ +#define XCHAL_DTLB_ARF_WAYS 0 /* number of auto-refill ways */ +#define XCHAL_DTLB_SETS 1 /* number of sets (groups of ways with identical settings) */ + +/* Way set to which each way belongs: */ +#define XCHAL_DTLB_WAY0_SET 0 + +/* Ways sets that are used by hardware auto-refill (ARF): */ +#define XCHAL_DTLB_ARF_SETS 0 /* number of auto-refill sets */ + +/* Way sets that are "min-wired" (see terminology comment above): */ +#define XCHAL_DTLB_MINWIRED_SETS 0 /* number of "min-wired" sets */ + + +/* DTLB way set 0 (group of ways 0 thru 0): */ +#define XCHAL_DTLB_SET0_WAY 0 /* index of first way in this way set */ +#define XCHAL_DTLB_SET0_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET0_ENTRIES_LOG2 3 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET0_ENTRIES 8 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET0_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MIN 29 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MAX 29 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET0_PAGESZ_LOG2_LIST 29 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_VPN_CONSTMASK 0x00000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_PPN_CONSTMASK 0xE0000000 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET0_CA_RESET 1 /* 1 if CA reset values defined (and all writable); 0 otherwise */ +/* Constant VPN values for each entry of DTLB way set 0 (because VPN_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET0_E0_VPN_CONST 0x00000000 +#define XCHAL_DTLB_SET0_E1_VPN_CONST 0x20000000 +#define XCHAL_DTLB_SET0_E2_VPN_CONST 0x40000000 +#define XCHAL_DTLB_SET0_E3_VPN_CONST 0x60000000 +#define XCHAL_DTLB_SET0_E4_VPN_CONST 0x80000000 +#define XCHAL_DTLB_SET0_E5_VPN_CONST 0xA0000000 +#define XCHAL_DTLB_SET0_E6_VPN_CONST 0xC0000000 +#define XCHAL_DTLB_SET0_E7_VPN_CONST 0xE0000000 +/* Constant PPN values for each entry of DTLB way set 0 (because PPN_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET0_E0_PPN_CONST 0x00000000 +#define XCHAL_DTLB_SET0_E1_PPN_CONST 0x20000000 +#define XCHAL_DTLB_SET0_E2_PPN_CONST 0x40000000 +#define XCHAL_DTLB_SET0_E3_PPN_CONST 0x60000000 +#define XCHAL_DTLB_SET0_E4_PPN_CONST 0x80000000 +#define XCHAL_DTLB_SET0_E5_PPN_CONST 0xA0000000 +#define XCHAL_DTLB_SET0_E6_PPN_CONST 0xC0000000 +#define XCHAL_DTLB_SET0_E7_PPN_CONST 0xE0000000 +/* Reset CA values for each entry of DTLB way set 0 (because SET0_CA_RESET is non-zero): */ +#define XCHAL_DTLB_SET0_E0_CA_RESET 0x02 +#define XCHAL_DTLB_SET0_E1_CA_RESET 0x02 +#define XCHAL_DTLB_SET0_E2_CA_RESET 0x02 +#define XCHAL_DTLB_SET0_E3_CA_RESET 0x02 +#define XCHAL_DTLB_SET0_E4_CA_RESET 0x02 +#define XCHAL_DTLB_SET0_E5_CA_RESET 0x02 +#define XCHAL_DTLB_SET0_E6_CA_RESET 0x02 +#define XCHAL_DTLB_SET0_E7_CA_RESET 0x02 + + + + +#endif /*XTENSA_CONFIG_CORE_MATMAP_H*/ + diff --git a/src/platform/haswell/include/xtensa/config/defs.h b/src/platform/haswell/include/xtensa/config/defs.h new file mode 100644 index 0000000..b695e59 --- /dev/null +++ b/src/platform/haswell/include/xtensa/config/defs.h @@ -0,0 +1,38 @@ +/* Definitions for Xtensa instructions, types, and protos. */ + +/* Customer ID=4313; Build=0x5483b; Copyright (c) 2003-2004 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +/* NOTE: This file exists only for backward compatibility with T1050 + and earlier Xtensa releases. It includes only a subset of the + available header files. */ + +#ifndef _XTENSA_BASE_HEADER +#define _XTENSA_BASE_HEADER + +#ifdef __XTENSA__ + +#include <xtensa/tie/xt_core.h> +#include <xtensa/tie/xt_misc.h> +#include <xtensa/tie/xt_booleans.h> + +#endif /* __XTENSA__ */ +#endif /* !