On 6/12/2018 15:50, Liam Girdwood wrote:
On Tue, 2018-06-12 at 09:44 +0200, Lauda, Tomasz wrote:
Xiuli/Liam/Tomasz,
There is a regression due to the set of the bootloader patches on my up squared board. The audio is distorted now.
I reverted these patches and I could hear clean audio.
- Keqiao who may reported similar issue on UP^2.
Hi Keqiao, can you check what Ranjani founded?
Thanks, ~Keyon
Glitches are probably due to the problem with Host DMA not exiting L1 state on time. Bootloader patch enabled L1 cache on APL, so that's why you are seeing the problem now. It will be fixed after my pm_runtime patch will go through.
This may probably also benefit with the new HDA DMA GW optimal programming flow that Marcin has suggested too.
So if anyone has idea why there are duplicate data in the Memory Window? And a memset could not set all data in MW3. If these is also related with cache?
Thanks Xiuli
Liam
Intel Corporation (UK) Limited Registered No. 1134945 (England) Registered Office: Pipers Way, Swindon SN3 1RJ VAT No: 860 2173 47
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. _______________________________________________ Sound-open-firmware mailing list Sound-open-firmware@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/sound-open-firmware