When DSP boots with timeout error try to reload firmware to keep best user expeirience.

Change-Id: Ic7377da687e7441a487c443f9de1ebae5967afa2 Signed-off-by: Szymon Mielczarek szymonx.mielczarek@intel.com Signed-off-by: Pawel Harlozinski pawel.harlozinski@linux.intel.com --- sound/soc/intel/skylake/bxt-sst.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 92a82e6b5fe6..fdf4c198445e 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -446,14 +446,19 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)

/* If core 1 was turned on for booting core 0, turn it off */ skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1)); + /* FIXME this FW recovery applies only for BXT */ if (ret == 0) { - dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__); - dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", + dev_warn(ctx->dev, + "DSP boot timeout: Error code=0x%x: FW status=0x%x. Reloading FW\n", sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); - dev_err(ctx->dev, "Failed to set core0 to D0 state\n"); - ret = -EIO; - goto err; + + ret = bxt_sst_init_fw(skl->dev, skl); + if (ret < 0) { + dev_err(ctx->dev, "Reload fw failed: %d. Failed to set core0 to D0 state\n", + ret); + goto err; + } } }

@@ -478,7 +483,6 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) if (core_id == SKL_DSP_CORE0_ID) core_mask |= SKL_DSP_CORE_MASK(1); skl_dsp_disable_core(ctx, core_mask); - return ret; }