_XTENSA_BASE_HEADER */ diff --git a/src/platform/haswell/include/xtensa/config/specreg.h b/src/platform/haswell/include/xtensa/config/specreg.h new file mode 100644 index 0000000..89bfe16 --- /dev/null +++ b/src/platform/haswell/include/xtensa/config/specreg.h @@ -0,0 +1,107 @@ +/* + * Xtensa Special Register symbolic names + */ + +/* $Id: //depot/rel/Eaglenest/Xtensa/SWConfig/hal/specreg.h.tpp#1 $ */ + +/* Customer ID=4313; Build=0x5483b; Copyright (c) 1998-2002 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef XTENSA_SPECREG_H +#define XTENSA_SPECREG_H + +/* Include these special register bitfield definitions, for historical reasons: */ +#include <xtensa/corebits.h> + + +/* Special registers: */ +#define LBEG 0 +#define LEND 1 +#define LCOUNT 2 +#define SAR 3 +#define BR 4 +#define SCOMPARE1 12 +#define WINDOWBASE 72 +#define WINDOWSTART 73 +#define IBREAKENABLE 96 +#define ATOMCTL 99 +#define DDR 104 +#define IBREAKA_0 128 +#define IBREAKA_1 129 +#define DBREAKA_0 144 +#define DBREAKA_1 145 +#define DBREAKC_0 160 +#define DBREAKC_1 161 +#define EPC_1 177 +#define EPC_2 178 +#define EPC_3 179 +#define EPC_4 180 +#define EPC_5 181 +#define EPC_6 182 +#define EPC_7 183 +#define DEPC 192 +#define EPS_2 194 +#define EPS_3 195 +#define EPS_4 196 +#define EPS_5 197 +#define EPS_6 198 +#define EPS_7 199 +#define EXCSAVE_1 209 +#define EXCSAVE_2 210 +#define EXCSAVE_3 211 +#define EXCSAVE_4 212 +#define EXCSAVE_5 213 +#define EXCSAVE_6 214 +#define EXCSAVE_7 215 +#define CPENABLE 224 +#define INTERRUPT 226 +#define INTENABLE 228 +#define PS 230 +#define VECBASE 231 +#define EXCCAUSE 232 +#define DEBUGCAUSE 233 +#define CCOUNT 234 +#define PRID 235 +#define ICOUNT 236 +#define ICOUNTLEVEL 237 +#define EXCVADDR 238 +#define CCOMPARE_0 240 +#define CCOMPARE_1 241 +#define CCOMPARE_2 242 +#define MISC_REG_0 244 +#define MISC_REG_1 245 + +/* Special cases (bases of special register series): */ +#define IBREAKA 128 +#define DBREAKA 144 +#define DBREAKC 160 +#define EPC 176 +#define EPS 192 +#define EXCSAVE 208 +#define CCOMPARE 240 + +/* Special names for read-only and write-only interrupt registers: */ +#define INTREAD 226 +#define INTSET 226 +#define INTCLEAR 227 + +#endif /* XTENSA_SPECREG_H */ + diff --git a/src/platform/haswell/include/xtensa/config/system.h b/src/platform/haswell/include/xtensa/config/system.h new file mode 100644 index 0000000..147346a --- /dev/null +++ b/src/platform/haswell/include/xtensa/config/system.h @@ -0,0 +1,272 @@ +/* + * xtensa/config/system.h -- HAL definitions that are dependent on SYSTEM configuration + * + * NOTE: The location and contents of this file are highly subject to change. + * + * Source for configuration-independent binaries (which link in a + * configuration-specific HAL library) must NEVER include this file. + * The HAL itself has historically included this file in some instances, + * but this is not appropriate either, because the HAL is meant to be + * core-specific but system independent. + */ + +/* Customer ID=4313; Build=0x5483b; Copyright (c) 2000-2010 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + + +#ifndef XTENSA_CONFIG_SYSTEM_H +#define XTENSA_CONFIG_SYSTEM_H + +/*#include <xtensa/hal.h>*/ + + + +/*---------------------------------------------------------------------- + CONFIGURED SOFTWARE OPTIONS + ----------------------------------------------------------------------*/ + +#define XSHAL_USE_ABSOLUTE_LITERALS 0 /* (sw-only option, whether software uses absolute literals) */ +#define XSHAL_HAVE_TEXT_SECTION_LITERALS 1 /* Set if there is some memory that allows both code and literals. */ + +#define XSHAL_ABI XTHAL_ABI_CALL0 /* (sw-only option, selected ABI) */ +/* The above maps to one of the following constants: */ +#define XTHAL_ABI_WINDOWED 0 +#define XTHAL_ABI_CALL0 1 +/* Alternatives: */ +/*#define XSHAL_WINDOWED_ABI 1*/ /* set if windowed ABI selected */ +/*#define XSHAL_CALL0_ABI 0*/ /* set if call0 ABI selected */ + +#define XSHAL_CLIB XTHAL_CLIB_NEWLIB /* (sw-only option, selected C