Hi Liam,
How about for changing them to different tag names? Here in Clear Linux autospec cannot accept same tarball name in same package.
Best Regards, Wang, Long
-----Original Message----- From: Wang, Long1 Sent: Thursday, June 21, 2018 10:35 AM To: 'Liam Girdwood' liam.r.girdwood@linux.intel.com; Pan, Xiuli xiuli.pan@linux.intel.com; Keyon Jie yang.jie@linux.intel.com; sound-open-firmware@alsa-project.org Cc: Li, Jocelyn jocelyn.li@linux.intel.com Subject: RE: [Sound-open-firmware] Request to create a tag for https://github.com/01org/osadsp-crosstool-ng
Yes. Should be good since the tar ball is named according to its tag name.
-----Original Message----- From: Liam Girdwood [mailto:liam.r.girdwood@linux.intel.com] Sent: Wednesday, June 20, 2018 6:28 PM To: Wang, Long1 long1.wang@intel.com; Pan, Xiuli xiuli.pan@linux.intel.com; Keyon Jie yang.jie@linux.intel.com; sound-open-firmware@alsa-project.org Cc: Li, Jocelyn jocelyn.li@linux.intel.com Subject: Re: [Sound-open-firmware] Request to create a tag for https://github.com/01org/osadsp-crosstool-ng
On Wed, 2018-06-20 at 04:12 +0000, Wang, Long1 wrote:
Hi Liam,
Could you change sof-v1.2-gcc8.1.tar.gz to different tar names for crosstool and overlays? It makes very confusion in local build, especially in mock environment.
https://github.com/thesofproject/crosstool-ng/archive/sof-v1.2-gcc8.1. tar.gz https://github.com/thesofproject/xtensa-overlay/archive/sof-v1.2-gcc8. 1.tar.gz
is a different tag good enough for both ? i.e.
sof-ct-gcc8.1 sof-overlay-gcc8.1
?
Thanks
Liam