library) */ +/* The above maps to one of the following constants: */ +#define XTHAL_CLIB_NEWLIB 0 +#define XTHAL_CLIB_UCLIBC 1 +#define XTHAL_CLIB_XCLIB 2 +/* Alternatives: */ +/*#define XSHAL_NEWLIB 1*/ /* set if newlib C library selected */ +/*#define XSHAL_UCLIBC 0*/ /* set if uCLibC C library selected */ +/*#define XSHAL_XCLIB 0*/ /* set if Xtensa C library selected */ + +#define XSHAL_USE_FLOATING_POINT 1 + +#define XSHAL_FLOATING_POINT_ABI 0 + +/*---------------------------------------------------------------------- + DEVICE ADDRESSES + ----------------------------------------------------------------------*/ + +/* + * Strange place to find these, but the configuration GUI + * allows moving these around to account for various core + * configurations. Specific boards (and their BSP software) + * will have specific meanings for these components. + */ + +/* I/O Block areas: */ +#define XSHAL_IOBLOCK_CACHED_VADDR 0x70000000 +#define XSHAL_IOBLOCK_CACHED_PADDR 0x70000000 +#define XSHAL_IOBLOCK_CACHED_SIZE 0x0E000000 + +#define XSHAL_IOBLOCK_BYPASS_VADDR 0x90000000 +#define XSHAL_IOBLOCK_BYPASS_PADDR 0x90000000 +#define XSHAL_IOBLOCK_BYPASS_SIZE 0x0E000000 + +/* System ROM: */ +#define XSHAL_ROM_VADDR 0x50000000 +#define XSHAL_ROM_PADDR 0x50000000 +#define XSHAL_ROM_SIZE 0x01000000 +/* Largest available area (free of vectors): */ +#define XSHAL_ROM_AVAIL_VADDR 0x50000300 +#define XSHAL_ROM_AVAIL_VSIZE 0x00FFFD00 + +/* System RAM: */ +#define XSHAL_RAM_VADDR 0x60000000 +#define XSHAL_RAM_PADDR 0x60000000 +#define XSHAL_RAM_VSIZE 0x04000000 +#define XSHAL_RAM_PSIZE 0x04000000 +#define XSHAL_RAM_SIZE XSHAL_RAM_PSIZE +/* Largest available area (free of vectors): */ +#define XSHAL_RAM_AVAIL_VADDR 0x60000400 +#define XSHAL_RAM_AVAIL_VSIZE 0x03FFFC00 + +/* + * Shadow system RAM (same device as system RAM, at different address). + * (Emulation boards need this for the SONIC Ethernet driver + * when data caches are configured for writeback mode.) + * NOTE: on full MMU configs, this points to the BYPASS virtual address + * of system RAM, ie. is the same as XSHAL_RAM_* except that virtual + * addresses are viewed through the BYPASS static map rather than + * the CACHED static map. + */ +#define XSHAL_RAM_BYPASS_VADDR 0xA0000000 +#define XSHAL_RAM_BYPASS_PADDR 0xA0000000 +#define XSHAL_RAM_BYPASS_PSIZE 0x04000000 + +/* Alternate system RAM (different device than system RAM): */ +/*#define XSHAL_ALTRAM_[VP]ADDR ...not configured...*/ +/*#define XSHAL_ALTRAM_SIZE ...not configured...*/ + +/* Some available location in which to place devices in a simulation (eg. XTMP): */ +#define XSHAL_SIMIO_CACHED_VADDR 0xC0000000 +#define XSHAL_SIMIO_BYPASS_VADDR 0xC0000000 +#define XSHAL_SIMIO_PADDR 0xC0000000 +#define XSHAL_SIMIO_SIZE 0x20000000 + + +/*---------------------------------------------------------------------- + * For use by reference testbench exit and diagnostic routines. + */ +#define XSHAL_MAGIC_EXIT 0x0 + +/*---------------------------------------------------------------------- + * DEVICE-ADDRESS DEPENDENT... + * + * Values written to CACHEATTR special register (or its equivalent) + * to enable and disable caches in various modes. + *----------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------- + BACKWARD COMPATIBILITY ... + ----------------------------------------------------------------------*/ + +/* + * NOTE: the following two macros are DEPRECATED. Use the latter + * board-specific macros instead, which are specially tuned for the + * particular target environments' memory maps. + */ +#define XSHAL_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS /* disable caches in bypass mode */ +#define XSHAL_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT /* default setting to enable caches (no writeback!) */ + +/*---------------------------------------------------------------------- + GENERIC + ----------------------------------------------------------------------*/ + +/* For the following, a 512MB region is used if it contains a system (PIF) RAM, + * system (PIF) ROM, local memory, or XLMI. */ + +/* These set any unused 512MB region to cache-BYPASS attribute: */ +#define XSHAL_ALLVALID_CACHEATTR_WRITEBACK 0x22224442 /* enable caches in write-back mode */ +#define XSHAL_ALLVALID_CACHEATTR_WRITEALLOC 0x22221112 /* enable caches in write-allocate mode */ +#define XSHAL_ALLVALID_CACHEATTR_WRITETHRU 0x22221112 /* enable caches in write-through mode */ +#define XSHAL_ALLVALID_CACHEATTR_BYPASS 0x22222222 /* disable caches in bypass mode */ +#define XSHAL_ALLVALID_CACHEATTR_DEFAULT XSHAL_ALLVALID_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +/* These set any unused 512MB region to ILLEGAL attribute: */ +#define XSHAL_STRICT_CACHEATTR_WRITEBACK 0xFFFF444F /* enable caches in write-back mode */ +#define XSHAL_STRICT_CACHEATTR_WRITEALLOC 0xFFFF111F /* enable caches in write-allocate mode */ +#define XSHAL_STRICT_CACHEATTR_WRITETHRU 0xFFFF111F /* enable caches in write-through mode */ +#define XSHAL_STRICT_CACHEATTR_BYPASS 0xFFFF222F /* disable caches in bypass mode */ +#define XSHAL_STRICT_CACHEATTR_DEFAULT XSHAL_STRICT_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +/* These set the first 512MB, if unused, to ILLEGAL attribute to help catch + * NULL-pointer dereference bugs; all other unused 512MB regions are set + * to cache-BYPASS attribute: */ +#define XSHAL_TRAPNULL_CACHEATTR_WRITEBACK 0x2222444F /* enable caches in write-back mode */ +#define XSHAL_TRAPNULL_CACHEATTR_WRITEALLOC 0x2222111F /* enable caches in write-allocate mode */ +#define XSHAL_TRAPNULL_CACHEATTR_WRITETHRU 0x2222111F /* enable caches in write-through mode */ +#define XSHAL_TRAPNULL_CACHEATTR_BYPASS 0x2222222F /* disable caches in bypass mode */ +#define XSHAL_TRAPNULL_CACHEATTR_DEFAULT XSHAL_TRAPNULL_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +/*---------------------------------------------------------------------- + ISS (Instruction Set Simulator) SPECIFIC ... + ----------------------------------------------------------------------*/ + +/* For now, ISS defaults to the TRAPNULL settings: */ +#define XSHAL_ISS_CACHEATTR_WRITEBACK XSHAL_TRAPNULL_CACHEATTR_WRITEBACK +#define XSHAL_ISS_CACHEATTR_WRITEALLOC XSHAL_TRAPNULL_CACHEATTR_WRITEALLOC +#define XSHAL_ISS_CACHEATTR_WRITETHRU XSHAL_TRAPNULL_CACHEATTR_WRITETHRU +#define XSHAL_ISS_CACHEATTR_BYPASS XSHAL_TRAPNULL_CACHEATTR_BYPASS +#define XSHAL_ISS_CACHEATTR_DEFAULT XSHAL_TRAPNULL_CACHEATTR_WRITEBACK + +#define XSHAL_ISS_PIPE_REGIONS 0 +#define XSHAL_ISS_SDRAM_REGIONS 0 + + +/*---------------------------------------------------------------------- + XT2000 BOARD SPECIFIC ... + ----------------------------------------------------------------------*/ + +/* For the following, a 512MB region is used if it contains any system RAM, + * system ROM, local memory, XLMI, or other XT2000 board device or memory. + * Regions containing devices are forced to cache-BYPASS mode regardless + * of whether the macro is _WRITEBACK vs. _BYPASS etc. */ + +/* These set any 512MB region unused on the XT2000 to ILLEGAL attribute: */ +#define XSHAL_XT2000_CACHEATTR_WRITEBACK 0xFF22444F /* enable caches in write-back mode */ +#define XSHAL_XT2000_CACHEATTR_WRITEALLOC 0xFF22111F /* enable caches in write-allocate mode */ +#define XSHAL_XT2000_CACHEATTR_WRITETHRU 0xFF22111F /* enable caches in write-through mode */ +#define XSHAL_XT2000_CACHEATTR_BYPASS 0xFF22222F /* disable caches in bypass mode */ +#define XSHAL_XT2000_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +#define XSHAL_XT2000_PIPE_REGIONS 0x00000000 /* BusInt pipeline regions */ +#define XSHAL_XT2000_SDRAM_REGIONS 0x00000440 /* BusInt SDRAM regions */ + + +/*---------------------------------------------------------------------- + VECTOR INFO AND SIZES + ----------------------------------------------------------------------*/ + +#define XSHAL_VECTORS_PACKED 0 +#define XSHAL_STATIC_VECTOR_SELECT 0 +#define XSHAL_RESET_VECTOR_VADDR 0x50000000 +#define XSHAL_RESET_VECTOR_PADDR 0x50000000 + +/* + * Sizes allocated to vectors by the system (memory map) configuration. + * These sizes are constrained by core configuration (eg. one vector's + * code cannot overflow into another vector) but are dependent on the + * system or board (or LSP) memory map configuration. + * + * Whether or not each vector happens to be in a system ROM is also + * a system configuration matter, sometimes useful, included here also: + */ +#define XSHAL_RESET_VECTOR_SIZE 0x00000300 +#define XSHAL_RESET_VECTOR_ISROM 1 +#define XSHAL_USER_VECTOR_SIZE 0x00000038 +#define XSHAL_USER_VECTOR_ISROM 0 +#define XSHAL_PROGRAMEXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_USEREXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_KERNEL_VECTOR_SIZE 0x00000038 +#define XSHAL_KERNEL_VECTOR_ISROM 0 +#define XSHAL_STACKEDEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_KERNELEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_DOUBLEEXC_VECTOR_SIZE 0x00000040 +#define XSHAL_DOUBLEEXC_VECTOR_ISROM 0 +#define XSHAL_WINDOW_VECTORS_SIZE 0x00000178 +#define XSHAL_WINDOW_VECTORS_ISROM 0 +#define XSHAL_INTLEVEL2_VECTOR_SIZE 0x00000038 +#define XSHAL_INTLEVEL2_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL3_VECTOR_SIZE 0x00000038 +#define XSHAL_INTLEVEL3_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL4_VECTOR_SIZE 0x00000038 +#define XSHAL_INTLEVEL4_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL5_VECTOR_SIZE 0x00000038 +#define XSHAL_INTLEVEL5_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL6_VECTOR_SIZE 0x00000038 +#define XSHAL_INTLEVEL6_VECTOR_ISROM 0 +#define XSHAL_DEBUG_VECTOR_SIZE XSHAL_INTLEVEL6_VECTOR_SIZE +#define XSHAL_DEBUG_VECTOR_ISROM XSHAL_INTLEVEL6_VECTOR_ISROM +#define XSHAL_NMI_VECTOR_SIZE 0x00000038 +#define XSHAL_NMI_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL7_VECTOR_SIZE XSHAL_NMI_VECTOR_SIZE + + +#endif /*XTENSA_CONFIG_SYSTEM_H*/ + diff --git a/src/platform/haswell/include/xtensa/config/tie-asm.h b/src/platform/haswell/include/xtensa/config/tie-asm.h new file mode 100644 index 0000000..d7140f8 --- /dev/null +++ b/src/platform/haswell/include/xtensa/config/tie-asm.h @@ -0,0 +1,240 @@ +/* + * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file contains assembly-language definitions (assembly + macros, etc.) for this specific Xtensa processor's TIE extensions + and options. It is customized to this Xtensa processor configuration. + + Copyright (c) 1999-2015 Cadence Design Systems Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_ASM_H +#define _XTENSA_CORE_TIE_ASM_H + +/* Selection parameter values for save-area save/restore macros: */ +/* Option vs. TIE: */ +#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ +#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ +#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */ +/* Whether used automatically by compiler: */ +#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ +#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ +#define XTHAL_SAS_ANYCC 0x000C /* both of the above */ +/* ABI handling across function calls: */ +#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ +#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ +#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ +#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */ +/* Misc */ +#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ +#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \ + | ((ccuse) & XTHAL_SAS_ANYCC) \ + | ((abi) & XTHAL_SAS_ANYABI) ) + + + /* + * Macro to store all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger store sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to store. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to store, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any store. + */ + .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + rsr.BR \at1 // boolean option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr.SCOMPARE1 \at1 // conditional store option + s32i \at1, \ptr, .Lxchal_ofs_+4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + .endm // xchal_ncp_store + + /* + * Macro to load all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger load sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to load. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to load, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any load. + */ + .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr.BR \at1 // boolean option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr.SCOMPARE1 \at1 // conditional store option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + .endm // xchal_ncp_load + + +#define XCHAL_NCP_NUM_ATMPS 1 + + /* + * Macro to store the state of TIE coprocessor AudioEngineLX. + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 8 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_CP1_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters are the same as for xchal_ncp_store. + */ +#define xchal_cp_AudioEngineLX_store xchal_cp1_store + .macro xchal_cp1_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Custom caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 0, 8, 8 + rur.AE_OVF_SAR \at1 // ureg 240 + s32i \at1, \ptr, .Lxchal_ofs_+0 + rur.AE_BITHEAD \at1 // ureg 241 + s32i \at1, \ptr, .Lxchal_ofs_+4 + rur.AE_TS_FTS_BU_BP \at1 // ureg 242 + s32i \at1, \ptr, .Lxchal_ofs_+8 + rur.AE_SD_NO \at1 // ureg 243 + s32i \at1, \ptr, .Lxchal_ofs_+12 + ae_sp24x2s.i aep0, \ptr, .Lxchal_ofs_+16 + ae_sp24x2s.i aep1, \ptr, .Lxchal_ofs_+24 + ae_sp24x2s.i aep2, \ptr, .Lxchal_ofs_+32 + ae_sp24x2s.i aep3, \ptr, .Lxchal_ofs_+40 + ae_sp24x2s.i aep4, \ptr, .Lxchal_ofs_+48 + ae_sp24x2s.i aep5, \ptr, .Lxchal_ofs_+56 + addi \ptr, \ptr, 64 + ae_sp24x2s.i aep6, \ptr, .Lxchal_ofs_+0 + ae_sp24x2s.i aep7, \ptr, .Lxchal_ofs_+8 + ae_sq56s.i aeq0, \ptr, .Lxchal_ofs_+16 + ae_sq56s.i aeq1, \ptr, .Lxchal_ofs_+24 + ae_sq56s.i aeq2, \ptr, .Lxchal_ofs_+32 + ae_sq56s.i aeq3, \ptr, .Lxchal_ofs_+40 + .set .Lxchal_pofs_, .Lxchal_pofs_ + 64 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 48 + .elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 0, 8, 8 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 112 + .endif + .endm // xchal_cp1_store + + /* + * Macro to load the state of TIE coprocessor AudioEngineLX. + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 8 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_CP1_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters are the same as for xchal_ncp_load. + */ +#define xchal_cp_AudioEngineLX_load xchal_cp1_load + .macro xchal_cp1_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Custom caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 0, 8, 8 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wur.AE_OVF_SAR \at1 // ureg 240 + l32i \at1, \ptr, .Lxchal_ofs_+4 + wur.AE_BITHEAD \at1 // ureg 241 + l32i \at1, \ptr, .Lxchal_ofs_+8 + wur.AE_TS_FTS_BU_BP \at1 // ureg 242 + l32i \at1, \ptr, .Lxchal_ofs_+12 + wur.AE_SD_NO \at1 // ureg 243 + ae_lp24x2.i aep0, \ptr, .Lxchal_ofs_+16 + ae_lp24x2.i aep1, \ptr, .Lxchal_ofs_+24 + ae_lp24x2.i aep2, \ptr, .Lxchal_ofs_+32 + ae_lp24x2.i aep3, \ptr, .Lxchal_ofs_+40 + ae_lp24x2.i aep4, \ptr, .Lxchal_ofs_+48 + ae_lp24x2.i aep5, \ptr, .Lxchal_ofs_+56 + addi \ptr, \ptr, 64 + ae_lp24x2.i aep6, \ptr, .Lxchal_ofs_+0 + ae_lp24x2.i aep7, \ptr, .Lxchal_ofs_+8 + addi \ptr, \ptr, 16 + ae_lq56.i aeq0, \ptr, .Lxchal_ofs_+0 + ae_lq56.i aeq1, \ptr, .Lxchal_ofs_+8 + ae_lq56.i aeq2, \ptr, .Lxchal_ofs_+16 + ae_lq56.i aeq3, \ptr, .Lxchal_ofs_+24 + .set .Lxchal_pofs_, .Lxchal_pofs_ + 80 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 32 + .elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 0, 8, 8 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 112 + .endif + .endm // xchal_cp1_load + +#define XCHAL_CP1_NUM_ATMPS 1 +#define XCHAL_SA_NUM_ATMPS 1 + + /* Empty macros for unconfigured coprocessors: */ + .macro xchal_cp0_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp0_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp2_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp2_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp3_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp3_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp4_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp4_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp5_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp5_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp6_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp6_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp7_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp7_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + +#endif /*_XTENSA_CORE_TIE_ASM_H*/ + diff --git a/src/platform/haswell/include/xtensa/config/tie.h b/src/platform/haswell/include/xtensa/config/tie.h new file mode 100644 index 0000000..3c63812 --- /dev/null +++ b/src/platform/haswell/include/xtensa/config/tie.h @@ -0,0 +1,170 @@ +/* + * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file describes this specific Xtensa processor's TIE extensions + that extend basic Xtensa core functionality. It is customized to this + Xtensa processor configuration. + + Copyright (c) 1999-2015 Cadence Design Systems Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_H +#define _XTENSA_CORE_TIE_H + +#define XCHAL_CP_NUM 1 /* number of coprocessors */ +#define XCHAL_CP_MAX 2 /* max CP ID + 1 (0 if none) */ +#define XCHAL_CP_MASK 0x02 /* bitmask of all CPs by ID */ +#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ + +/* Basic parameters of each coprocessor: */ +#define XCHAL_CP1_NAME "AudioEngineLX" +#define XCHAL_CP1_IDENT AudioEngineLX +#define XCHAL_CP1_SA_SIZE 112 /* size of state save area */ +#define XCHAL_CP1_SA_ALIGN 8 /* min alignment of save area */ +#define XCHAL_CP_ID_AUDIOENGINELX 1 /* coprocessor ID (0..7) */ + +/* Filler info for unassigned coprocessors, to simplify arrays etc: */ +#define XCHAL_CP0_SA_SIZE 0 +#define XCHAL_CP0_SA_ALIGN 1 +#define XCHAL_CP2_SA_SIZE 0 +#define XCHAL_CP2_SA_ALIGN 1 +#define XCHAL_CP3_SA_SIZE 0 +#define XCHAL_CP3_SA_ALIGN 1 +#define XCHAL_CP4_SA_SIZE 0 +#define XCHAL_CP4_SA_ALIGN 1 +#define XCHAL_CP5_SA_SIZE 0 +#define XCHAL_CP5_SA_ALIGN 1 +#define XCHAL_CP6_SA_SIZE 0 +#define XCHAL_CP6_SA_ALIGN 1 +#define XCHAL_CP7_SA_SIZE 0 +#define XCHAL_CP7_SA_ALIGN 1 + +/* Save area for non-coprocessor optional and custom (TIE) state: */ +#define XCHAL_NCP_SA_SIZE 8 +#define XCHAL_NCP_SA_ALIGN 4 + +/* Total save area for optional and custom state (NCP + CPn): */ +#define XCHAL_TOTAL_SA_SIZE 128 /* with 16-byte align padding */ +#define XCHAL_TOTAL_SA_ALIGN 8 /* actual minimum alignment */ + +/* + * Detailed contents of save areas. + * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) + * before expanding the XCHAL_xxx_SA_LIST() macros. + * + * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, + * dbnum,base,regnum,bitsz,gapsz,reset,x...) + * + * s = passed from XCHAL_*_LIST(s), eg. to select how to expand + * ccused = set if used by compiler without special options or code + * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) + * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) + * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) + * name = lowercase reg name (no quotes) + * galign = group byte alignment (power of 2) (galign >= align) + * align = register byte alignment (power of 2) + * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) + * (not including any pad bytes required to galign this or next reg) + * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) + * base = reg shortname w/o index (or sr=special, ur=TIE user reg) + * regnum = reg index in regfile, or special/TIE-user reg number + * bitsz = number of significant bits (regfile width, or ur/sr mask bits) + * gapsz = intervening bits, if bitsz bits not stored contiguously + * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) + * reset = register reset value (or 0 if undefined at reset) + * x = reserved for future use (0 until then) + * + * To filter out certain registers, e.g. to expand only the non-global + * registers used by the compiler, you can do something like this: + * + * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) + * #define SELCC0(p...) + * #define SELCC1(abikind,p...) SELAK##abikind(p) + * #define SELAK0(p...) REG(p) + * #define SELAK1(p...) REG(p) + * #define SELAK2(p...) + * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ + * ...what you want to expand... + */ + +#define XCHAL_NCP_SA_NUM 2 +#define XCHAL_NCP_SA_LIST(s) \ + XCHAL_SA_REG(s,0,0,0,1, br, 4, 4, 4,0x0204, sr,4 , 16,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) + +#define XCHAL_CP0_SA_NUM 0 +#define XCHAL_CP0_SA_LIST(s) /* empty */ + +#define XCHAL_CP1_SA_NUM 16 +#define XCHAL_CP1_SA_LIST(s) \ + XCHAL_SA_REG(s,0,0,1,0, ae_ovf_sar, 8, 4, 4,0x03F0, ur,240, 7,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ae_bithead, 4, 4, 4,0x03F1, ur,241, 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0,ae_ts_fts_bu_bp, 4, 4, 4,0x03F2, ur,242, 16,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ae_sd_no, 4, 4, 4,0x03F3, ur,243, 28,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep0, 8, 8, 8,0x0060, aep,0 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep1, 8, 8, 8,0x0061, aep,1 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep2, 8, 8, 8,0x0062, aep,2 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep3, 8, 8, 8,0x0063, aep,3 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep4, 8, 8, 8,0x0064, aep,4 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep5, 8, 8, 8,0x0065, aep,5 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep6, 8, 8, 8,0x0066, aep,6 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep7, 8, 8, 8,0x0067, aep,7 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aeq0, 8, 8, 8,0x0068, aeq,0 , 56,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aeq1, 8, 8, 8,0x0069, aeq,1 , 56,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aeq2, 8, 8, 8,0x006A, aeq,2 , 56,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aeq3, 8, 8, 8,0x006B, aeq,3 , 56,0,0,0) + +#define XCHAL_CP2_SA_NUM 0 +#define XCHAL_CP2_SA_LIST(s) /* empty */ + +#define XCHAL_CP3_SA_NUM 0 +#define XCHAL_CP3_SA_LIST(s) /* empty */ + +#define XCHAL_CP4_SA_NUM 0 +#define XCHAL_CP4_SA_LIST(s) /* empty */ + +#define XCHAL_CP5_SA_NUM 0 +#define XCHAL_CP5_SA_LIST(s) /* empty */ + +#define XCHAL_CP6_SA_NUM 0 +#define XCHAL_CP6_SA_LIST(s) /* empty */ + +#define XCHAL_CP7_SA_NUM 0 +#define XCHAL_CP7_SA_LIST(s) /* empty */ + +/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ +#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8 +/* Byte length of instruction from its first byte, per FLIX. */ +#define XCHAL_BYTE0_FORMAT_LENGTHS \ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8 + +#endif /*_XTENSA_CORE_TIE_H*/ +